[PATCH 04/13] x86: ivybridge: Ensure LPC is available for GPIO base

[Simon Glass]

The bd82x6x_get_gpio_base() does not work if the LPC is not set up.
Probe it early to avoid this problem.

In chromebook_link64 this propblem shows up as an inability to read
the GPIO straps for the memory type.

Signed-off-by: Simon Glass <sjg at chromium.org>
---

 arch/x86/cpu/ivybridge/bd82x6x.c | 17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)

diff --git a/arch/x86/cpu/ivybridge/bd82x6x.c b/arch/x86/cpu/ivybridge/bd82x6x.c
index 89312a863499..417290f559e9 100644
--- a/arch/x86/cpu/ivybridge/bd82x6x.c
+++ b/arch/x86/cpu/ivybridge/bd82x6x.c
@@ -31,7 +31,6 @@ DECLARE_GLOBAL_DATA_PTR;
 #define RCBA_AUDIO_CONFIG_HDA	BIT(31)
 #define RCBA_AUDIO_CONFIG_MASK	0xfe
 
-#ifndef CONFIG_HAVE_FSP
 static int pch_revision_id = -1;
 static int pch_type = -1;
 
@@ -162,15 +161,19 @@ void pch_iobp_update(struct udevice *dev, u32 address, u32 andvalue,
 
 static int bd82x6x_probe(struct udevice *dev)
 {
-	if (!(gd->flags & GD_FLG_RELOC))
-		return 0;
+	/* make sure the LPC is inited since it provides the gpio base */
+	uclass_first_device(UCLASS_LPC, &dev);
+
+	if (!IS_ENABLED(CONFIG_HAVE_FSP)) {
+		if (!(gd->flags & GD_FLG_RELOC))
+			return 0;
 
-	/* Cause the SATA device to do its init */
-	uclass_first_device(UCLASS_AHCI, &dev);
+		/* Cause the SATA device to do its init */
+		uclass_first_device(UCLASS_AHCI, &dev);
+	}
 
 	return 0;
 }
-#endif /* CONFIG_HAVE_FSP */
 
 static int bd82x6x_pch_get_spi_base(struct udevice *dev, ulong *sbasep)
 {
@@ -269,8 +272,6 @@ U_BOOT_DRIVER(bd82x6x_drv) = {
 	.name		= "bd82x6x",
 	.id		= UCLASS_PCH,
 	.of_match	= bd82x6x_ids,
-#ifndef CONFIG_HAVE_FSP
 	.probe		= bd82x6x_probe,
-#endif
 	.ops		= &bd82x6x_pch_ops,
 };
-- 
2.40.0.rc1.284.g88254d51c5-goog