[PATCH v8 4/7] board: asus: transformer: add ASUS Transformer T30 family support
Svyatoslav Ryhel
clamor95 at gmail.com
Fri Jun 30 09:29:03 CEST 2023
The ASUS Transformer T30 family are 2-in-1 detachable tablets
and AiO developed by ASUS that run the Android operating system
(TF600T runs Windows RT and P1801-T runs Android and Windows).
The T30 Transformers feature a 10.1-inch display (apart P1801-T),
an Nvidia Tegra 3 quad-core chip, 1/2 GB of RAM, and 16/32 GB of
storage. Transformers board derives from Nvidia Cardhu development
board.
This patch brings support for 7 known Transformer devices:
- ASUS Transformer Prime TF201
- ASUS Transformer Pad TF300T/TF300TG/TF300TL
- ASUS VivoTab RT TF600T (Windows RT based)
- ASUS Transformer Infinity TF700T
- ASUS Portable AiO P1801-T
Tested-by: Andreas Westman Dorcsak <hedmoo at yahoo.com> # all devices
Signed-off-by: Svyatoslav Ryhel <clamor95 at gmail.com>
---
arch/arm/dts/Makefile | 7 +
arch/arm/dts/tegra30-asus-p1801-t.dts | 18 +
arch/arm/dts/tegra30-asus-tf201.dts | 9 +
arch/arm/dts/tegra30-asus-tf300t.dts | 18 +
arch/arm/dts/tegra30-asus-tf300tg.dts | 9 +
arch/arm/dts/tegra30-asus-tf300tl.dts | 9 +
arch/arm/dts/tegra30-asus-tf600t.dts | 89 +++++
arch/arm/dts/tegra30-asus-tf700t.dts | 13 +
arch/arm/dts/tegra30-asus-transformer.dtsi | 211 ++++++++++
arch/arm/mach-tegra/tegra30/Kconfig | 5 +
board/asus/transformer-t30/Kconfig | 23 ++
board/asus/transformer-t30/MAINTAINERS | 15 +
board/asus/transformer-t30/Makefile | 11 +
.../pinmux-config-transformer.h | 365 ++++++++++++++++++
.../transformer-t30/transformer-t30-spl.c | 41 ++
board/asus/transformer-t30/transformer-t30.c | 201 ++++++++++
configs/p1801-t.config | 2 +
configs/tf201.config | 2 +
configs/tf300t.config | 2 +
configs/tf300tg.config | 2 +
configs/tf300tl.config | 2 +
configs/tf600t.config | 4 +
configs/tf700t.config | 2 +
configs/transformer_t30_defconfig | 85 ++++
doc/board/asus/index.rst | 9 +
doc/board/asus/transformer_t30.rst | 116 ++++++
doc/board/index.rst | 1 +
include/configs/transformer-common.h | 94 +++++
include/configs/transformer-t30.h | 23 ++
29 files changed, 1388 insertions(+)
create mode 100644 arch/arm/dts/tegra30-asus-p1801-t.dts
create mode 100644 arch/arm/dts/tegra30-asus-tf201.dts
create mode 100644 arch/arm/dts/tegra30-asus-tf300t.dts
create mode 100644 arch/arm/dts/tegra30-asus-tf300tg.dts
create mode 100644 arch/arm/dts/tegra30-asus-tf300tl.dts
create mode 100644 arch/arm/dts/tegra30-asus-tf600t.dts
create mode 100644 arch/arm/dts/tegra30-asus-tf700t.dts
create mode 100644 arch/arm/dts/tegra30-asus-transformer.dtsi
create mode 100644 board/asus/transformer-t30/Kconfig
create mode 100644 board/asus/transformer-t30/MAINTAINERS
create mode 100644 board/asus/transformer-t30/Makefile
create mode 100644 board/asus/transformer-t30/pinmux-config-transformer.h
create mode 100644 board/asus/transformer-t30/transformer-t30-spl.c
create mode 100644 board/asus/transformer-t30/transformer-t30.c
create mode 100644 configs/p1801-t.config
create mode 100644 configs/tf201.config
create mode 100644 configs/tf300t.config
create mode 100644 configs/tf300tg.config
create mode 100644 configs/tf300tl.config
create mode 100644 configs/tf600t.config
create mode 100644 configs/tf700t.config
create mode 100644 configs/transformer_t30_defconfig
create mode 100644 doc/board/asus/index.rst
create mode 100644 doc/board/asus/transformer_t30.rst
create mode 100644 include/configs/transformer-common.h
create mode 100644 include/configs/transformer-t30.h
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 480269fa60..c87729d45e 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -237,6 +237,13 @@ dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
tegra20-ventana.dtb \
tegra20-colibri.dtb \
tegra30-apalis.dtb \
+ tegra30-asus-p1801-t.dtb \
+ tegra30-asus-tf201.dtb \
+ tegra30-asus-tf300t.dtb \
+ tegra30-asus-tf300tg.dtb \
+ tegra30-asus-tf300tl.dtb \
+ tegra30-asus-tf600t.dtb \
+ tegra30-asus-tf700t.dtb \
tegra30-beaver.dtb \
tegra30-cardhu.dtb \
tegra30-colibri.dtb \
diff --git a/arch/arm/dts/tegra30-asus-p1801-t.dts b/arch/arm/dts/tegra30-asus-p1801-t.dts
new file mode 100644
index 0000000000..4b2dc61713
--- /dev/null
+++ b/arch/arm/dts/tegra30-asus-p1801-t.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra30-asus-transformer.dtsi"
+
+/ {
+ model = "ASUS Portable AiO P1801-T";
+ compatible = "asus,p1801-t", "nvidia,tegra30";
+
+ /delete-node/ host1x at 50000000;
+ /delete-node/ pwm at 7000a000;
+
+ /delete-node/ backlight;
+ /delete-node/ panel;
+
+ /delete-node/ regulator-pnl;
+ /delete-node/ regulator-bl;
+};
diff --git a/arch/arm/dts/tegra30-asus-tf201.dts b/arch/arm/dts/tegra30-asus-tf201.dts
new file mode 100644
index 0000000000..54f359ef96
--- /dev/null
+++ b/arch/arm/dts/tegra30-asus-tf201.dts
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra30-asus-transformer.dtsi"
+
+/ {
+ model = "ASUS Transformer Prime TF201";
+ compatible = "asus,tf201", "nvidia,tegra30";
+};
diff --git a/arch/arm/dts/tegra30-asus-tf300t.dts b/arch/arm/dts/tegra30-asus-tf300t.dts
new file mode 100644
index 0000000000..db08488420
--- /dev/null
+++ b/arch/arm/dts/tegra30-asus-tf300t.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra30-asus-transformer.dtsi"
+
+/ {
+ model = "ASUS Transformer Pad TF300T";
+ compatible = "asus,tf300t", "nvidia,tegra30";
+
+ gpio at 6000d000 {
+ volume-buttons-hog {
+ gpio-hog;
+ gpios = <TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>,
+ <TEGRA_GPIO(K, 7) GPIO_ACTIVE_HIGH>;
+ output-low;
+ };
+ };
+};
diff --git a/arch/arm/dts/tegra30-asus-tf300tg.dts b/arch/arm/dts/tegra30-asus-tf300tg.dts
new file mode 100644
index 0000000000..6f42182c99
--- /dev/null
+++ b/arch/arm/dts/tegra30-asus-tf300tg.dts
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra30-asus-transformer.dtsi"
+
+/ {
+ model = "ASUS Transformer Pad 3G TF300TG";
+ compatible = "asus,tf300tg", "nvidia,tegra30";
+};
diff --git a/arch/arm/dts/tegra30-asus-tf300tl.dts b/arch/arm/dts/tegra30-asus-tf300tl.dts
new file mode 100644
index 0000000000..242f79170c
--- /dev/null
+++ b/arch/arm/dts/tegra30-asus-tf300tl.dts
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra30-asus-transformer.dtsi"
+
+/ {
+ model = "ASUS Transformer Pad LTE TF300TL";
+ compatible = "asus,tf300tl", "nvidia,tegra30";
+};
diff --git a/arch/arm/dts/tegra30-asus-tf600t.dts b/arch/arm/dts/tegra30-asus-tf600t.dts
new file mode 100644
index 0000000000..c9b8f4fa14
--- /dev/null
+++ b/arch/arm/dts/tegra30-asus-tf600t.dts
@@ -0,0 +1,89 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra30-asus-transformer.dtsi"
+
+/ {
+ model = "ASUS VivoTab RT TF600T";
+ compatible = "asus,tf600t", "nvidia,tegra30";
+
+ aliases {
+ spi0 = &spi4;
+ };
+
+ /delete-node/ host1x at 50000000;
+
+ pmic_i2c: i2c at 7000d000 {
+ /* Texas Instruments TPS659110 PMIC */
+ pmic: tps65911 at 2d {
+ regulators {
+ vdd_1v2_bl: vdd1 {
