[PATCH v2 2/5] clk: at91: sam9x60: Register the required clocks for USB

Claudiu Beznea claudiu.beznea at microchip.com
Wed Mar 8 15:39:51 CET 2023


From: Sergiu Moga <sergiu.moga at microchip.com>

Register into DM the clocks required to properly enable USB functionality
within the bootloader.

Signed-off-by: Sergiu Moga <sergiu.moga at microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea at microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea at microchip.com>
---
 drivers/clk/at91/sam9x60.c | 33 +++++++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

diff --git a/drivers/clk/at91/sam9x60.c b/drivers/clk/at91/sam9x60.c
index 6b5486c6c9eb..14c2ffcac18b 100644
--- a/drivers/clk/at91/sam9x60.c
+++ b/drivers/clk/at91/sam9x60.c
@@ -76,6 +76,8 @@ enum pmc_clk_ids {
 	ID_QSPI			= 18,
 
 	ID_MCK_PRES		= 19,
+	ID_USBCK		= 20,
+	ID_UHPCK		= 21,
 
 	ID_MAX,
 };
@@ -99,6 +101,7 @@ static const char *clk_names[] = {
 	[ID_PLL_A_DIV]		= "plla_divpmcck",
 	[ID_MCK_PRES]		= "mck_pres",
 	[ID_MCK_DIV]		= "mck_div",
+	[ID_USBCK]		= "usbck",
 };
 
 /* Fractional PLL output range. */
@@ -171,6 +174,13 @@ static const struct clk_pcr_layout pcr_layout = {
 	.pid_mask = GENMASK(6, 0),
 };
 
+/* USB clock layout */
+static const struct clk_usbck_layout usbck_layout = {
+	.offset = 0x38,
+	.usbs_mask = GENMASK(1, 0),
+	.usbdiv_mask = GENMASK(11, 8),
+};
+
 /**
  * PLL clocks description
  * @n:		clock name
@@ -266,6 +276,7 @@ static const struct {
 	u8 cid;
 } sam9x60_systemck[] = {
 	{ .n = "ddrck",		.p = "mck_div",  .id = 2, .cid = ID_DDR, },
+	{ .n = "uhpck",		.p = "usbck",    .id = 6, .cid = ID_UHPCK },
 	{ .n = "pck0",		.p = "prog0",    .id = 8, .cid = ID_PCK0, },
 	{ .n = "pck1",		.p = "prog1",    .id = 9, .cid = ID_PCK1, },
 	{ .n = "qspick",	.p = "mck_div",  .id = 19, .cid = ID_QSPI, },
@@ -543,6 +554,28 @@ static int sam9x60_clk_probe(struct udevice *dev)
 	}
 	clk_dm(AT91_TO_CLK_ID(PMC_TYPE_CORE, ID_MCK_DIV), c);
 
+	/* Register usbck. */
+	p[0] = clk_names[ID_PLL_A_DIV];
+	p[1] = clk_names[ID_PLL_U_DIV];
+	p[2] = clk_names[ID_MAIN_XTAL];
+	m[0] = 0;
+	m[1] = 1;
+	m[2] = 2;
+	cm[0] = AT91_TO_CLK_ID(PMC_TYPE_CORE, ID_PLL_A_DIV);
+	cm[1] = AT91_TO_CLK_ID(PMC_TYPE_CORE, ID_PLL_U_DIV);
+	cm[2] = AT91_TO_CLK_ID(PMC_TYPE_CORE, ID_MAIN_XTAL);
+	prepare_mux_table(clkmuxallocs, clkmuxallocindex, tmpclkmux, cm,
+			  3, fail);
+	prepare_mux_table(muxallocs, muxallocindex, tmpmux, m, 3, fail);
+	c = sam9x60_clk_register_usb(base, clk_names[ID_USBCK], p, 3,
+				     &usbck_layout, tmpclkmux, tmpmux,
+				     ID_USBCK);
+	if (IS_ERR(c)) {
+		ret = PTR_ERR(c);
+		goto fail;
+	}
+	clk_dm(AT91_TO_CLK_ID(PMC_TYPE_CORE, ID_USBCK), c);
+
 	/* Register programmable clocks. */
 	p[0] = clk_names[ID_MD_SLCK];
 	p[1] = clk_names[ID_TD_SLCK];
-- 
2.34.1



More information about the U-Boot mailing list