[PATCH 2/3] include: configs: j721s2_evm: Change to using .env

Neha Malcom Francis n-francis at ti.com
Tue Mar 14 11:37:51 CET 2023


Move to using .env file for setting up environment variables for J721S2.

Signed-off-by: Neha Malcom Francis <n-francis at ti.com>
---
 board/ti/j721s2/Kconfig      |   6 ++
 board/ti/j721s2/j721s2.env   |  53 ++++++++++++++++
 include/configs/j721s2_evm.h | 118 +----------------------------------
 3 files changed, 60 insertions(+), 117 deletions(-)
 create mode 100644 board/ti/j721s2/j721s2.env

diff --git a/board/ti/j721s2/Kconfig b/board/ti/j721s2/Kconfig
index 6141798333..70972d1227 100644
--- a/board/ti/j721s2/Kconfig
+++ b/board/ti/j721s2/Kconfig
@@ -40,6 +40,9 @@ config SYS_VENDOR
 config SYS_CONFIG_NAME
        default "j721s2_evm"
 
+config ENV_SOURCE_FILE
+       default "j721s2"
+
 source "board/ti/common/Kconfig"
 
 endif
@@ -55,6 +58,9 @@ config SYS_VENDOR
 config SYS_CONFIG_NAME
        default "j721s2_evm"
 
+config ENV_SOURCE_FILE
+       default "j721s2"
+
 source "board/ti/common/Kconfig"
 
 endif
diff --git a/board/ti/j721s2/j721s2.env b/board/ti/j721s2/j721s2.env
new file mode 100644
index 0000000000..1eb5549b4c
--- /dev/null
+++ b/board/ti/j721s2/j721s2.env
@@ -0,0 +1,53 @@
+#include <environment/ti/ti_armv7_common.env>
+#include <environment/ti/mmc.env>
+#include <environment/ti/k3_rproc.env>
+#include <environment/ti/ufs.env>
+#include <environment/ti/k3_dfu.env>
+
+default_device_tree=k3-j721s2-common-proc-board.dtb
+findfdt=
+	setenv name_fdt ${default_device_tree};
+	if test $board_name = j721s2; then			\
+		setenv name_fdt k3-j721s2-common-proc-board.dtb; fi;
+	if test $board_name = am68-sk; then
+		setenv name_fdt k3-am68-sk-base-board.dtb; fi;
+	setenv fdtfile ${name_fdt}
+name_kern=Image
+console=ttyS2,115200n8
+args_all=setenv optargs earlycon=ns16550a,mmio32,0x02880000
+	${mtdparts}
+run_kern=booti ${loadaddr} ${rd_spec} ${fdtaddr}
+
+boot=mmc
+mmcdev=1
+bootpart=1:2
+bootdir=/boot
+#if CONFIG_SYS_K3_SPL_ATF
+#if CONFIG_TARGET_J721S2_R5_EVM
+addr_mcur5f0_0load=0x89000000
+name_mcur5f0_0fw=/lib/firmware/j7-mcu-r5f0_0-fw
+#endif
+#endif
+rd_spec=-
+init_mmc=run args_all args_mmc
+get_fdt_mmc=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${name_fdt}
+get_overlay_mmc=
+	fdt address ${fdtaddr};
+	fdt resize 0x100000;
+	for overlay in $name_overlays;
+	do;
+	load mmc ${bootpart} ${dtboaddr} ${bootdir}/${overlay} &&
+	fdt apply ${dtboaddr};
+	done;
+partitions=uuid_disk=${uuid_gpt_disk};
+	name=rootfs,start=0,size=-,uuid=${uuid_gpt_rootfs}
+get_kern_mmc=load mmc ${bootpart} ${loadaddr}
+	${bootdir}/${name_kern}
+get_fit_mmc=load mmc ${bootpart} ${addr_fit}
+	${bootdir}/${name_fit}
+partitions=uuid_disk=${uuid_gpt_disk};
+	name=rootfs,start=0,size=-,uuid=${uuid_gpt_rootfs}
+
+rproc_fw_binaries= 2 /lib/firmware/j721s2-main-r5f0_0-fw 3 /lib/firmware/j721s2-main-r5f0_1-fw 4 /lib/firmware/j721s2-main-r5f1_0-fw 5 /lib/firmware/j721s2-main-r5f1_1-fw 6 /lib/firmware/j721s2-c71_0-fw 7 /lib/firmware/j721s2-c71_1-fw
+
+
diff --git a/include/configs/j721s2_evm.h b/include/configs/j721s2_evm.h
index bfada9eebc..2fa93b7961 100644
--- a/include/configs/j721s2_evm.h
+++ b/include/configs/j721s2_evm.h
@@ -11,10 +11,6 @@
 
