u-boot crashes if mass-storage devices are connected via USB-C

[Janne Grunau]

On 2023-03-02 18:33:15 +0100, Marek Vasut wrote:
> On 3/2/23 10:14, Janne Grunau wrote:
> > On 2023-03-01 23:51:14 +0100, Marek Vasut wrote:
> > > On 3/1/23 21:34, Simon Glass wrote:
> > > > +Marek Vasut +Bin Meng +Mark Kettenis +Tom Rini
> > > > 
> > > > On Wed, 1 Mar 2023 at 08:12, bluetail <a-development+asahi at posteo.de> wrote:
> > > > > 
> > > > > Essentially, I connect a mass-storage device to the USB-C port of a Mac
> > > > > Mini 2020 (M1), and it leads to the issue in the attachment.
> > > > > I was able to reproduce it with Icy Box IB-3810 and ICY BOX IB-3805.
> > > > > Initially I thought this issue was only for some devices (also attached
> > > > > here) https://github.com/AsahiLinux/u-boot/issues/4 but it appears this
> > > > > might be a issue that is with many devices.
> > > > > 
> > > > > If you need any more information, please feel free to ask. I am very
> > > > > eager to have this issue fixed because it seems to be a very broad issue
> > > > > with mass media storage in general.
> > > > > uname-r returns 6.1.0-asahi-2-2-edge-ARCH
> > > Would it be possible to check whether current u-boot/master works any better
> > 
> > Reproduced with b0eda49bc9b0 ("Merge tag 'u-boot-at91-fixes-2023.04-a'
> > of https://source.denx.de/u-boot/custodians/u-boot-at91") and Icy Box
> > IB-3804-C31 (same design as IB-3805/IB-3810 but just a single 4 port
> > USB3 hub + 4 independent asmedia usb3 to sata converters).
> > 
> > | scanning bus usb at b02280000 for devices... Device NOT ready
> > |    Request Sense returned 02 3A 00
> > | Device NOT ready
> > |    Request Sense returned 02 3A 00
> > | Resetting EP 0...
> > | WARN halted endpoint, queueing URB anyway.
> > | Unexpected XHCI event TRB, skipping... (c9208350 0000010f 13000000 04008401)
> > | "Synchronous Abort" handler, esr 0x96000005
> > | elr: 000000000003934c lr : 000000000003934c (reloc)
> > | elr: 0000010fcd24034c lr : 0000010fcd24034c
> 
> Could you decode the trace and check where exactly this exception occurred ?
> 
> It should be enough to run "aarch64-...-objdump -lSD u-boot | less" on the
> U-Boot which matches the one which generated the trace, and then look up the
> lr/elr address in that trace. That should point you to the exact place in
> code where the exception occurred .

Slightly different binary due to unrelated chnages:

| scanning bus usb at 702280000 for devices... 1 USB Device(s) found
| scanning bus usb at b02280000 for devices... 1 USB Device(s) found
| scanning bus usb at f02280000 for devices... 1 USB Device(s) found
| scanning bus usb at 1302280000 for devices... 2 USB Device(s) found
| scanning bus usb at 702280000 for devices... 1 USB Device(s) found
| scanning bus usb at b02280000 for devices... Resetting EP 0...
| WARN halted endpoint, queueing URB anyway.
| Unexpected XHCI event TRB, skipping... (c92247b0 0000010f 13000000 02008400)
| "Synchronous Abort" handler, esr 0x96000005
| elr: 0000000000039d9c lr : 0000000000039d9c (reloc)
| elr: 0000010fcd240d9c lr : 0000010fcd240d9c
| x0 : 0000000000000000 x1 : 00000000000003e8
| x2 : 0000000000000040 x3 : 000000000000003f
| x4 : 0000010fc9223040 x5 : 0000010fc921ef90
| x6 : 0000000000001800 x7 : 00000000300c0300
| x8 : 0000000000000424 x9 : 0000000000000008
| x10: 00000000ffffffe8 x11: 0000000000000010
| x12: 0000000000010000 x13: 0000000000000001
| x14: 0000010fc91ba320 x15: 0000000000000021
| x16: 0000010fcd23addc x17: 0000000000000040
| x18: 0000010fc91e7d70 x19: 0000010fc9223040
| x20: 0000010fc9234b20 x21: 0000000000000002
| x22: 0000010fc9233790 x23: 0000000000000080
| x24: 0000000000000000 x25: 0000010fc91b9d00
| x26: 0000010fc91b9d00 x27: 0000010fc9233790
| x28: 0000000000000000 x29: 0000010fc91b99b0
| 
| Code: 97ffff3c 52800401 aa1303e0 97ffffa2 (b9400c00)

objdump -lSD u-boot | grep -C 12 ' 39d9c'

| Disassembly of section .text_rest:
| ...
|    39d84:       f9400c36        ldr     x22, [x1, #24]
| /home/janne/src/asahi/u-boot/drivers/usb/host/xhci-ring.c:544
| 	xhci_queue_command(ctrl, 0, udev->slot_id, ep_index, TRB_STOP_RING);
|    39d88:       d2800001        mov     x1, #0x0                        // #0
|    39d8c:       97ffff3c        bl      39a7c <xhci_queue_command>
| /home/janne/src/asahi/u-boot/drivers/usb/host/xhci-ring.c:546
| 	event = xhci_wait_for_event(ctrl, TRB_TRANSFER);
|    39d90:       52800401        mov     w1, #0x20                       // #32
|    39d94:       aa1303e0        mov     x0, x19
|    39d98:       97ffffa2        bl      39c20 <xhci_wait_for_event>
| /home/janne/src/asahi/u-boot/drivers/usb/host/xhci-ring.c:547
| 	field = le32_to_cpu(event->trans_event.flags);
|    39d9c:       b9400c00        ldr     w0, [x0, #12]
| /home/janne/src/asahi/u-boot/drivers/usb/host/xhci-ring.c:548
| 	BUG_ON(TRB_TO_SLOT_ID(field) != udev->slot_id);
|    39da0:       b9494681        ldr     w1, [x20, #2372]
|    39da4:       6b40603f        cmp     w1, w0, lsr #24
|    39da8:       54000180        b.eq    39dd8 <abort_td+0x8c>  // b.none
| /home/janne/src/asahi/u-boot/drivers/usb/host/xhci-ring.c:548 (discriminator 1)
|    39dac:       90000143        adrp    x3, 61000 <crc16_tab+0x170>
|    39db0:       913d0863        add     x3, x3, #0xf42
|    39db4:       52804482        mov     w2, #0x224                      // #548
| /home/janne/src/asahi/u-boot/drivers/usb/host/xhci-ring.c:549 (discriminator 1)
| 	BUG_ON(TRB_TO_EP_INDEX(field) != ep_index);
|    39db8:       b0000181        adrp    x1, 6a000 <names.0+0x11cb>

not immediately obvious to me what's the problem. x0 looks valid before the ldr.

best regards

Janne