+ regulator-name = "vdd_1v2_backlight";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ ti,regulator-ext-sleep-control = <8>;
+ };
+
+ /delete-node/ ldo2;
+ /delete-node/ ldo3;
+
+ /* uSD slot VDDIO */
+ vddio_usd: ldo5 {
+ regulator-name = "vddio_sdmmc";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ avdd_dsi_csi: ldo6 {
+ regulator-name = "avdd_dsi_csi";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+ };
+ };
+ };
+
+ spi4: spi at 7000da00 {
+ status = "okay";
+ spi-max-frequency = <25000000>;
+
+ spi-flash at 1 {
+ compatible = "winbond,w25q32", "jedec,spi-nor";
+ reg = <1>;
+ spi-max-frequency = <20000000>;
+ };
+ };
+
+ backlight {
+ power-supply = <&vdd_1v2_bl>;
+ };
+
+ gpio-keys {
+ key-volume-up {
+ label = "Volume Up";
+ gpios = <&gpio TEGRA_GPIO(Q, 3) GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_UP>;
+ };
+
+ key-volume-down {
+ label = "Volume Down";
+ gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_DOWN>;
+ };
+ };
+
+ /delete-node/ panel;
+
+ vdd_usd: regulator-usd {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_usd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ /delete-node/ regulator-pnl;
+ /delete-node/ regulator-bl;
+};
diff --git a/arch/arm/dts/tegra30-asus-tf700t.dts b/arch/arm/dts/tegra30-asus-tf700t.dts
new file mode 100644
index 0000000000..d530527c9f
--- /dev/null
+++ b/arch/arm/dts/tegra30-asus-tf700t.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra30-asus-transformer.dtsi"
+
+/ {
+ model = "ASUS Transformer Infinity TF700T";
+ compatible = "asus,tf700t", "nvidia,tegra30";
+
+ /delete-node/ host1x at 50000000;
+
+ /delete-node/ panel;
+};
diff --git a/arch/arm/dts/tegra30-asus-transformer.dtsi b/arch/arm/dts/tegra30-asus-transformer.dtsi
new file mode 100644
index 0000000000..4eee1df084
--- /dev/null
+++ b/arch/arm/dts/tegra30-asus-transformer.dtsi
@@ -0,0 +1,211 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/input/input.h>
+
+#include "tegra30.dtsi"
+
+/ {
+ chosen {
+ stdout-path = &uarta;
+ };
+
+ aliases {
+ i2c0 = &pwr_i2c;
+ i2c1 = &gen1_i2c;
+
+ mmc0 = &sdmmc4; /* eMMC */
+ mmc1 = &sdmmc1; /* uSD slot */
+
+ rtc0 = &pmic;
+ rtc1 = "/rtc at 7000e000";
+
+ usb0 = &usb1;
+ usb1 = &usb3; /* Dock USB */
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x40000000>;
+ };
+
+ host1x at 50000000 {
+ dc at 54200000 {
+ rgb {
+ status = "okay";
+
+ nvidia,panel = <&panel>;
+ };
+ };
+ };
+
+ uarta: serial at 70006000 {
+ status = "okay";
+ };
+
+ pwm: pwm at 7000a000 {
+ status = "okay";
+ };
+
+ gen1_i2c: i2c at 7000c000 {
+ status = "okay";
+ clock-frequency = <100000>;
+ };
+
+ pwr_i2c: i2c at 7000d000 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ /* Texas Instruments TPS659110 PMIC */
+ pmic: tps65911 at 2d {
+ compatible = "ti,tps65911";
+ reg = <0x2d>;
+
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+
+ ti,system-power-controller;
+
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ regulators {
+ /* eMMC VDD */
+ vcore_emmc: ldo1 {
+ regulator-name = "vdd_emmc_core";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ /* uSD slot VDD */
+ vdd_usd: ldo2 {
+ regulator-name = "vdd_usd";
+ regulator-min-microvolt = <3100000>;
+ regulator-max-microvolt = <3100000>;
+ };
+
+ /* uSD slot VDDIO */
+ vddio_usd: ldo3 {
+ regulator-name = "vddio_usd";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3100000>;
+ };
+ };
+ };
+ };
+
+ sdmmc1: sdhci at 78000000 {
+ status = "okay";
+ bus-width = <4>;
+
+ cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+ power-gpios = <&gpio TEGRA_GPIO(D, 7) GPIO_ACTIVE_HIGH>;
+
+ vmmc-supply = <&vdd_usd>;
+ vqmmc-supply = <&vddio_usd>;
+ };
+
+ sdmmc4: sdhci at 78000600 {
+ status = "okay";
+ bus-width = <8>;
+ non-removable;
+ };
+
+ /* USB via ASUS connector */
+ usb1: usb at 7d000000 {
+ status = "okay";
+ dr_mode = "otg";
+ };
+
+ /* Dock's USB port */
+ usb3: usb at 7d008000 {
+ status = "okay";
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+
+ enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+ power-supply = <&vdd_5v0_bl>;
+ pwms = <&pwm 0 4000000>;
+
+ brightness-levels = <1 35 70 105 140 175 210 255>;
+ default-brightness-level = <5>;
+ };
+
+ /* PMIC has a built-in 32KHz oscillator which is used by PMC */
+ clk32k_in: clock-32k {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "pmic-oscillator";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ key-power {
+ label = "Power";
+ gpios = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_ENTER>;
+ };
+
+ key-volume-up {
+ label = "Volume Up";
+ gpios = <&gpio TEGRA_GPIO(Q, 2) GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_UP>;
+ };
+
+ key-volume-down {
+ label = "Volume Down";
+ gpios = <&gpio TEGRA_GPIO(Q, 3) GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_DOWN>;
+ };
+ };
+
+ panel: panel {
+ compatible = "simple-panel";
+
+ power-supply = <&vdd_pnl_reg>;
+ enable-gpios = <&gpio TEGRA_GPIO(N, 6) GPIO_ACTIVE_HIGH>;
+
+ backlight = <&backlight>;
+
+ display-timings {
+ timing at 0 {
+ /* 1280x800 at 60Hz */
+ clock-frequency = <68000000>;
+
+ hactive = <1280>;
+ hfront-porch = <48>;
+ hback-porch = <18>;
+ hsync-len = <30>;
+
+ vactive = <800>;
+ vfront-porch = <3>;
+ vback-porch = <12>;
+ vsync-len = <5>;
+ };
+ };
+ };
+
+ vdd_pnl_reg: regulator-pnl {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_panel";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio TEGRA_GPIO(W, 1) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vdd_5v0_bl: regulator-bl {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_5v0_bl";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ gpio = <&gpio TEGRA_GPIO(H, 3) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
diff --git a/arch/arm/mach-tegra/tegra30/Kconfig b/arch/arm/mach-tegra/tegra30/Kconfig
index 85b8ce294f..4f78d0ba97 100644
--- a/arch/arm/mach-tegra/tegra30/Kconfig
+++ b/arch/arm/mach-tegra/tegra30/Kconfig
@@ -24,6 +24,10 @@ config TARGET_TEC_NG
bool "Avionic Design TEC-NG board"
select BOARD_LATE_INIT
+config TARGET_TRANSFORMER_T30
+ bool "Asus Tegra30 Transformer board"
+ select BOARD_LATE_INIT
+
endchoice
config SYS_SOC
@@ -34,5 +38,6 @@ source "board/nvidia/beaver/Kconfig"
source "board/nvidia/cardhu/Kconfig"
source "board/toradex/colibri_t30/Kconfig"
source "board/avionic-design/tec-ng/Kconfig"
+source "board/asus/transformer-t30/Kconfig"
endif
diff --git a/board/asus/transformer-t30/Kconfig b/board/asus/transformer-t30/Kconfig
new file mode 100644
index 0000000000..3c36f4ada2
--- /dev/null
+++ b/board/asus/transformer-t30/Kconfig
@@ -0,0 +1,23 @@
+if TARGET_TRANSFORMER_T30
+
+config SYS_BOARD
+ default "transformer-t30"
+
+config SYS_VENDOR
+ default "asus"
+
+config SYS_CONFIG_NAME
+ default "transformer-t30"
+
+config TRANSFORMER_SPI_BOOT
+ bool "Enable support for SPI based flash"
+ select TEGRA20_SLINK
+ select DM_SPI_FLASH
+ select SPI_FLASH_WINBOND
+ default n
+ help
+ Tegra 3 based Transformers with Windows RT have core
+ boot sequence (BCT and EBT) on separate SPI FLASH
+ memory with 4MB size.
