[PATCH v2 2/3] phy: rockchip-inno-usb2: add initial support for rk3588 PHY

Eugen Hristev eugen.hristev at collabora.com
Thu Mar 9 13:23:11 CET 2023


Add initial support for the rk3588 PHY variant.
The driver now looks for phy-supply and enables/disables the vbus
accordingly.
The lookup for the host-port reg inside the struct now does a do {} while()
instead of a while() {} in order to allow a first check for reg == 0.

Co-developed-by: Frank Wang <frank.wang at rock-chips.com>
Signed-off-by: Frank Wang <frank.wang at rock-chips.com>
Signed-off-by: Eugen Hristev <eugen.hristev at collabora.com>
Tested-by: Vasily Khoruzhick <anarsoul at gmail.com> # rk3568-based board
---
 drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 109 +++++++++++++++++-
 1 file changed, 104 insertions(+), 5 deletions(-)

diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
index 55e1dbcfef7e..1221c597eac1 100644
--- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
+++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
@@ -13,6 +13,7 @@
 #include <dm/device_compat.h>
 #include <dm/lists.h>
 #include <generic-phy.h>
+#include <power/regulator.h>
 #include <reset.h>
 #include <syscon.h>
 #include <asm/gpio.h>
@@ -61,6 +62,7 @@ struct rockchip_usb2phy_cfg {
 struct rockchip_usb2phy {
 	void *reg_base;
 	struct clk phyclk;
+	struct udevice *vbus_supply[USB2PHY_NUM_PORTS];
 	const struct rockchip_usb2phy_cfg *phy_cfg;
 };
 
@@ -86,11 +88,34 @@ struct rockchip_usb2phy_port_cfg *us2phy_get_port(struct phy *phy)
 	return &phy_cfg->port_cfgs[phy->id];
 }
 
+static struct udevice *rockchip_usb2phy_check_vbus(struct phy *phy)
+{
+	struct udevice *parent = phy->dev->parent;
+	struct rockchip_usb2phy *priv = dev_get_priv(parent);
+	struct udevice *vbus = NULL;
+
+	if (phy->id == USB2PHY_PORT_HOST)
+		vbus = priv->vbus_supply[USB2PHY_PORT_HOST];
+
+	return vbus;
+}
+
 static int rockchip_usb2phy_power_on(struct phy *phy)
 {
 	struct udevice *parent = dev_get_parent(phy->dev);
 	struct rockchip_usb2phy *priv = dev_get_priv(parent);
 	const struct rockchip_usb2phy_port_cfg *port_cfg = us2phy_get_port(phy);
+	struct udevice *vbus = NULL;
+	int ret;
+
+	vbus = rockchip_usb2phy_check_vbus(phy);
+	if (vbus) {
+		ret = regulator_set_enable(vbus, true);
+		if (ret) {
+			dev_err(phy->dev, "vbus enable failed: %d\n", ret);
+			return ret;
+		}
+	}
 
 	property_enable(priv->reg_base, &port_cfg->phy_sus, false);
 
@@ -105,6 +130,17 @@ static int rockchip_usb2phy_power_off(struct phy *phy)
 	struct udevice *parent = dev_get_parent(phy->dev);
 	struct rockchip_usb2phy *priv = dev_get_priv(parent);
 	const struct rockchip_usb2phy_port_cfg *port_cfg = us2phy_get_port(phy);
+	struct udevice *vbus = NULL;
+	int ret;
+
+	vbus = rockchip_usb2phy_check_vbus(phy);
+	if (vbus) {
+		ret = regulator_set_enable(vbus, false);
+		if (ret && ret != -EACCES) {
+			dev_info(phy->dev, "vbus disable failed: %d\n", ret);
+			return ret;
+		}
+	}
 
 	property_enable(priv->reg_base, &port_cfg->phy_sus, true);
 
@@ -149,13 +185,20 @@ static int rockchip_usb2phy_of_xlate(struct phy *phy,
 				     struct ofnode_phandle_args *args)
 {
 	const char *name = phy->dev->name;
+	struct udevice *parent = phy->dev->parent;
+	struct rockchip_usb2phy *priv = dev_get_priv(parent);
 
