[PATCH 0/2] phy: ti: j721e-wiz: Add support to manage type-C swap on Lane2 and lane3

[Sinthu Raja]

From: Sinthu Raja <sinthu.raja at ti.com>

Hi All,
This series of patch add support to enable lane2 and lane3 swap by
configuring the LN23 bit. Also, it's possible that the Type-C plug orientation
on the DIR line will be implemented through hardware design. In that
situation, there won't be an external GPIO line available, but the
driver still needs to address this since the DT won't use the
typec-gpio-dir property. Update code to handle if typec-dir-gpios property
is not specified in DT.

Sinthu Raja (2):
  phy: ti: j721e-wiz: Manage TypeC lane swap if typec-dir-gpios not
    specified
  phy: ti: j721e-wiz: Add support to enable LN23 Type-C swap

 drivers/phy/ti/phy-j721e-wiz.c | 58 ++++++++++++++++++++++++++++------
 1 file changed, 49 insertions(+), 9 deletions(-)

-- 
2.36.1