+
+endif
diff --git a/board/asus/transformer-t30/MAINTAINERS b/board/asus/transformer-t30/MAINTAINERS
new file mode 100644
index 0000000000..c6c15323b2
--- /dev/null
+++ b/board/asus/transformer-t30/MAINTAINERS
@@ -0,0 +1,15 @@
+TRANSFORMER BOARD
+M: Svyatoslav Ryhel <clamor95 at gmail.com>
+S: Maintained
+F: board/asus/transformer-t30/
+F: configs/p1801-t.config
+F: configs/tf201.config
+F: configs/tf300t.config
+F: configs/tf300tg.config
+F: configs/tf300tl.config
+F: configs/tf600t.config
+F: configs/tf700t.config
+F: configs/transformer_t30_defconfig
+F: doc/board/asus/transformer_t30.rst
+F: include/configs/transformer-common.h
+F: include/configs/transformer-t30.h
diff --git a/board/asus/transformer-t30/Makefile b/board/asus/transformer-t30/Makefile
new file mode 100644
index 0000000000..c083f2289b
--- /dev/null
+++ b/board/asus/transformer-t30/Makefile
@@ -0,0 +1,11 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2010-2012
+# NVIDIA Corporation <www.nvidia.com>
+#
+# (C) Copyright 2021
+# Svyatoslav Ryhel <clamor95 at gmail.com>
+
+obj-$(CONFIG_SPL_BUILD) += transformer-t30-spl.o
+
+obj-y += transformer-t30.o
diff --git a/board/asus/transformer-t30/pinmux-config-transformer.h b/board/asus/transformer-t30/pinmux-config-transformer.h
new file mode 100644
index 0000000000..96ff45d375
--- /dev/null
+++ b/board/asus/transformer-t30/pinmux-config-transformer.h
@@ -0,0 +1,365 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved.
+ *
+ * Copyright (c) 2021, Svyatoslav Ryhel.
+ */
+
+#ifndef _PINMUX_CONFIG_TRANSFORMER_H_
+#define _PINMUX_CONFIG_TRANSFORMER_H_
+
+#define DEFAULT_PINMUX(_pingrp, _mux, _pull, _tri, _io) \
+ { \
+ .pingrp = PMUX_PINGRP_##_pingrp, \
+ .func = PMUX_FUNC_##_mux, \
+ .pull = PMUX_PULL_##_pull, \
+ .tristate = PMUX_TRI_##_tri, \
+ .io = PMUX_PIN_##_io, \
+ .lock = PMUX_PIN_LOCK_DEFAULT, \
+ .od = PMUX_PIN_OD_DEFAULT, \
+ .ioreset = PMUX_PIN_IO_RESET_DEFAULT, \
+ }
+
+#define I2C_PINMUX(_pingrp, _mux, _pull, _tri, _io, _lock, _od) \
+ { \
+ .pingrp = PMUX_PINGRP_##_pingrp, \
+ .func = PMUX_FUNC_##_mux, \
+ .pull = PMUX_PULL_##_pull, \
+ .tristate = PMUX_TRI_##_tri, \
+ .io = PMUX_PIN_##_io, \
+ .lock = PMUX_PIN_LOCK_##_lock, \
+ .od = PMUX_PIN_OD_##_od, \
+ .ioreset = PMUX_PIN_IO_RESET_DEFAULT, \
+ }
+
+#define LV_PINMUX(_pingrp, _mux, _pull, _tri, _io, _lock, _ioreset) \
+ { \
+ .pingrp = PMUX_PINGRP_##_pingrp, \
+ .func = PMUX_FUNC_##_mux, \
+ .pull = PMUX_PULL_##_pull, \
+ .tristate = PMUX_TRI_##_tri, \
+ .io = PMUX_PIN_##_io, \
+ .lock = PMUX_PIN_LOCK_##_lock, \
+ .od = PMUX_PIN_OD_DEFAULT, \
+ .ioreset = PMUX_PIN_IO_RESET_##_ioreset \
+ }
+
+#define DEFAULT_PADCFG(_drvgrp, _slwf, _slwr, _drvup, _drvdn, _lpmd, _schmt, _hsm) \
+ { \
+ .drvgrp = PMUX_DRVGRP_##_drvgrp, \
+ .slwf = _slwf, \
+ .slwr = _slwr, \
+ .drvup = _drvup, \
+ .drvdn = _drvdn, \
+ .lpmd = PMUX_LPMD_##_lpmd, \
+ .schmt = PMUX_SCHMT_##_schmt, \
+ .hsm = PMUX_HSM_##_hsm, \
+ }
+
+static struct pmux_pingrp_config transformer_pinmux_common[] = {
+ /* SDMMC1 pinmux */
+ DEFAULT_PINMUX(SDMMC1_CLK_PZ0, SDMMC1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC1_CMD_PZ1, SDMMC1, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC1_DAT3_PY4, SDMMC1, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC1_DAT2_PY5, SDMMC1, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC1_DAT1_PY6, SDMMC1, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC1_DAT0_PY7, SDMMC1, UP, NORMAL, INPUT),
+
+ /* SDMMC3 pinmux */
+ DEFAULT_PINMUX(SDMMC3_CLK_PA6, SDMMC3, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_CMD_PA7, SDMMC3, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_DAT0_PB7, SDMMC3, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_DAT1_PB6, SDMMC3, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_DAT2_PB5, SDMMC3, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_DAT3_PB4, SDMMC3, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_DAT4_PD1, SDMMC3, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_DAT5_PD0, SDMMC3, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_DAT6_PD3, SDMMC3, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(SDMMC3_DAT7_PD4, SDMMC3, UP, NORMAL, INPUT),
+
+ /* SDMMC4 pinmux */
+ LV_PINMUX(SDMMC4_CLK_PCC4, SDMMC4, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_CMD_PT7, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_DAT0_PAA0, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_DAT1_PAA1, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_DAT2_PAA2, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_DAT3_PAA3, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_DAT4_PAA4, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_DAT5_PAA5, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_DAT6_PAA6, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_DAT7_PAA7, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(SDMMC4_RST_N_PCC3, RSVD1, DOWN, NORMAL, INPUT, DISABLE, DISABLE),
+
+ /* I2C pinmux */
+ I2C_PINMUX(GEN1_I2C_SCL_PC4, I2C1, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+ I2C_PINMUX(GEN1_I2C_SDA_PC5, I2C1, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+ I2C_PINMUX(GEN2_I2C_SCL_PT5, I2C2, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+ I2C_PINMUX(GEN2_I2C_SDA_PT6, I2C2, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+ I2C_PINMUX(CAM_I2C_SCL_PBB1, I2C3, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+ I2C_PINMUX(CAM_I2C_SDA_PBB2, I2C3, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+ I2C_PINMUX(DDC_SCL_PV4, I2C4, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+ I2C_PINMUX(DDC_SDA_PV5, I2C4, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+ I2C_PINMUX(PWR_I2C_SCL_PZ6, I2CPWR, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+ I2C_PINMUX(PWR_I2C_SDA_PZ7, I2CPWR, NORMAL, NORMAL, INPUT, DISABLE, ENABLE),
+
+ /* HDMI-CEC pinmux */
+ DEFAULT_PINMUX(HDMI_CEC_PEE3, CEC, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(HDMI_INT_PN7, RSVD1, NORMAL, TRISTATE, INPUT),
+
+ /* ULPI pinmux */
+ DEFAULT_PINMUX(ULPI_DATA0_PO1, UARTA, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(ULPI_DATA1_PO2, UARTA, DOWN, TRISTATE, INPUT),
+ DEFAULT_PINMUX(ULPI_DATA2_PO3, UARTA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(ULPI_DATA3_PO4, UARTA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(ULPI_DATA4_PO5, UARTA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(ULPI_DATA5_PO6, UARTA, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(ULPI_DATA6_PO7, UARTA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(ULPI_DATA7_PO0, UARTA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(ULPI_CLK_PY0, UARTD, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(ULPI_DIR_PY1, UARTD, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(ULPI_NXT_PY2, UARTD, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(ULPI_STP_PY3, UARTD, NORMAL, TRISTATE, OUTPUT),
+
+ /* DAP3 pinmux */
+ DEFAULT_PINMUX(DAP3_FS_PP0, I2S2, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(DAP3_DIN_PP1, I2S2, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(DAP3_DOUT_PP2, I2S2, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP3_SCLK_PP3, I2S2, NORMAL, NORMAL, INPUT),
+
+ DEFAULT_PINMUX(PV0, RSVD1, UP, TRISTATE, INPUT),
+ DEFAULT_PINMUX(PV2, RSVD1, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(PV3, RSVD1, NORMAL, TRISTATE, OUTPUT),