 #include <linux/sizes.h>
 #include <config_distro_bootcmd.h>
-#include <environment/ti/mmc.h>
-#include <environment/ti/k3_rproc.h>
-#include <environment/ti/ufs.h>
-#include <environment/ti/k3_dfu.h>
 
 /* DDR Configuration */
 #define CFG_SYS_SDRAM_BASE1		0x880000000
@@ -27,120 +23,8 @@
 #define CFG_SYS_UBOOT_BASE		0x50080000
 #endif
 
-/* U-Boot general configuration */
-#define EXTRA_ENV_J721S2_BOARD_SETTINGS					\
-	"default_device_tree=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0"	\
-	"findfdt="							\
-		"setenv name_fdt ${default_device_tree};"		\
-		"if test $board_name = j721s2; then "			\
-			"setenv name_fdt k3-j721s2-common-proc-board.dtb; fi;" \
-		"if test $board_name = am68-sk; then "			\
-			"setenv name_fdt k3-am68-sk-base-board.dtb; fi;"\
-		"setenv fdtfile ${name_fdt}\0"				\
-	"name_kern=Image\0"						\
-	"console=ttyS2,115200n8\0"					\
-	"args_all=setenv optargs earlycon=ns16550a,mmio32,0x02880000 "	\
-		"${mtdparts}\0"						\
-	"run_kern=booti ${loadaddr} ${rd_spec} ${fdtaddr}\0"
-
-#define PARTS_DEFAULT \
-	/* Linux partitions */ \
-	"uuid_disk=${uuid_gpt_disk};" \
-	"name=rootfs,start=0,size=-,uuid=${uuid_gpt_rootfs}\0"
-
-#ifdef CONFIG_SYS_K3_SPL_ATF
-#if defined(CONFIG_TARGET_J721S2_R5_EVM)
-#define EXTRA_ENV_R5_SPL_RPROC_FW_ARGS_MMC				\
-	"addr_mcur5f0_0load=0x89000000\0"				\
-	"name_mcur5f0_0fw=/lib/firmware/j7-mcu-r5f0_0-fw\0"
-#elif defined(CONFIG_TARGET_J7200_R5_EVM)
-#define EXTRA_ENV_R5_SPL_RPROC_FW_ARGS_MMC				\
-	"addr_mcur5f0_0load=0x89000000\0"				\
-	"name_mcur5f0_0fw=/lib/firmware/j7200-mcu-r5f0_0-fw\0"
-#endif /* CONFIG_TARGET_J721S2_R5_EVM */
-#else
-#define EXTRA_ENV_R5_SPL_RPROC_FW_ARGS_MMC ""
-#endif /* CONFIG_SYS_K3_SPL_ATF */
-
-/* U-Boot MMC-specific configuration */
-#define EXTRA_ENV_J721S2_BOARD_SETTINGS_MMC				\
-	"boot=mmc\0"							\
-	"mmcdev=1\0"							\
-	"bootpart=1:2\0"						\
-	"bootdir=/boot\0"						\
-	EXTRA_ENV_R5_SPL_RPROC_FW_ARGS_MMC				\
-	"rd_spec=-\0"							\
-	"init_mmc=run args_all args_mmc\0"				\
-	"get_fdt_mmc=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${name_fdt}\0" \
-	"get_overlay_mmc="						\
-		"fdt address ${fdtaddr};"				\
-		"fdt resize 0x100000;"					\
-		"for overlay in $name_overlays;"			\
-		"do;"							\
-		"load mmc ${bootpart} ${dtboaddr} ${bootdir}/${overlay} && "	\
-		"fdt apply ${dtboaddr};"				\