-	if (!strcasecmp(name, "host-port"))
+	if (!strcasecmp(name, "host-port")) {
 		phy->id = USB2PHY_PORT_HOST;
-	else if (!strcasecmp(name, "otg-port"))
+		device_get_supply_regulator(phy->dev, "phy-supply",
+					    &priv->vbus_supply[USB2PHY_PORT_HOST]);
+	} else if (!strcasecmp(name, "otg-port")) {
 		phy->id = USB2PHY_PORT_OTG;
-	else
+		device_get_supply_regulator(phy->dev, "phy-supply",
+					    &priv->vbus_supply[USB2PHY_PORT_OTG]);
+	} else {
 		dev_err(phy->dev, "improper %s device\n", name);
+	}
 
 	return 0;
 }
@@ -201,14 +244,14 @@ static int rockchip_usb2phy_probe(struct udevice *dev)
 
 	/* find out a proper config which can be matched with dt. */
 	index = 0;
-	while (phy_cfgs[index].reg) {
+	do {
 		if (phy_cfgs[index].reg == reg) {
 			priv->phy_cfg = &phy_cfgs[index];
 			break;
 		}
 
 		++index;
-	}
+	} while (phy_cfgs[index].reg);
 
 	if (!priv->phy_cfg) {
 		dev_err(dev, "failed find proper phy-cfg\n");
@@ -348,6 +391,58 @@ static const struct rockchip_usb2phy_cfg rk3568_phy_cfgs[] = {
 	{ /* sentinel */ }
 };
 
+static const struct rockchip_usb2phy_cfg rk3588_phy_cfgs[] = {
+	{
+		.reg		= 0x0000,
+		.port_cfgs	= {
+			[USB2PHY_PORT_OTG] = {
+				.phy_sus	= { 0x000c, 11, 11, 0, 1 },
+				.ls_det_en	= { 0x0080, 0, 0, 0, 1 },
+				.ls_det_st	= { 0x0084, 0, 0, 0, 1 },
+				.ls_det_clr	= { 0x0088, 0, 0, 0, 1 },
+				.utmi_ls	= { 0x00c0, 10, 9, 0, 1 },
+			}
+		},
+	},
+	{
+		.reg		= 0x4000,
+		.port_cfgs	= {
+			[USB2PHY_PORT_OTG] = {
+				.phy_sus	= { 0x000c, 11, 11, 0, 0 },
+				.ls_det_en	= { 0x0080, 0, 0, 0, 1 },
+				.ls_det_st	= { 0x0084, 0, 0, 0, 1 },
+				.ls_det_clr	= { 0x0088, 0, 0, 0, 1 },
+				.utmi_ls	= { 0x00c0, 10, 9, 0, 1 },
+			}
+		},
+	},
+	{
+		.reg		= 0x8000,
+		.port_cfgs	= {
+			[USB2PHY_PORT_HOST] = {
+				.phy_sus	= { 0x0008, 2, 2, 0, 1 },
+				.ls_det_en	= { 0x0080, 0, 0, 0, 1 },
+				.ls_det_st	= { 0x0084, 0, 0, 0, 1 },
+				.ls_det_clr	= { 0x0088, 0, 0, 0, 1 },
+				.utmi_ls	= { 0x00c0, 10, 9, 0, 1 },
+			}
+		},
+	},
+	{
+		.reg		= 0xc000,
+		.port_cfgs	= {
+			[USB2PHY_PORT_HOST] = {
+				.phy_sus	= { 0x0008, 2, 2, 0, 1 },
+				.ls_det_en	= { 0x0080, 0, 0, 0, 1 },
+				.ls_det_st	= { 0x0084, 0, 0, 0, 1 },
+				.ls_det_clr	= { 0x0088, 0, 0, 0, 1 },
+				.utmi_ls	= { 0x00c0, 10, 9, 0, 1 },
+			}
+		},
+	},
+	{ /* sentinel */ }
+};
+
 static const struct udevice_id rockchip_usb2phy_ids[] = {
 	{
 		.compatible = "rockchip,rk3399-usb2phy",
@@ -357,6 +452,10 @@ static const struct udevice_id rockchip_usb2phy_ids[] = {
 		.compatible = "rockchip,rk3568-usb2phy",
 		.data = (ulong)&rk3568_phy_cfgs,
 	},
+	{
+		.compatible = "rockchip,rk3588-usb2phy",
+		.data = (ulong)&rk3588_phy_cfgs,
+	},
 	{ /* sentinel */ }
 };
 
-- 
2.34.1



More information about the U-Boot mailing list