+
+ /* CLK2 pinmux */
+ DEFAULT_PINMUX(CLK2_OUT_PW5, EXTPERIPH2, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(CLK2_REQ_PCC5, DAP, NORMAL, NORMAL, INPUT),
+
+ /* LCD pinmux */
+ DEFAULT_PINMUX(LCD_PWR1_PC1, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_PWR2_PC6, DISPLAYA, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(LCD_SDIN_PZ2, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_SDOUT_PN5, DISPLAYA, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(LCD_WR_N_PZ3, DISPLAYA, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(LCD_CS0_N_PN4, DISPLAYA, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(LCD_DC0_PN6, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_SCK_PZ4, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_PWR0_PB2, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_PCLK_PB3, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_DE_PJ1, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_HSYNC_PJ3, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_VSYNC_PJ4, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D0_PE0, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D1_PE1, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D2_PE2, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D3_PE3, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D4_PE4, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D5_PE5, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D6_PE6, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D7_PE7, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D8_PF0, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D9_PF1, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D10_PF2, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D11_PF3, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D12_PF4, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D13_PF5, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D14_PF6, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D15_PF7, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D16_PM0, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D17_PM1, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D18_PM2, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D19_PM3, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D20_PM4, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D21_PM5, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D22_PM6, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_D23_PM7, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_CS1_N_PW0, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_M1_PW1, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(LCD_DC1_PD2, DISPLAYA, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(CRT_HSYNC_PV6, CRT, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(CRT_VSYNC_PV7, CRT, NORMAL, TRISTATE, OUTPUT),
+
+ /* VI-group pinmux */
+ LV_PINMUX(VI_D0_PT4, RSVD1, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_D1_PD5, SDMMC2, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_D2_PL0, SDMMC2, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_D3_PL1, SDMMC2, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_D4_PL2, VI, NORMAL, NORMAL, OUTPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_D5_PL3, SDMMC2, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_D6_PL4, VI, NORMAL, NORMAL, OUTPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_D7_PL5, SDMMC2, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_D8_PL6, SDMMC2, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_D9_PL7, SDMMC2, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_D10_PT2, RSVD1, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_D11_PT3, RSVD1, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_PCLK_PT0, RSVD1, UP, TRISTATE, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_MCLK_PT1, VI, UP, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_HSYNC_PD7, RSVD1, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+ LV_PINMUX(VI_VSYNC_PD6, RSVD1, NORMAL, NORMAL, INPUT, DISABLE, DISABLE),
+
+ /* UART-B pinmux */
+ DEFAULT_PINMUX(UART2_RXD_PC3, UARTB, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(UART2_TXD_PC2, UARTB, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(UART2_RTS_N_PJ6, UARTB, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(UART2_CTS_N_PJ5, UARTB, NORMAL, NORMAL, INPUT),
+
+ /* UART-C pinmux */
+ DEFAULT_PINMUX(UART3_TXD_PW6, UARTC, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(UART3_RXD_PW7, UARTC, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(UART3_CTS_N_PA1, UARTC, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(UART3_RTS_N_PC0, UARTC, NORMAL, NORMAL, OUTPUT),
+
+ /* U-gpio group pinmux */
+ DEFAULT_PINMUX(PU0, RSVD1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(PU1, RSVD1, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(PU2, RSVD1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(PU3, RSVD1, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(PU4, RSVD1, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(PU5, PWM2, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(PU6, RSVD1, DOWN, NORMAL, INPUT),
+
+ /* DAP4 pinmux */
+ DEFAULT_PINMUX(DAP4_FS_PP4, I2S3, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP4_DIN_PP5, I2S3, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP4_DOUT_PP6, I2S3, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP4_SCLK_PP7, I2S3, NORMAL, NORMAL, INPUT),
+
+ /* CLK3 pinmux */
+ DEFAULT_PINMUX(CLK3_OUT_PEE0, EXTPERIPH3, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(CLK3_REQ_PEE1, DEV3, NORMAL, TRISTATE, INPUT),
+
+ DEFAULT_PINMUX(CAM_MCLK_PCC0, VI_ALT3, UP, NORMAL, INPUT),
+
+ DEFAULT_PINMUX(PCC1, RSVD1, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(PBB0, RSVD1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(PBB3, VGP3, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(PBB4, VGP4, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(PBB5, VGP5, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(PBB6, VGP6, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(PBB7, I2S4, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(PCC2, I2S4, NORMAL, NORMAL, INPUT),
+
+ DEFAULT_PINMUX(JTAG_RTCK_PU7, RTCK, NORMAL, NORMAL, OUTPUT),
+
+ /* KBC keys */
+ DEFAULT_PINMUX(KB_ROW0_PR0, RSVD4, UP, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(KB_ROW1_PR1, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW2_PR2, KBC, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(KB_ROW3_PR3, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW4_PR4, KBC, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(KB_ROW5_PR5, KBC, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(KB_ROW6_PR6, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW7_PR7, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW8_PS0, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW9_PS1, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW10_PS2, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW11_PS3, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW12_PS4, KBC, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(KB_ROW13_PS5, KBC, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(KB_ROW14_PS6, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_ROW15_PS7, KBC, UP, NORMAL, INPUT),
