[PATCH RFC u-boot-mvebu 00/59] arm: mvebu: Various fixes
Stefan Roese
sr at denx.de
Wed Mar 1 07:01:14 CET 2023
Hi Pali,
On 2/28/23 23:41, Pali Rohár wrote:
<snip>
>>>> So my question is, why are less patches in your github branch? Or did
>>>> you try to re-send with this smaller amount of patches and this did not
>>>> work because of the crashing mail server?
>>>
>>> I cannot understand how it is possible. There should be 59 patches. I
>>> have not created / sent more patches. If there is missing some patch on
>>> Github I can double check it...
>>
>> Most likely I have fat-fingered myself something here. Please forget
>> about this. My fault.
>
> Ok. So do you have all patches in the correct form?
Yes. All fine.
Thanks,
Stefan
>> Thanks,
>> Stefan
>>
>>>
>>>> Thanks,
>>>> Stefan
>>>>
>>>>>
>>>>>> Thanks,
>>>>>> Stefan
>>>>>>
>>>>>>>
>>>>>>> > Thanks,
>>>>>>> > Stefan
>>>>>>> >
>>>>>>> > >
>>>>>>> > > >
>>>>>>> > > > Pali Rohár (59):
>>>>>>> > > > tools: kwbimage: Fix generating, verifying and extracting SDIO
>>>>>>> > > > kwbimage
>>>>>>> > > > tools: kwboot: Fix parsing SDIO kwbimage
>>>>>>> > > > arm: mvebu: spl: Fix parsing SDIO kwbimage
>>>>>>> > > > cmd: mvebu/bubt: Fix parsing SDIO kwbimage
>>>>>>> > > > tools: kwbimage: Fix generating, verifying and extracting SATA
>>>>>>> > > > kwbimage
>>>>>>> > > > tools: kwboot: Fix parsing SATA kwbimage
>>>>>>> > > > arm: mvebu: spl: Fix parsing SATA kwbimage
>>>>>>> > > > cmd: mvebu/bubt: Fix parsing SATA kwbimage
>>>>>>> > > > arm: mvebu: spl: Remove checks for BOOT_DEVICE_MMC2 and
>>>>>>> > > > BOOT_DEVICE_MMC2_2
>>>>>>> > > > arm: mvebu: spl: Load proper U-Boot from selected eMMC
>>>>>>> boot partition
>>>>>>> > > > spl: mmc: Allow to disable SYS_MMCSD_FS_BOOT_PARTITION
>>>>>>> > > > arm: mvebu: spl: Fix support for loading U-Boot proper
>>>>>>> from SD card
>>>>>>> > > > tools: kwboot: Add more documentation references
>>>>>>> > > > tools: kwboot: Add image type documentation
>>>>>>> > > > tools: kwboot: Fix parsing UART image without data checksum
>>>>>>> > > > tools: kwboot: Validate optional kwbimage v1 headers
>>>>>>> > > > tools: kwboot: Add check that kwbimage contains DDR init code
>>>>>>> > > > tools: kwboot: Fix patching of SPI/NOR XIP images
>>>>>>> > > > tools: kwboot: Show image type and error parsing reasons
>>>>>>> > > > cmd: mvebu/bubt: Add support for selecting eMMC HW partition
>>>>>>> > > > cmd: mvebu/bubt: Add support for writing image to SATA disk
>>>>>>> > > > cmd: mvebu/bubt: Add support for reading image from the
>>>>>>> SATA disk
>>>>>>> > > > partition
>>>>>>> > > > cmd: mvebu/bubt: Rename variable image_size to hdr_size
>>>>>>> > > > cmd: mvebu/bubt: Mark all local symbols as static
>>>>>>> > > > cmd: mvebu/bubt: Do not modify image in A8K
>>>>>>> check_image_header()
>>>>>>> > > > cmd: mvebu/bubt: Check also A8K boot image checksum
>>>>>>> > > > cmd: mvebu/bubt: Set correct default image name for 32-bit
>>>>>>> Armada SoCs
>>>>>>> > > > cmd: mvebu/bubt: Better guess default MVEBU_*_BOOT option
>>>>>>> > > > cmd: mvebu/bubt: Fix warnings: unused variable
>>>>>>> 'secure_mode' and
>>>>>>> > > > 'fuse_read_u64' defined but not used
>>>>>>> > > > cmd: mvebu/bubt: Enable command by default
>>>>>>> > > > tools: kwbimage: Fix dumping register set / DATA commands
>>>>>>> > > > tools: kwbimage: Fix endianity when dumping NAND_PAGE_SIZE
>>>>>>> > > > tools: kwbimage: Fix dumping NAND_BADBLK_LOCATION
>>>>>>> > > > tools: kwbimage: Fix dumping NAND_BLKSZ
>>>>>>> > > > tools: kwbimage: Fix generating of kwbimage v0 header checksum
>>>>>>> > > > tools: kwbimage: Fix endianity when printing kwbimage header
>>>>>>> > > > tools: kwbimage: Reject mkimage -F option
>>>>>>> > > > tools: kwbimage: Add support for dumping NAND_BLKSZ for v0
>>>>>>> images
>>>>>>> > > > tools: kwbimage: Print binary image offset as size
>>>>>>> > > > tools: kwbimage: Print image data offset when printing
>>>>>>> kwbimage header
>>>>>>> > > > tools: kwbimage: Simplify add_secure_header_v1()
>>>>>>> > > > tools: kwbimage: Rename imagesz to dataoff
