[PATCH 1/9] drivers: video: Kconfig: Necessary configs for video at SPL
Devarsh Thakkar
devarsht at ti.com
Tue Mar 14 07:50:14 CET 2023
Hi Nikhil,
Thanks for the patch.
On 14/03/23 10:20, Nikhil M Jain wrote:
> Add necessary Kconfigs to enable video driver and enable splash screen
> at spl stage.
> CONFIG_SPL_VIDEO enables all necessary configs enabled by CONFIG_VIDEO
> at spl stage.
> CONFIG_SPL_SYS_WHITE_ON_BLACK allows displaying on black background at
> spl stage.
>
> These configs are specific to SPL and will allow us to enable the video
> driver and splash screen at SPL stage only and not at u-boot proper.
> The existing Kconfigs from u-boot proper were not used to make SPL
> splash screen independent to them.
>
> Enable BMP_GZIP at SPL stage when SPL_SPLASH_SCREEN or SPL_CMD_BMP are
> defined.
>
> Signed-off-by: Nikhil M Jain <n-jain1 at ti.com>
> ---
> drivers/video/Kconfig | 30 +++++++++++++++++++++++++++---
> 1 file changed, 27 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
> index 2a76d19cc8..1097e2c623 100644
> --- a/drivers/video/Kconfig
> +++ b/drivers/video/Kconfig
> @@ -14,7 +14,17 @@ config VIDEO
> option compiles in the video uclass and routes all LCD/video access
> through this.
>
> -if VIDEO
> +config SPL_VIDEO
> + bool "Enable driver model support for LCD/video"
> + depends on SPL_DM
> + help
> + The video subsystem adds a small amount of overhead to the image.
> + If this is acceptable and you have a need to use video drivers in
> + SPL, enable this option. It might provide a cleaner interface to
> + setting up video within SPL, and allows the same drivers to be
> + used as U-Boot proper.
> +
> +if VIDEO || SPL_VIDEO
>
> config VIDEO_LOGO
> bool "Show the U-Boot logo on the display"
> @@ -193,6 +203,14 @@ config SYS_WHITE_ON_BLACK
> better in low-light situations or to reduce eye strain in some
> cases.
>
My understanding is that for all the common macros under (VIDEO ||
SPL_VIDEO)
(for e.g. like CONFIG_VIDEO_LOGO) code will get compiled in both u-boot
proper at SPL even
if intended to be enabled for only on of them.
For e.g. you enable CONFIG_VIDEO_LOGO with CONFIG_VIDEO set aiming to
compiled them
only for u-boot proper but corresponding code will also get compiled for
u-boot SPL now.
Please confirm but If this is true then from my point of view I think we
need
unique SPL_VIDEO_* macro (which will depend on SPL_VIDEO) for each of
the VIDEO_* macros
getting used generally or probably all of them. And use
CONFIG_IS_ENABLED at all places in video drivers
for each of the macros. Lastly you may also have to update relevant docs
viz.
docs/README.spl and video related docs if any.
> +config SPL_SYS_WHITE_ON_BLACK
> + bool "Display console as white on a black background"
> + help
This should depend upon SPL_VIDEO
> + Normally the display is black on a white background, Enable this
> + option to invert this, i.e. white on a black background at spl stage.
> + This can be better in low-light situations or to reduce eye strain in
> + some cases.
> +
> config NO_FB_CLEAR
> bool "Skip framebuffer clear"
> help
> @@ -795,7 +813,13 @@ config SPLASH_SCREEN
> image data before it is processed and sent to the frame buffer by
> U-Boot. Define your own version to use this feature.
>
> -if SPLASH_SCREEN
> +config SPL_SPLASH_SCREEN
> + bool "Show a splash-screen image"
Same here.
> + help
> + If this option is set, the environment is checked for a variable
> + "splashimage" at spl stage.
> +
> +if SPLASH_SCREEN || SPL_SPLASH_SCREEN
>
If going with above suggested approach then you will need to make
unique macros for SPL.
Regards
Devarsh
> config SPLASH_SCREEN_ALIGN
> bool "Allow positioning the splash image anywhere on the display"
> @@ -863,7 +887,7 @@ endif # SPLASH_SCREEN
>
> config VIDEO_BMP_GZIP
> bool "Gzip compressed BMP image support"
> - depends on CMD_BMP || SPLASH_SCREEN
> + depends on CMD_BMP || SPLASH_SCREEN || SPL_SPLASH_SCREEN || SPL_CMD_BMP
> help
> If this option is set, additionally to standard BMP
> images, gzipped BMP images can be displayed via the
More information about the U-Boot
mailing list