+
+ DEFAULT_PINMUX(KB_COL0_PQ0, KBC, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(KB_COL1_PQ1, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_COL2_PQ2, RSVD4, UP, TRISTATE, INPUT),
+ DEFAULT_PINMUX(KB_COL3_PQ3, RSVD4, UP, TRISTATE, INPUT),
+ DEFAULT_PINMUX(KB_COL4_PQ4, RSVD4, UP, TRISTATE, INPUT),
+ DEFAULT_PINMUX(KB_COL5_PQ5, KBC, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(KB_COL6_PQ6, KBC, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(KB_COL7_PQ7, KBC, NORMAL, TRISTATE, INPUT),
+
+ /* CLK */
+ DEFAULT_PINMUX(CLK_32K_OUT_PA0, BLINK, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(SYS_CLK_REQ_PZ5, SYSCLK, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(OWR, OWR, NORMAL, NORMAL, INPUT),
+
+ /* DAP1 pinmux */
+ DEFAULT_PINMUX(DAP1_FS_PN0, I2S0, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(DAP1_DIN_PN1, I2S0, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(DAP1_DOUT_PN2, I2S0, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(DAP1_SCLK_PN3, I2S0, NORMAL, TRISTATE, INPUT),
+
+ /* CLK1 pinmux */
+ DEFAULT_PINMUX(CLK1_REQ_PEE2, DAP, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(CLK1_OUT_PW4, EXTPERIPH1, NORMAL, NORMAL, INPUT),
+
+ /* SPDIF pinmux */
+ DEFAULT_PINMUX(SPDIF_IN_PK6, SPDIF, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(SPDIF_OUT_PK5, SPDIF, NORMAL, TRISTATE, OUTPUT),
+
+ /* DAP2 pinmux */
+ DEFAULT_PINMUX(DAP2_FS_PA2, I2S1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP2_DIN_PA4, I2S1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP2_DOUT_PA5, I2S1, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(DAP2_SCLK_PA3, I2S1, NORMAL, NORMAL, INPUT),
+
+ /* SPI pinmux */
+ DEFAULT_PINMUX(SPI1_MOSI_PX4, SPI1, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(SPI1_SCK_PX5, SPI1, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(SPI1_CS0_N_PX6, SPI1, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(SPI1_MISO_PX7, SPI1, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(SPI2_SCK_PX2, GMI, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(SPI2_CS1_N_PW2, SPI2, UP, NORMAL, INPUT),
+
+ /* PEX pinmux */
+ DEFAULT_PINMUX(PEX_L0_PRSNT_N_PDD0, PCIE, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(PEX_L0_RST_N_PDD1, PCIE, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(PEX_L0_CLKREQ_N_PDD2, PCIE, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(PEX_WAKE_N_PDD3, PCIE, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(PEX_L1_PRSNT_N_PDD4, PCIE, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(PEX_L1_RST_N_PDD5, PCIE, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(PEX_L1_CLKREQ_N_PDD6, PCIE, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(PEX_L2_PRSNT_N_PDD7, PCIE, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(PEX_L2_RST_N_PCC6, PCIE, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(PEX_L2_CLKREQ_N_PCC7, PCIE, NORMAL, NORMAL, INPUT),
+
+ /* GMI pinmux */
+ DEFAULT_PINMUX(GMI_WP_N_PC7, RSVD1, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(GMI_IORDY_PI5, RSVD1, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_WAIT_PI7, RSVD1, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(GMI_ADV_N_PK0, NAND, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(GMI_CLK_PK1, NAND, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(GMI_CS2_N_PK3, RSVD1, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(GMI_CS3_N_PK4, RSVD1, NORMAL, TRISTATE, INPUT),
+ DEFAULT_PINMUX(GMI_CS7_N_PI6, NAND, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_AD0_PG0, NAND, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(GMI_AD1_PG1, NAND, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(GMI_AD2_PG2, NAND, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(GMI_AD3_PG3, NAND, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(GMI_AD4_PG4, NAND, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_AD5_PG5, NAND, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_AD6_PG6, NAND, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(GMI_AD7_PG7, NAND, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(GMI_AD8_PH0, PWM0, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GMI_AD9_PH1, PWM1, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GMI_AD10_PH2, NAND, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GMI_AD11_PH3, NAND, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GMI_AD12_PH4, NAND, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_AD13_PH5, NAND, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_AD14_PH6, NAND, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GMI_AD15_PH7, NAND, DOWN, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GMI_A16_PJ7, SPI4, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_A17_PB0, SPI4, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_A18_PB1, SPI4, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_A19_PK7, SPI4, NORMAL, NORMAL, INPUT),
+ DEFAULT_PINMUX(GMI_WR_N_PI0, NAND, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(GMI_OE_N_PI1, NAND, NORMAL, TRISTATE, OUTPUT),
+ DEFAULT_PINMUX(GMI_DQS_PI2, NAND, NORMAL, TRISTATE, OUTPUT),
+};
+
+static struct pmux_pingrp_config tf700t_mipi_pinmux[] = {
+ DEFAULT_PINMUX(LCD_PWR2_PC6, DISPLAYA, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(LCD_DC1_PD2, DISPLAYA, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(PBB3, VGP3, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(PBB7, I2S4, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(SPI2_MOSI_PX0, SPI2, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(KB_ROW7_PR7, KBC, NORMAL, NORMAL, OUTPUT),
+ DEFAULT_PINMUX(GMI_CS4_N_PK2, GMI, UP, NORMAL, INPUT),
+ DEFAULT_PINMUX(CAM_MCLK_PCC0, VI_ALT3, UP, TRISTATE, INPUT),
+};
+
+static struct pmux_drvgrp_config transformer_padctrl[] = {
+ /* (_drvgrp, _slwf, _slwr, _drvup, _drvdn, _lpmd, _schmt, _hsm) */
+ DEFAULT_PADCFG(SDIO1, SDIOCFG_DRVUP_SLWF, SDIOCFG_DRVDN_SLWR, \
+ SDIOCFG_DRVUP, SDIOCFG_DRVDN, NONE, DISABLE, DISABLE),
+};
+#endif /* _PINMUX_CONFIG_TRANSFORMER_H_ */
diff --git a/board/asus/transformer-t30/transformer-t30-spl.c b/board/asus/transformer-t30/transformer-t30-spl.c
new file mode 100644
index 0000000000..89819b2b92
--- /dev/null
+++ b/board/asus/transformer-t30/transformer-t30-spl.c
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * T30 Transformers SPL stage configuration
+ *
+ * (C) Copyright 2010-2013
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * (C) Copyright 2021
+ * Svyatoslav Ryhel <clamor95 at gmail.com>
+ */
+
+#include <common.h>
+#include <asm/arch-tegra/tegra_i2c.h>
+#include <linux/delay.h>
+
+#define TPS65911_I2C_ADDR (0x2D << 1)
+#define TPS65911_VDDCTRL_OP_REG 0x28
+#define TPS65911_VDDCTRL_SR_REG 0x27
+#define TPS65911_VDDCTRL_OP_DATA (0x2400 | TPS65911_VDDCTRL_OP_REG)
+#define TPS65911_VDDCTRL_SR_DATA (0x0100 | TPS65911_VDDCTRL_SR_REG)
+
+#define TPS62361B_I2C_ADDR (0x60 << 1)
+#define TPS62361B_SET3_REG 0x03
+#define TPS62361B_SET3_DATA (0x4600 | TPS62361B_SET3_REG)
+
+void pmic_enable_cpu_vdd(void)
+{
+ /* Set VDD_CORE to 1.200V. */
+ tegra_i2c_ll_write(TPS62361B_I2C_ADDR, TPS62361B_SET3_DATA);
+
+ udelay(1000);
+
+ /*
+ * Bring up CPU VDD via the TPS65911x PMIC on the DVC I2C bus.
+ * First set VDD to 1.0125V, then enable the VDD regulator.