>>>>>>> > > > tools: kwbimage: Fix generating secure boot data image
>>>>>>> signature
>>>>>>> > > > tools: kwbimage: Fix invalid secure boot header signature
>>>>>>> > > > tools: mkimage: Do not fill legacy_img_hdr for non-legacy
>>>>>>> XIP images
>>>>>>> > > > tools: kwbimage: Add support for XIP SPI/NOR images
>>>>>>> > > > tools: mkimage: Print human readable error when -d is not
>>>>>>> specified
>>>>>>> > > > tools: mkimage: Do not try to open datafile when it is skipped
>>>>>>> > > > tools: kwbimage: Add support for creating an image with no
>>>>>>> data
>>>>>>> > > > arm: mvebu: Add support for generating NAND kwbimage
>>>>>>> > > > arm: mvebu: Add support for generating PEX kwbimage
>>>>>>> > > > arm: mvebu: Fix description of
>>>>>>> MVEBU_SPL_BOOT_DEVICE_(SPI|MMC) options
>>>>>>> > > > arm: mvebu: db-88f6820-amc: Add defconfig for NAND booting
>>>>>>> > > > arm: mvebu: clearfog: Add defconfig for SATA booting
>>>>>>> > > > arm: mvebu: Remove A39x relicts
>>>>>>> > > > arm: mvebu: Fix comment about CPU_ATTR_BOOTROM mapping
>>>>>>> > > > arm: mvebu: Define env_sf_get_env_addr() also for Proper
>>>>>>> U-Boot
>>>>>>> > > > arm: mvebu: Define SPL memory maps
>>>>>>> > > > doc/kwboot.1: Update example description
>>>>>>> > > >
>>>>>>> > > > arch/arm/mach-mvebu/Kconfig | 23 +-
>>>>>>> > > > arch/arm/mach-mvebu/Makefile | 13 +
>>>>>>> > > > arch/arm/mach-mvebu/cpu.c | 11 +-
>>>>>>> > > > arch/arm/mach-mvebu/include/mach/cpu.h | 21 ++
>>>>>>> > > > arch/arm/mach-mvebu/kwbimage.cfg.in
>>>>>>> <http://kwbimage.cfg.in> | 5 +
>>>>>>> > > > .../serdes/a38x/high_speed_env_spec.c | 4 +-
>>>>>>> > > > .../serdes/a38x/high_speed_env_spec.h | 4 +-
>>>>>>> > > > arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.c | 14 +-
>>>>>>> > > > arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.h | 30 --
>>>>>>> > > > arch/arm/mach-mvebu/spl.c | 84 +++--
>>>>>>> > > > cmd/mvebu/Kconfig | 18 ++
>>>>>>> > > > cmd/mvebu/bubt.c | 253
>>>>>>> ++++++++++++---
>>>>>>> > > > common/spl/Kconfig | 9 +
>>>>>>> > > > common/spl/spl_mmc.c | 12 +-
>>>>>>> > > > ...rfog_defconfig => clearfog_sata_defconfig} | 2 +-
>>>>>>> > > > ...efconfig => db-88f6820-amc_nand_defconfig} | 6 +-
>>>>>>> > > > doc/kwboot.1 | 3 +-
>>>>>>> > > > doc/mvebu/cmd/bubt.txt | 25 +-
>>>>>>> > > > drivers/mtd/nand/raw/Kconfig | 4 +-
>>>>>>> > > > tools/kwbimage.c | 297
>>>>>>> +++++++++++-------
>>>>>>> > > > tools/kwboot.c | 200
>>>>>>> +++++++++++-
>>>>>>> > > > tools/mkimage.c | 11 +-
>>>>>>> > > > 22 files changed, 768 insertions(+), 281 deletions(-)
>>>>>>> > > > copy configs/{clearfog_defconfig =>
>>>>>>> clearfog_sata_defconfig} (98%)
>>>>>>> > > > copy configs/{db-88f6820-amc_defconfig =>
>>>>>>> db-88f6820-amc_nand_defconfig} (92%)
>>>>>>> > > >
>>>>>>> > > > --
>>>>>>> > > > 2.20.1
>>>>>>> > > >
>>>>>>> >
>>>>>>> > Viele Grüße,
>>>>>>> > Stefan Roese
>>>>>>> >
>>>>>>> > --
>>>>>>> > DENX Software Engineering GmbH, Managing Director: Erika Unter
>>>>>>> > HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
>>>>>>> > Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email:
>>>>>>> sr at denx.de <mailto:sr at denx.de>
>>>>>>>
>>>>>>
>>>>>> Viele Grüße,
>>>>>> Stefan Roese
>>>>>>
>>>>>> --
>>>>>> DENX Software Engineering GmbH, Managing Director: Erika Unter
>>>>>> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
>>>>>> Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de
>>>>
>>>> Viele Grüße,
>>>> Stefan Roese
>>>>
>>>> --
>>>> DENX Software Engineering GmbH, Managing Director: Erika Unter
>>>> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
>>>> Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de
>>
>> Viele Grüße,
>> Stefan Roese
>>
>> --
>> DENX Software Engineering GmbH, Managing Director: Erika Unter
>> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
>> Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de
Viele Grüße,
Stefan Roese
--
DENX Software Engineering GmbH, Managing Director: Erika Unter
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de
More information about the U-Boot
mailing list