[PATCH v4 11/14] net: fec_mxc: Add board_interface_eth_init() for i.MX8M Mini/Nano/Plus
Marek Vasut
marex at denx.de
Mon Mar 6 15:53:51 CET 2023
Implement common board_interface_eth_init() and call it from the FEC
driver to configure IOMUXC GPR[1] register according to the PHY mode
obtained from DT. This supports all three interface modes supported by
the i.MX8M Mini/Nano/Plus FEC and supersedes the current board-side
configuration of the same IOMUX GPR[1] duplicated in the board files.
Signed-off-by: Marek Vasut <marex at denx.de>
---
Cc: "Ariel D'Alessandro" <ariel.dalessandro at collabora.com>
Cc: "NXP i.MX U-Boot Team" <uboot-imx at nxp.com>
Cc: Andrey Zhizhikin <andrey.zhizhikin at leica-geosystems.com>
Cc: Fabio Estevam <festevam at gmail.com>
Cc: Joe Hershberger <joe.hershberger at ni.com>
Cc: Lukasz Majewski <lukma at denx.de>
Cc: Marcel Ziswiler <marcel.ziswiler at toradex.com>
Cc: Marek Vasut <marex at denx.de>
Cc: Michael Trimarchi <michael at amarulasolutions.com>
Cc: Peng Fan <peng.fan at nxp.com>
Cc: Ramon Fried <rfried.dev at gmail.com>
Cc: Sean Anderson <seanga2 at gmail.com>
Cc: Stefano Babic <sbabic at denx.de>
Cc: Tim Harvey <tharvey at gateworks.com>
Cc: Tommaso Merciai <tommaso.merciai at amarulasolutions.com>
Cc: u-boot at lists.denx.de
---
V3: New patch
V4: Drop ifdef MX8MP around imx8mp_fec_interface_init
---
arch/arm/include/asm/arch-imx8m/imx-regs.h | 2 +
arch/arm/mach-imx/imx8m/clock_imx8mm.c | 46 ++++++++++++++++++++++
drivers/net/fec_mxc.c | 4 ++
3 files changed, 52 insertions(+)
diff --git a/arch/arm/include/asm/arch-imx8m/imx-regs.h b/arch/arm/include/asm/arch-imx8m/imx-regs.h
index 1818b459fa6..6e2fc82a0e4 100644
--- a/arch/arm/include/asm/arch-imx8m/imx-regs.h
+++ b/arch/arm/include/asm/arch-imx8m/imx-regs.h
@@ -89,6 +89,7 @@
#define DDRC_IPS_BASE_ADDR(X) (0x3d400000 + ((X) * 0x2000000))
#define DDR_CSD1_BASE_ADDR 0x40000000
+#define IOMUXC_GPR_GPR1_GPR_ENET1_RGMII_EN BIT(22)
#define IOMUXC_GPR_GPR1_GPR_ENET_QOS_RGMII_EN BIT(21)
#define IOMUXC_GPR_GPR1_GPR_ENET_QOS_CLK_TX_CLK_SEL BIT(20)
#define IOMUXC_GPR_GPR1_GPR_ENET_QOS_CLK_GEN_EN BIT(19)
@@ -96,6 +97,7 @@
#define IOMUXC_GPR_GPR1_GPR_ENET_QOS_INTF_SEL_MII (0 << 16)
#define IOMUXC_GPR_GPR1_GPR_ENET_QOS_INTF_SEL_RGMII (1 << 16)
#define IOMUXC_GPR_GPR1_GPR_ENET_QOS_INTF_SEL_RMII (4 << 16)
+#define IOMUXC_GPR_GPR1_GPR_ENET1_TX_CLK_SEL BIT(13)
#define FEC_QUIRK_ENET_MAC
#ifdef CONFIG_ARMV8_PSCI /* Final jump location */
diff --git a/arch/arm/mach-imx/imx8m/clock_imx8mm.c b/arch/arm/mach-imx/imx8m/clock_imx8mm.c
index 1546c9ba9a0..32f8623f235 100644
--- a/arch/arm/mach-imx/imx8m/clock_imx8mm.c
+++ b/arch/arm/mach-imx/imx8m/clock_imx8mm.c
@@ -968,10 +968,56 @@ int set_clk_enet(enum enet_freq type)
return 0;
}
+
+static int imx8mp_fec_interface_init(struct udevice *dev,
+ phy_interface_t interface_type,
+ bool mx8mp)
+{
+ /* i.MX8MP has extra RGMII_EN bit in IOMUXC GPR1 register */
+ const u32 rgmii_en = mx8mp ? IOMUXC_GPR_GPR1_GPR_ENET1_RGMII_EN : 0;
+ struct iomuxc_gpr_base_regs *gpr =
+ (struct iomuxc_gpr_base_regs *)IOMUXC_GPR_BASE_ADDR;
+
+ clrbits_le32(&gpr->gpr[1],
+ rgmii_en |
+ IOMUXC_GPR_GPR1_GPR_ENET1_TX_CLK_SEL);
+
+ switch (interface_type) {
+ case PHY_INTERFACE_MODE_MII:
+ case PHY_INTERFACE_MODE_RMII:
+ setbits_le32(&gpr->gpr[1], IOMUXC_GPR_GPR1_GPR_ENET1_TX_CLK_SEL);
+ break;
+ case PHY_INTERFACE_MODE_RGMII:
+ case PHY_INTERFACE_MODE_RGMII_ID:
+ case PHY_INTERFACE_MODE_RGMII_RXID:
+ case PHY_INTERFACE_MODE_RGMII_TXID:
+ setbits_le32(&gpr->gpr[1], rgmii_en);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
#endif
int board_interface_eth_init(struct udevice *dev, phy_interface_t interface_type)
{
+ if (IS_ENABLED(CONFIG_IMX8MM) &&
+ IS_ENABLED(CONFIG_FEC_MXC) &&
+ device_is_compatible(dev, "fsl,imx8mm-fec"))
+ return imx8mp_fec_interface_init(dev, interface_type, false);
+
+ if (IS_ENABLED(CONFIG_IMX8MN) &&
+ IS_ENABLED(CONFIG_FEC_MXC) &&
+ device_is_compatible(dev, "fsl,imx8mn-fec"))
+ return imx8mp_fec_interface_init(dev, interface_type, false);
+
+ if (IS_ENABLED(CONFIG_IMX8MP) &&
+ IS_ENABLED(CONFIG_FEC_MXC) &&
+ device_is_compatible(dev, "fsl,imx8mp-fec"))
+ return imx8mp_fec_interface_init(dev, interface_type, true);
+
if (IS_ENABLED(CONFIG_IMX8MP) &&
IS_ENABLED(CONFIG_DWC_ETH_QOS) &&
device_is_compatible(dev, "nxp,imx8mp-dwmac-eqos"))
diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c
index 7a8577158ae..ac937676f9c 100644
--- a/drivers/net/fec_mxc.c
+++ b/drivers/net/fec_mxc.c
@@ -1232,6 +1232,10 @@ static int fecmxc_probe(struct udevice *dev)
uint32_t start;
int ret;
+ ret = board_interface_eth_init(dev, pdata->phy_interface);
+ if (ret)
+ return ret;
+
if (IS_ENABLED(CONFIG_IMX_MODULE_FUSE)) {
if (enet_fused((ulong)priv->eth)) {
printf("SoC fuse indicates Ethernet at 0x%lx is unavailable.\n", (ulong)priv->eth);
--
2.39.2
More information about the U-Boot
mailing list