+ */
+ tegra_i2c_ll_write(TPS65911_I2C_ADDR, TPS65911_VDDCTRL_OP_DATA);
+ udelay(1000);
+ tegra_i2c_ll_write(TPS65911_I2C_ADDR, TPS65911_VDDCTRL_SR_DATA);
+ udelay(10 * 1000);
+}
diff --git a/board/asus/transformer-t30/transformer-t30.c b/board/asus/transformer-t30/transformer-t30.c
new file mode 100644
index 0000000000..b6fd19d28e
--- /dev/null
+++ b/board/asus/transformer-t30/transformer-t30.c
@@ -0,0 +1,201 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2010-2013
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * (C) Copyright 2021
+ * Svyatoslav Ryhel <clamor95 at gmail.com>
+ */
+
+/* T30 Transformers derive from Cardhu board */
+
+#include <common.h>
+#include <dm.h>
+#include <env.h>
+#include <fdt_support.h>
+#include <i2c.h>
+#include <log.h>
+#include <asm/arch/pinmux.h>
+#include <asm/arch/gp_padctrl.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch-tegra/fuse.h>
+#include <asm/gpio.h>
+#include <linux/delay.h>
+#include "pinmux-config-transformer.h"
+
+#define TPS65911_I2C_ADDRESS 0x2D
+
+#define TPS65911_VDD1 0x21
+#define TPS65911_VDD1_OP 0x22
+#define TPS65911_LDO1 0x30
+#define TPS65911_LDO2 0x31
+#define TPS65911_LDO3 0x37
+#define TPS65911_LDO5 0x32
+#define TPS65911_LDO6 0x35
+
+#define TPS65911_GPIO0 0x60
+#define TPS65911_GPIO6 0x66
+#define TPS65911_GPIO7 0x67
+#define TPS65911_GPIO8 0x68
+
+#define TPS65911_DEVCTRL 0x3F
+#define DEVCTRL_PWR_OFF_MASK BIT(7)
+#define DEVCTRL_DEV_ON_MASK BIT(2)
+#define DEVCTRL_DEV_OFF_MASK BIT(0)
+
+#ifdef CONFIG_CMD_POWEROFF
+int do_poweroff(struct cmd_tbl *cmdtp, int flag,
+ int argc, char *const argv[])
+{
+ struct udevice *dev;
+ uchar data_buffer[1];
+ int ret;
+
+ ret = i2c_get_chip_for_busnum(0, TPS65911_I2C_ADDRESS, 1, &dev);
+ if (ret) {
+ log_debug("cannot find PMIC I2C chip\n");
+ return 0;
+ }
+
+ ret = dm_i2c_read(dev, TPS65911_DEVCTRL, data_buffer, 1);
+ if (ret)
+ return ret;
+
+ data_buffer[0] |= DEVCTRL_PWR_OFF_MASK;
+
+ ret = dm_i2c_write(dev, TPS65911_DEVCTRL, data_buffer, 1);
+ if (ret)
+ return ret;
+
+ data_buffer[0] |= DEVCTRL_DEV_OFF_MASK;
+ data_buffer[0] &= ~DEVCTRL_DEV_ON_MASK;
+
+ ret = dm_i2c_write(dev, TPS65911_DEVCTRL, data_buffer, 1);
+ if (ret)
+ return ret;
+
+ // wait some time and then print error
+ mdelay(5000);
+ printf("Failed to power off!!!\n");
+ return 1;
+}
+#endif
+
+/*
+ * Routine: pinmux_init
+ * Description: Do individual peripheral pinmux configs
+ */
+void pinmux_init(void)
+{
+ pinmux_config_pingrp_table(transformer_pinmux_common,
+ ARRAY_SIZE(transformer_pinmux_common));
+
+ pinmux_config_drvgrp_table(transformer_padctrl,
+ ARRAY_SIZE(transformer_padctrl));
+
+ if (of_machine_is_compatible("asus,tf700t")) {
+ pinmux_config_pingrp_table(tf700t_mipi_pinmux,
+ ARRAY_SIZE(tf700t_mipi_pinmux));
+ }
+}
+
+#ifdef CONFIG_MMC_SDHCI_TEGRA
+static void tps65911_voltage_init(void)
+{
+ struct udevice *dev;
+ int ret;
+
+ ret = i2c_get_chip_for_busnum(0, TPS65911_I2C_ADDRESS, 1, &dev);
+ if (ret) {
+ log_debug("cannot find PMIC I2C chip\n");
+ return;
+ }
+
+ /* TPS659110: LDO1_REG = 3.3v, ACTIVE to SDMMC4 */
+ ret = dm_i2c_reg_write(dev, TPS65911_LDO1, 0xc9);
+ if (ret)
+ log_debug("vcore_emmc set failed: %d\n", ret);
+
+ if (of_machine_is_compatible("asus,tf600t")) {
+ /* TPS659110: VDD1_REG = 1.2v, ACTIVE to backlight */
+ ret = dm_i2c_reg_write(dev, TPS65911_VDD1_OP, 0x33);
+ if (ret)
+ log_debug("vdd_bl set failed: %d\n", ret);
+
+ ret = dm_i2c_reg_write(dev, TPS65911_VDD1, 0x0d);
+ if (ret)
+ log_debug("vdd_bl enable failed: %d\n", ret);
+
+ /* TPS659110: LDO5_REG = 3.3v, ACTIVE to SDMMC1 VIO */
+ ret = dm_i2c_reg_write(dev, TPS65911_LDO5, 0x65);
+ if (ret)
+ log_debug("vdd_usd set failed: %d\n", ret);
+
+ /* TPS659110: LDO6_REG = 1.2v, ACTIVE to MIPI */
+ ret = dm_i2c_reg_write(dev, TPS65911_LDO6, 0x11);
+ if (ret)
+ log_debug("vdd_mipi set failed: %d\n", ret);
+ } else {
+ /* TPS659110: LDO2_REG = 3.1v, ACTIVE to SDMMC1 */
+ ret = dm_i2c_reg_write(dev, TPS65911_LDO2, 0xb9);
+ if (ret)
+ log_debug("vdd_usd set failed: %d\n", ret);
+
+ /* TPS659110: LDO3_REG = 3.1v, ACTIVE to SDMMC1 VIO */
+ ret = dm_i2c_reg_write(dev, TPS65911_LDO3, 0x5d);
+ if (ret)
+ log_debug("vddio_usd set failed: %d\n", ret);
+ }
+
+ /* TPS659110: GPIO0_REG output high to VDD_5V0_SBY */
+ ret = dm_i2c_reg_write(dev, TPS65911_GPIO0, 0x07);
+ if (ret)
+ log_debug("vdd_5v0_sby set failed: %d\n", ret);
+
+ /* TPS659110: GPIO6_REG output high to VDD_3V3_SYS */
+ ret = dm_i2c_reg_write(dev, TPS65911_GPIO6, 0x07);
+ if (ret)
+ log_debug("vdd_3v3_sys set failed: %d\n", ret);
+
+ /* TPS659110: GPIO7_REG output high to VDD_1V5_DDR */
+ ret = dm_i2c_reg_write(dev, TPS65911_GPIO7, 0x07);
+ if (ret)
+ log_debug("vdd_1v5_ddr set failed: %d\n", ret);
+
+ /* TPS659110: GPIO8_REG pull_down output high to VDD_5V0_SYS */
+ ret = dm_i2c_reg_write(dev, TPS65911_GPIO8, 0x0f);
+ if (ret)
+ log_debug("vdd_5v0_sys set failed: %d\n", ret);
+}
+
+/*
+ * Routine: pin_mux_mmc
+ * Description: setup the MMC muxes, power rails, etc.
+ */
+void pin_mux_mmc(void)
+{
+ /* Bring up uSD and eMMC power */
+ tps65911_voltage_init();
+}
+#endif /* MMC */
+
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
+int ft_board_setup(void *blob, struct bd_info *bd)
+{
+ /* Remove TrustZone nodes */
+ fdt_del_node_and_alias(blob, "/firmware");
+ fdt_del_node_and_alias(blob, "/reserved-memory/trustzone at bfe00000");
+
+ return 0;
+}
+#endif
+
+void nvidia_board_late_init(void)
+{
+ char serialno_str[17];
+
+ /* Set chip id as serialno */
+ sprintf(serialno_str, "%016llx", tegra_chip_uid());
+ env_set("serial#", serialno_str);
+ env_set("platform", "Tegra 3 T30");
+}
diff --git a/configs/p1801-t.config b/configs/p1801-t.config
new file mode 100644
index 0000000000..fab2912132
--- /dev/null
+++ b/configs/p1801-t.config
@@ -0,0 +1,2 @@
+CONFIG_DEFAULT_DEVICE_TREE="tegra30-asus-p1801-t"
+CONFIG_USB_GADGET_PRODUCT_NUM=0x4cb0
diff --git a/configs/tf201.config b/configs/tf201.config
new file mode 100644
index 0000000000..296743b774
--- /dev/null
+++ b/configs/tf201.config
@@ -0,0 +1,2 @@
+CONFIG_DEFAULT_DEVICE_TREE="tegra30-asus-tf201"
+CONFIG_USB_GADGET_PRODUCT_NUM=0x4d00
diff --git a/configs/tf300t.config b/configs/tf300t.config
new file mode 100644
index 0000000000..32a92fe76f
--- /dev/null
+++ b/configs/tf300t.config
@@ -0,0 +1,2 @@
+CONFIG_DEFAULT_DEVICE_TREE="tegra30-asus-tf300t"
+CONFIG_USB_GADGET_PRODUCT_NUM=0x4d00
diff --git a/configs/tf300tg.config b/configs/tf300tg.config
new file mode 100644
index 0000000000..1396294f6d
--- /dev/null
+++ b/configs/tf300tg.config
@@ -0,0 +1,2 @@
+CONFIG_DEFAULT_DEVICE_TREE="tegra30-asus-tf300tg"
+CONFIG_USB_GADGET_PRODUCT_NUM=0x4c80
diff --git a/configs/tf300tl.config b/configs/tf300tl.config
new file mode 100644
index 0000000000..3db033c8df
--- /dev/null
+++ b/configs/tf300tl.config
@@ -0,0 +1,2 @@
+CONFIG_DEFAULT_DEVICE_TREE="tegra30-asus-tf300tl"
+CONFIG_USB_GADGET_PRODUCT_NUM=0x4d00
