[PATCH v2 3/4] sysinfo: rcar3: Use int instead of char for revision
Detlev Casanova
detlev.casanova at collabora.com
Wed Jun 28 21:32:38 CEST 2023
To be used with the sysinfo command, revision values must be considered
as integers, not chars as some boards will implement BOARD_REVISION_*
and might use numbers greater than 9.
Signed-off-by: Detlev Casanova <detlev.casanova at collabora.com>
---
drivers/sysinfo/rcar3.c | 104 ++++++++++++++++++++++++----------------
1 file changed, 62 insertions(+), 42 deletions(-)
diff --git a/drivers/sysinfo/rcar3.c b/drivers/sysinfo/rcar3.c
index 7b127986da7..450a4c26773 100644
--- a/drivers/sysinfo/rcar3.c
+++ b/drivers/sysinfo/rcar3.c
@@ -68,90 +68,110 @@ static void sysinfo_rcar_parse(struct sysinfo_rcar_priv *priv)
bool salvator_xs = false;
bool ebisu_4d = false;
bool condor_i = false;
- char rev_major = '?';
- char rev_minor = '?';
+ char model[64];
+ char rev[4] = "?.?";
+ u8 rev_major = 0;
+ u8 rev_minor = 0;
switch (board_id) {
case BOARD_SALVATOR_XS:
salvator_xs = true;
fallthrough;
case BOARD_SALVATOR_X:
+ snprintf(model, sizeof(model),
+ "Renesas Salvator-X%s board", salvator_xs ? "S" : "");
if (!(board_rev & ~1)) { /* Only rev 0 and 1 is valid */
- rev_major = '1';
- rev_minor = '0' + (board_rev & BIT(0));
+ rev_major = 1;
+ rev_minor = board_rev & BIT(0);
+ snprintf(rev, sizeof(rev), "%u.%u", rev_major, rev_minor);
}
- snprintf(priv->boardmodel, sizeof(priv->boardmodel),
- "Renesas Salvator-X%s board rev %c.%c",
- salvator_xs ? "S" : "", rev_major, rev_minor);
+
+ snprintf(priv->boardmodel, sizeof(priv->boardmodel), "%s rev %s",
+ model, rev);
+
return;
case BOARD_STARTER_KIT:
+ snprintf(priv->boardmodel, sizeof(priv->boardmodel),
+ "Renesas Starter Kit board");
if (!(board_rev & ~1)) { /* Only rev 0 and 1 is valid */
- rev_major = (board_rev & BIT(0)) ? '3' : '1';
- rev_minor = '0';
+ rev_major = (board_rev & BIT(0)) ? 3 : 1;
+ rev_minor = 0;
+ snprintf(rev, sizeof(rev), "%u.%u", rev_major, rev_minor);
}
- snprintf(priv->boardmodel, sizeof(priv->boardmodel),
- "Renesas Starter Kit board rev %c.%c",
- rev_major, rev_minor);
+ snprintf(priv->boardmodel, sizeof(priv->boardmodel), "%s rev %s",
+ model, rev);
return;
case BOARD_STARTER_KIT_PRE:
+ snprintf(priv->boardmodel, sizeof(priv->boardmodel),
+ "Renesas Starter Kit Premier board");
if (!(board_rev & ~3)) { /* Only rev 0..3 is valid */
- rev_major = (board_rev & BIT(1)) ? '2' : '1';
- rev_minor = (board_rev == 3) ? '1' : '0';
+ rev_major = (board_rev & BIT(1)) ? 2 : 1;
+ rev_minor = (board_rev == 3) ? 1 : 0;
+ snprintf(rev, sizeof(rev), "%u.%u", rev_major, rev_minor);
}
- snprintf(priv->boardmodel, sizeof(priv->boardmodel),
- "Renesas Starter Kit Premier board rev %c.%c",
- rev_major, rev_minor);
+ snprintf(priv->boardmodel, sizeof(priv->boardmodel), "%s rev %s",