-		"done;\0"						\
-	"partitions=" PARTS_DEFAULT					\
-	"get_kern_mmc=load mmc ${bootpart} ${loadaddr} "		\
-		"${bootdir}/${name_kern}\0"				\
-	"get_fit_mmc=load mmc ${bootpart} ${addr_fit} "			\
-		"${bootdir}/${name_fit}\0"				\
-	"partitions=" PARTS_DEFAULT
-
-/* Set the default list of remote processors to boot */
-#if defined(CONFIG_TARGET_J721S2_A72_EVM) || defined(CONFIG_TARGET_J7200_A72_EVM)
-#ifdef DEFAULT_RPROCS
-#undef DEFAULT_RPROCS
-#endif
-#endif
-
-#ifdef CONFIG_TARGET_J721S2_A72_EVM
-#define DEFAULT_RPROCS	""						\
-		"2 /lib/firmware/j721s2-main-r5f0_0-fw "			\
-		"3 /lib/firmware/j721s2-main-r5f0_1-fw "			\
-		"4 /lib/firmware/j721s2-main-r5f1_0-fw "			\
-		"5 /lib/firmware/j721s2-main-r5f1_1-fw "			\
-		"6 /lib/firmware/j721s2-c71_0-fw "				\
-		"7 /lib/firmware/j721s2-c71_1-fw "
-#endif /* CONFIG_TARGET_J721S2_A72_EVM */
-
-#ifdef CONFIG_TARGET_J7200_A72_EVM
-#define EXTRA_ENV_CONFIG_MAIN_CPSW0_QSGMII_PHY				\
-	"do_main_cpsw0_qsgmii_phyinit=1\0"				\
-	"init_main_cpsw0_qsgmii_phy=gpio set gpio at 22_17;"		\
-		 "gpio clear gpio at 22_16\0"				\
-	"main_cpsw0_qsgmii_phyinit="					\
-	"if test ${do_main_cpsw0_qsgmii_phyinit} -eq 1 && test ${dorprocboot} -eq 1 && " \
-			"test ${boot} = mmc; then "			\
-		"run init_main_cpsw0_qsgmii_phy;"			\
-	"fi;\0"
-#define DEFAULT_RPROCS ""						\
-		"2 /lib/firmware/j7200-main-r5f0_0-fw "			\
-		"3 /lib/firmware/j7200-main-r5f0_1-fw "
-#endif /* CONFIG_TARGET_J7200_A72_EVM */
-
-#ifndef EXTRA_ENV_CONFIG_MAIN_CPSW0_QSGMII_PHY
-#define EXTRA_ENV_CONFIG_MAIN_CPSW0_QSGMII_PHY
-#endif
-
-/* set default dfu_bufsiz to 128KB (sector size of OSPI) */
-#define EXTRA_ENV_DFUARGS \
-	DFU_ALT_INFO_MMC \
-	DFU_ALT_INFO_EMMC \
-	DFU_ALT_INFO_RAM \
-	DFU_ALT_INFO_OSPI
-
 /* Incorporate settings into the U-Boot environment */
-#define CFG_EXTRA_ENV_SETTINGS					\
-	DEFAULT_LINUX_BOOT_ENV						\
-	DEFAULT_MMC_TI_ARGS						\
-	DEFAULT_FIT_TI_ARGS						\
-	EXTRA_ENV_J721S2_BOARD_SETTINGS					\
-	EXTRA_ENV_J721S2_BOARD_SETTINGS_MMC				\
-	EXTRA_ENV_RPROC_SETTINGS					\
-	EXTRA_ENV_DFUARGS						\
-	DEFAULT_UFS_TI_ARGS						\
-	EXTRA_ENV_CONFIG_MAIN_CPSW0_QSGMII_PHY
+#define CFG_EXTRA_ENV_SETTINGS
 
 /* Now for the remaining common defines */
 #include <configs/ti_armv7_common.h>
-- 
2.34.1



More information about the U-Boot mailing list