diff --git a/configs/tf600t.config b/configs/tf600t.config
new file mode 100644
index 0000000000..89d8db4eb1
--- /dev/null
+++ b/configs/tf600t.config
@@ -0,0 +1,4 @@
+CONFIG_DEFAULT_DEVICE_TREE="tegra30-asus-tf600t"
+CONFIG_TRANSFORMER_SPI_BOOT=y
+CONFIG_BOOTCOMMAND="setenv gpio_button 222; if run check_button; then poweroff; fi; setenv gpio_button 132; if run check_button; then echo Starting SPI flash update ...; run update_spi; fi; run bootcmd_mmc1; run bootcmd_mmc0; poweroff;"
+CONFIG_USB_GADGET_PRODUCT_NUM=0x4d00
diff --git a/configs/tf700t.config b/configs/tf700t.config
new file mode 100644
index 0000000000..066c884d08
--- /dev/null
+++ b/configs/tf700t.config
@@ -0,0 +1,2 @@
+CONFIG_DEFAULT_DEVICE_TREE="tegra30-asus-tf700t"
+CONFIG_USB_GADGET_PRODUCT_NUM=0x4c90
diff --git a/configs/transformer_t30_defconfig b/configs/transformer_t30_defconfig
new file mode 100644
index 0000000000..6fe6f2548d
--- /dev/null
+++ b/configs/transformer_t30_defconfig
@@ -0,0 +1,85 @@
+CONFIG_ARM=y
+CONFIG_SYS_L2CACHE_OFF=y
+CONFIG_ARCH_TEGRA=y
+CONFIG_SUPPORT_PASSING_ATAGS=y
+CONFIG_CMDLINE_TAG=y
+CONFIG_INITRD_TAG=y
+CONFIG_TEXT_BASE=0x80110000
+CONFIG_NR_DRAM_BANKS=2
+CONFIG_ENV_SIZE=0x3000
+CONFIG_ENV_OFFSET=0xFFFFD000
+CONFIG_DEFAULT_DEVICE_TREE="tegra30-asus-tf201"
+CONFIG_SPL_TEXT_BASE=0x80108000
+CONFIG_SYS_PROMPT="Tegra30 (Transformer) # "
+CONFIG_SPL_STACK=0x800ffffc
+CONFIG_TEGRA30=y
+CONFIG_TARGET_TRANSFORMER_T30=y
+CONFIG_CMD_EBTUPDATE=y
+CONFIG_SYS_LOAD_ADDR=0x82000000
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_SYSTEM_SETUP=y
+CONFIG_BOOTDELAY=0
+CONFIG_AUTOBOOT_KEYED=y
+CONFIG_AUTOBOOT_KEYED_CTRLC=y
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="setenv gpio_button 150; if run check_button; then poweroff; fi; setenv gpio_button 131; if run check_button; then bootmenu; fi; run bootcmd_mmc1; run bootcmd_mmc0; poweroff;"
+CONFIG_SPL_FOOTPRINT_LIMIT=y
+CONFIG_SPL_MAX_FOOTPRINT=0x8000
+# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SYS_SPL_MALLOC=y
+CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y
+CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x80090000
+CONFIG_SYS_SPL_MALLOC_SIZE=0x10000
+CONFIG_SYS_MAXARGS=64
+CONFIG_SYS_PBSIZE=2084
+CONFIG_CMD_BOOTMENU=y
+# CONFIG_CMD_IMI is not set
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_GPT_RENAME=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_POWEROFF=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+CONFIG_CMD_UMS_ABORT_KEYED=y
+# CONFIG_CMD_SETEXPR is not set
+# CONFIG_CMD_NFS is not set
+CONFIG_CMD_PAUSE=y
+CONFIG_CMD_EXT4_WRITE=y
+# CONFIG_SPL_DOS_PARTITION is not set
+# CONFIG_SPL_EFI_PARTITION is not set
+CONFIG_ENV_OVERWRITE=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_SYS_MMC_ENV_PART=2
+CONFIG_SPL_DM=y
+CONFIG_BUTTON=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
+CONFIG_FASTBOOT_BUF_ADDR=0x91000000
+CONFIG_FASTBOOT_BUF_SIZE=0x10000000
+CONFIG_FASTBOOT_FLASH=y
+CONFIG_FASTBOOT_FLASH_MMC_DEV=0
+CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
+CONFIG_GPIO_HOG=y
+CONFIG_SYS_I2C_TEGRA=y
+CONFIG_I2C_MUX=y
+CONFIG_I2C_MUX_GPIO=y
+CONFIG_BUTTON_KEYBOARD=y
+CONFIG_DM_PMIC=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_PWM_TEGRA=y
+CONFIG_SYS_NS16550=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_TEGRA=y
+CONFIG_USB_KEYBOARD=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="ASUS"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0b05
+CONFIG_CI_UDC=y
+CONFIG_VIDEO=y
+# CONFIG_VIDEO_LOGO is not set
+CONFIG_VIDEO_TEGRA20=y
+# CONFIG_CMD_BOOTEFI_BOOTMGR is not set
diff --git a/doc/board/asus/index.rst b/doc/board/asus/index.rst
new file mode 100644
index 0000000000..c59571c8b3
--- /dev/null
+++ b/doc/board/asus/index.rst
@@ -0,0 +1,9 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+ASUS
+====
+
+.. toctree::
+ :maxdepth: 2
+
+ transformer_t30
diff --git a/doc/board/asus/transformer_t30.rst b/doc/board/asus/transformer_t30.rst
new file mode 100644
index 0000000000..b6b6101540
--- /dev/null
+++ b/doc/board/asus/transformer_t30.rst
@@ -0,0 +1,116 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+U-Boot for the ASUS Transformer device family
+=============================================
+
+``DISCLAMER!`` Moving your ASUS Transformer to use U-Boot
+assumes replacement of the vendor ASUS bootloader. Vendor
+android firmwares will no longer be able to run on the device.
+This replacement IS reversible.
+
+Quick Start
+-----------
+
+- Build U-Boot
+- Pack U-Boot into repart-block
+- Flash repart-block into the eMMC
+- Flash repart-block into TF600T SPI flash
+- Boot
+- Self Upgrading
+
+Build U-Boot
+------------
+
+Device support is implemented by applying config fragment
+to a generic board defconfig. Valid fragments are ``tf201.config``,
+``tf300t.config``, ``tf300tg.config``, ``tf300tl.config``,
+``tf700t.config``, ``tf600t.config`` and ``p1801-t.config``.
+
+.. code-block:: bash
+
+ $ export CROSS_COMPILE=arm-linux-gnueabi-
+ $ make transformer_t30_defconfig tf201.config # For TF201
+ $ make
+
+After the build succeeds, you will obtain the final ``u-boot-dtb-tegra.bin``
+image, ready for flashing (but check the next section for additional
+adjustments).
+
+Pack U-Boot into repar-block
+----------------------------
+
+``DISCLAMER!`` All questions related to re-crypt work should be asked
+in re-crypt repo issues. NOT HERE!
+
+re-crypt is a small script which packs ``u-boot-dtb-tegra.bin`` in
+form usable by device. This process is required only on the first
+installation or to recover the device in case of a failed update.
+You need to know your tablet's individual SBK to continue.
+
+.. code-block:: bash
+
+ $ git clone https://github.com/clamor-s/re-crypt.git
+ $ cd re-crypt # place your u-boot-dtb-regra.bin here
+ $ ./re-crypt.sh -d tf201 -k deadbeefdeadc0dedeadd00dfee1dead
+
+Script will produce you a `repart-block.bin` ready to flash.
+
+Flash repart-block into the eMMC
+--------------------------------
+
+``DISCLAMER!`` All questions related to NvFlash should be asked
+in the proper place. NOT HERE! Flashing repart-block will erase
+all your eMMC, so make a backup before!
+
+``repart-block.bin`` contains BCT and bootloader in encrypted state
+in form which can just be written RAW at the start of eMMC.
+
+.. code-block:: bash
+
+ $ wheelie --blob blob.bin
+ $ nvflash --resume --rawdevicewrite 0 1024 repart-block.bin
+
+Flash repart-block into TF600T SPI flash
+----------------------------------------
+
+Unlike other transformers TF600T uses separate 4 MB SPI flash which
+contains all data required for boot. It is flashed from within u-boot
+itself preloaded into RAM using fusee gelee. After creating your
+``repart-block.bin`` you have to place it on a 1st partition of microSD
+card formated in fat. Then insert this microSD card into your tablet
+and boot it using fusee gelee and u-boot which was included into
+repart-block.bin, while booting you must hold volume down button.
