[PATCH v4 4/4] arm: mach-k3: Increase SYSFW max image size

[Manorit Chawdhry]

From: Dave Gerlach <d-gerlach at ti.com>

When booting with HS silicon, the system firmware image is 278270, which
is slightly larger than currently allocated amount.

This can cause unexpected behavior if this overlap interferes with other
things in memory, so increase this with a slightly margin added as well
to avoid any boot issues that can appear after system firmware gets
loaded.

Signed-off-by: Dave Gerlach <d-gerlach at ti.com>
Signed-off-by: Tero Kristo <kristo at kernel.org>
Signed-off-by: Manorit Chawdhry <m-chawdhry at ti.com>
---
 arch/arm/mach-k3/Kconfig | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/arm/mach-k3/Kconfig b/arch/arm/mach-k3/Kconfig
index 0991b42423a0..bae0a827c29f 100644
--- a/arch/arm/mach-k3/Kconfig
+++ b/arch/arm/mach-k3/Kconfig
@@ -141,8 +141,7 @@ config K3_SYSFW_IMAGE_MMCSD_RAW_MODE_PART
 config K3_SYSFW_IMAGE_SIZE_MAX
 	int "Amount of memory dynamically allocated for loading SYSFW blob"
 	depends on K3_LOAD_SYSFW
-	default 163840 if SOC_K3_AM625 || SOC_K3_AM62A7
-	default	278000
+	default	280000
 	help
 	  Amount of memory (in bytes) reserved through dynamic allocation at
 	  runtime for loading the combined System Firmware and configuration image
-- 
2.34.1