[PATCH V7 13/15] iot2050: Refresh defconfigs and activate CONFIG_EFI_SCROLL_ON_CLEAR_SCREEN

[Andrew Davis]

On 2/28/23 12:19 PM, Jan Kiszka wrote:
> From: Jan Kiszka <jan.kiszka at siemens.com>
> 
> This feature is desired on the platform.
> 

As you can see here your split defconfigs are already out of sync
and need special maintenance :)

Andrew

> Signed-off-by: Jan Kiszka <jan.kiszka at siemens.com>
> ---
>   configs/iot2050_pg1_defconfig | 1 +
>   configs/iot2050_pg2_defconfig | 5 +----
>   2 files changed, 2 insertions(+), 4 deletions(-)
> 
> diff --git a/configs/iot2050_pg1_defconfig b/configs/iot2050_pg1_defconfig
> index 258ad4c87e5..45c88fc134e 100644
> --- a/configs/iot2050_pg1_defconfig
> +++ b/configs/iot2050_pg1_defconfig
> @@ -146,3 +146,4 @@ CONFIG_WDT=y
>   CONFIG_WDT_K3_RTI=y
>   CONFIG_WDT_K3_RTI_LOAD_FW=y
>   CONFIG_OF_LIBFDT_OVERLAY=y
> +CONFIG_EFI_SCROLL_ON_CLEAR_SCREEN=y
> diff --git a/configs/iot2050_pg2_defconfig b/configs/iot2050_pg2_defconfig
> index 2ff360b0623..d2bdeab593b 100644
> --- a/configs/iot2050_pg2_defconfig
> +++ b/configs/iot2050_pg2_defconfig
> @@ -25,11 +25,8 @@ CONFIG_ENV_OFFSET_REDUND=0x6a0000
>   CONFIG_SPL_SPI_FLASH_SUPPORT=y
>   CONFIG_SPL_SPI=y
>   CONFIG_DISTRO_DEFAULTS=y
> -CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
> -CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80100000
>   # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
>   CONFIG_SPL_LOAD_FIT=y
> -# CONFIG_USE_SPL_FIT_GENERATOR is not set
>   CONFIG_OF_BOARD_SETUP=y
>   CONFIG_BOOTSTAGE=y
>   CONFIG_SHOW_BOOT_PROGRESS=y
> @@ -78,7 +75,6 @@ CONFIG_SPL_OF_LIST="k3-am65-iot2050-spl"
>   CONFIG_SPL_MULTI_DTB_FIT_NO_COMPRESSION=y
>   CONFIG_ENV_IS_IN_SPI_FLASH=y
>   CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
> -CONFIG_DM=y
>   CONFIG_SPL_DM=y
>   CONFIG_SPL_DM_SEQ_ALIAS=y
>   CONFIG_SPL_REGMAP=y
> @@ -150,3 +146,4 @@ CONFIG_WDT=y
>   CONFIG_WDT_K3_RTI=y
>   CONFIG_WDT_K3_RTI_LOAD_FW=y
>   CONFIG_OF_LIBFDT_OVERLAY=y
> +CONFIG_EFI_SCROLL_ON_CLEAR_SCREEN=y