+Process should take less then a minute, if everything goes correct,
+on microSD will appear ``spi-flash-backup.bin`` file, which is dump of
+your spi flash content and can be used to restore UEFI, do not loose it,
+tablet will power itself off.
+
+Self-updating of u-boot is performed by placing ``u-boot-dtb-tegra.bin``
+on 1st partition of microSD, inserting it into tablet and booting with
+pressed volume down button.
+
+Boot
+----
+
+After flashing ``repart-block.bin`` the device should reboot and turn
+itself off. This is normal behavior if no boot configuration is
+found.
+
+To boot Linux, U-Boot will look for an ``extlinux.conf`` on MicroSD
+and then on eMMC. Additionally if Volume Down button is pressed
+while booting device will enter bootmenu. Bootmenu contains entries
+to mount MicroSD and eMMC as mass storage, fastboot, reboot, reboot
+RCM, poweroff, enter U-Boot console and update bootloader (check next
+chapter).
+
+Flashing ``repart-block.bin`` eliminates vendor restriction on eMMC
+and allows the user to use/partition it in any way the user desires.
+
+Self Upgrading
+--------------
+
+Place your ``u-boot-dtb-tegra.bin`` on the first partition of the
+MicroSD card and insert it into the tablet. Enter bootmenu, choose
+update bootloader option with Power button and U-Boot should update
+itself. Once the process is completed, U-Boot will ask to press any
+button to reboot.
diff --git a/doc/board/index.rst b/doc/board/index.rst
index 9ef25b1091..d28d8e1874 100644
--- a/doc/board/index.rst
+++ b/doc/board/index.rst
@@ -14,6 +14,7 @@ Board-specific doc
anbernic/index
apple/index
armltd/index
+ asus/index
atmel/index
beacon/index
broadcom/index
diff --git a/include/configs/transformer-common.h b/include/configs/transformer-common.h
new file mode 100644
index 0000000000..dcdda1ec5b
--- /dev/null
+++ b/include/configs/transformer-common.h
@@ -0,0 +1,94 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2022, Svyatoslav Ryhel <clamor95 at gmail.com>.
+ */
+
+#ifndef __TRANSFORMER_COMMON_H
+#define __TRANSFORMER_COMMON_H
+
+/* High-level configuration options */
+#define CFG_TEGRA_BOARD_STRING "ASUS Transformer"
+
+#define TRANSFORMER_FLASH_UBOOT \
+ "flash_uboot=echo Preparing RAM;" \
+ "mw ${kernel_addr_r} 0 ${boot_block_size_r};" \
+ "mw ${ramdisk_addr_r} 0 ${boot_block_size_r};" \
+ "echo Reading BCT;" \
+ "mmc dev 0 1;" \
+ "mmc read ${kernel_addr_r} 0 ${boot_block_size};" \
+ "echo Reading bootloader;" \
+ "if load mmc 1:1 ${ramdisk_addr_r} ${bootloader_file};" \
+ "then echo Calculating bootloader size;" \
+ "size mmc 1:1 ${bootloader_file};" \
+ "ebtupdate ${kernel_addr_r} ${ramdisk_addr_r} ${filesize};" \
+ "echo Writing bootloader to eMMC;" \
+ "mmc dev 0 1;" \
+ "mmc write ${kernel_addr_r} 0 ${boot_block_size};" \
+ "mmc dev 0 2;" \
+ "mmc write ${ramdisk_addr_r} 0 ${boot_block_size};" \
+ "echo Bootloader written successfully;" \
+ "pause 'Press ANY key to reboot device...'; reset;" \
+ "else echo Reading bootloader failed;" \
+ "pause 'Press ANY key to return to bootmenu...'; bootmenu; fi\0"
+
+#define TRANSFORMER_FLASH_SPI \
+ "update_spi=sf probe 0:1;" \
+ "echo Dumping current SPI flash content ...;" \
+ "sf read ${kernel_addr_r} 0x0 ${spi_size};" \
+ "if fatwrite mmc 1:1 ${kernel_addr_r} spi-flash-backup.bin ${spi_size};" \
+ "then echo SPI flash content was successfully written into spi-flash-backup.bin;" \
+ "echo Reading SPI flash binary;" \
+ "if load mmc 1:1 ${kernel_addr_r} repart-block.bin;" \
+ "then echo Writing bootloader into SPI flash;" \
+ "sf probe 0:1;" \
+ "sf update ${kernel_addr_r} 0x0 ${spi_size};" \
+ "poweroff;" \
+ "else echo Preparing RAM;" \
+ "mw ${kernel_addr_r} 0 ${boot_block_size_r};" \
+ "mw ${ramdisk_addr_r} 0 ${boot_block_size_r};" \
+ "echo Reading BCT;" \
+ "sf read ${kernel_addr_r} 0x0 ${boot_block_size_r};" \
+ "echo Reading bootloader;" \
+ "if load mmc 1:1 ${ramdisk_addr_r} ${bootloader_file};" \
+ "then echo Calculating bootloader size;" \
+ "size mmc 1:1 ${bootloader_file};" \
+ "ebtupdate ${kernel_addr_r} ${ramdisk_addr_r} ${filesize};" \
+ "echo Writing bootloader into SPI flash;" \
+ "sf probe 0:1;" \
+ "sf update ${kernel_addr_r} 0x0 ${boot_block_size_r};" \
+ "sf update ${ramdisk_addr_r} ${boot_block_size_r} ${boot_block_size_r};" \
+ "echo Bootloader written successfully; poweroff;" \
+ "else echo Reading bootloader failed;" \
+ "poweroff; fi;" \
+ "fi;" \
+ "else echo SPI flash backup FAILED! Aborting ...;" \
+ "poweroff; fi\0"
+
+#define TRANSFORMER_REFRESH_USB \
+ "refresh_usb=usb start; usb reset; usb tree; usb info;" \
+ "pause 'Press ANY key to return to bootmenu...'; bootmenu\0"
+
+#define TRANSFORMER_BOOTMENU \
+ TRANSFORMER_FLASH_UBOOT \
+ TRANSFORMER_FLASH_SPI \
+ TRANSFORMER_REFRESH_USB \
+ "bootmenu_0=mount internal storage=usb start && ums 0 mmc 0; bootmenu\0" \
+ "bootmenu_1=mount external storage=usb start && ums 0 mmc 1; bootmenu\0" \
+ "bootmenu_2=fastboot=echo Starting Fastboot protocol ...; fastboot usb 0; bootmenu\0" \
+ "bootmenu_3=update bootloader=run flash_uboot\0" \
+ "bootmenu_4=refresh USB=run refresh_usb\0" \
+ "bootmenu_5=reboot RCM=enterrcm\0" \
+ "bootmenu_6=reboot=reset\0" \
+ "bootmenu_7=power off=poweroff\0" \
+ "bootmenu_delay=-1\0"
+
+#define BOARD_EXTRA_ENV_SETTINGS \
+ "spi_size=0x400000\0" \
+ "boot_block_size_r=0x200000\0" \
+ "boot_block_size=0x1000\0" \
+ "check_button=gpio input ${gpio_button}; test $? -eq 0;\0" \
+ "bootloader_file=u-boot-dtb-tegra.bin\0" \
+ "partitions=name=emmc,start=0,size=-,uuid=${uuid_gpt_rootfs}\0" \
+ TRANSFORMER_BOOTMENU
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/transformer-t30.h b/include/configs/transformer-t30.h
new file mode 100644
index 0000000000..d2a16f12c1
--- /dev/null
+++ b/include/configs/transformer-t30.h
@@ -0,0 +1,23 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * (C) Copyright 2010,2012
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * (C) Copyright 2022
+ * Svyatoslav Ryhel <clamor95 at gmail.com>
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <linux/sizes.h>
+
+#include "tegra30-common.h"
+#include "transformer-common.h"
+
+/* Board-specific serial config */
+#define CFG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE
+
+#include "tegra-common-post.h"
+
+#endif /* __CONFIG_H */
--
2.39.2
More information about the U-Boot
mailing list