+ model, rev);
return;
case BOARD_EAGLE:
+ snprintf(priv->boardmodel, sizeof(priv->boardmodel),
+ "Renesas Eagle board");
if (!board_rev) { /* Only rev 0 is valid */
- rev_major = '1';
- rev_minor = '0';
+ rev_major = 1;
+ rev_minor = 0;
+ snprintf(rev, sizeof(rev), "%u.%u", rev_major, rev_minor);
}
- snprintf(priv->boardmodel, sizeof(priv->boardmodel),
- "Renesas Eagle board rev %c.%c",
- rev_major, rev_minor);
+ snprintf(priv->boardmodel, sizeof(priv->boardmodel), "%s rev %s",
+ model, rev);
return;
case BOARD_EBISU_4D:
ebisu_4d = true;
fallthrough;
case BOARD_EBISU:
+ snprintf(priv->boardmodel, sizeof(priv->boardmodel),
+ "Renesas Ebisu%s board", ebisu_4d ? "-4D" : "");
if (!board_rev) { /* Only rev 0 is valid */
- rev_major = '1';
- rev_minor = '0';
+ rev_major = 1;
+ rev_minor = 0;
+ snprintf(rev, sizeof(rev), "%u.%u", rev_major, rev_minor);
}
- snprintf(priv->boardmodel, sizeof(priv->boardmodel),
- "Renesas Ebisu%s board rev %c.%c",
- ebisu_4d ? "-4D" : "", rev_major, rev_minor);
+ snprintf(priv->boardmodel, sizeof(priv->boardmodel), "%s rev %s",
+ model, rev);
return;
case BOARD_DRAAK:
+ snprintf(priv->boardmodel, sizeof(priv->boardmodel),
+ "Renesas Draak board");
if (!board_rev) { /* Only rev 0 is valid */
- rev_major = '1';
- rev_minor = '0';
+ rev_major = 1;
+ rev_minor = 0;
+ snprintf(rev, sizeof(rev), "%u.%u", rev_major, rev_minor);
}
- snprintf(priv->boardmodel, sizeof(priv->boardmodel),
- "Renesas Draak board rev %c.%c",
- rev_major, rev_minor);
+ snprintf(priv->boardmodel, sizeof(priv->boardmodel), "%s rev %s",
+ model, rev);
return;
case BOARD_KRIEK:
+ snprintf(priv->boardmodel, sizeof(priv->boardmodel),
+ "Renesas Kriek board");
if (!board_rev) { /* Only rev 0 is valid */
- rev_major = '1';
- rev_minor = '0';
+ rev_major = 1;
+ rev_minor = 0;
+ snprintf(rev, sizeof(rev), "%u.%u", rev_major, rev_minor);
}
- snprintf(priv->boardmodel, sizeof(priv->boardmodel),
- "Renesas Kriek board rev %c.%c",
- rev_major, rev_minor);
+ snprintf(priv->boardmodel, sizeof(priv->boardmodel), "%s rev %s",
+ model, rev);
return;
case BOARD_CONDOR_I:
condor_i = true;
fallthrough;
case BOARD_CONDOR:
+ snprintf(priv->boardmodel, sizeof(priv->boardmodel),
+ "Renesas Condor%s board", condor_i ? "-I" : "");
if (!board_rev) { /* Only rev 0 is valid */
- rev_major = '1';
- rev_minor = '0';
+ rev_major = 1;
+ rev_minor = 0;
+ snprintf(rev, sizeof(rev), "%u.%u", rev_major, rev_minor);
}
- snprintf(priv->boardmodel, sizeof(priv->boardmodel),
- "Renesas Condor%s board rev %c.%c",
- condor_i ? "-I" : "", rev_major, rev_minor);
+ snprintf(priv->boardmodel, sizeof(priv->boardmodel), "%s rev %s",
+ model, rev);
return;
default:
snprintf(priv->boardmodel, sizeof(priv->boardmodel),
--
2.39.3
More information about the U-Boot
mailing list