[PATCH 1/2] mx53loco: Remove unused mx53loco_video.c file

[Fabio Estevam]

From: Fabio Estevam <festevam at denx.de>

Since commit 1fa43cad8625 ("video: Drop references to CONFIG_VIDEO et al")
the mx53loco_video.c is no longer used.

Remove the unused file.

Signed-off-by: Fabio Estevam <festevam at denx.de>
---
 board/freescale/mx53loco/mx53loco_video.c | 114 ----------------------
 1 file changed, 114 deletions(-)
 delete mode 100644 board/freescale/mx53loco/mx53loco_video.c

diff --git a/board/freescale/mx53loco/mx53loco_video.c b/board/freescale/mx53loco/mx53loco_video.c
deleted file mode 100644
index ff3fc8ce3e..0000000000
--- a/board/freescale/mx53loco/mx53loco_video.c
+++ /dev/null
@@ -1,114 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2012 Freescale Semiconductor, Inc.
- * Fabio Estevam <fabio.estevam at freescale.com>
- */
-
-#include <common.h>
-#include <env.h>
-#include <linux/list.h>
-#include <asm/gpio.h>
-#include <asm/arch/iomux-mx53.h>
-#include <linux/fb.h>
-#include <ipu_pixfmt.h>
-
-#define MX53LOCO_LCD_POWER		IMX_GPIO_NR(3, 24)
-
-static struct fb_videomode const claa_wvga = {
-	.name		= "CLAA07LC0ACW",
-	.refresh	= 57,
-	.xres		= 800,
-	.yres		= 480,
-	.pixclock	= 37037,
-	.left_margin	= 40,
-	.right_margin	= 60,
-	.upper_margin	= 10,
-	.lower_margin	= 10,
-	.hsync_len	= 20,
-	.vsync_len	= 10,
-	.sync		= 0,
-	.vmode		= FB_VMODE_NONINTERLACED
-};
-
-static struct fb_videomode const seiko_wvga = {
-	.name		= "Seiko-43WVF1G",
-	.refresh	= 60,
-	.xres		= 800,
-	.yres		= 480,
-	.pixclock	= 29851, /* picosecond (33.5 MHz) */
-	.left_margin	= 89,
-	.right_margin	= 164,
-	.upper_margin	= 23,
-	.lower_margin	= 10,
-	.hsync_len	= 10,
-	.vsync_len	= 10,
-	.sync		= 0,
-};
-
-void setup_iomux_lcd(void)
-{
-	static const iomux_v3_cfg_t lcd_pads[] = {
-		MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK,
-		MX53_PAD_DI0_PIN15__IPU_DI0_PIN15,
-		MX53_PAD_DI0_PIN2__IPU_DI0_PIN2,
-		MX53_PAD_DI0_PIN3__IPU_DI0_PIN3,
-		MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0,
-		MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1,
-		MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2,
-		MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3,
-		MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4,
-		MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5,
-		MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6,
-		MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7,
-		MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8,
-		MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9,
-		MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10,
-		MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11,
-		MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12,
-		MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13,
-		MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14,
-		MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15,
-		MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16,
-		MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17,
-		MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18,
-		MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19,
-		MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20,
-		MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21,
-		MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22,
-		MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23,
-	};
-
-	imx_iomux_v3_setup_multiple_pads(lcd_pads, ARRAY_SIZE(lcd_pads));
-
-	/* Turn on GPIO backlight */
-	imx_iomux_v3_setup_pad(MX53_PAD_EIM_D24__GPIO3_24);
-	gpio_direction_output(MX53LOCO_LCD_POWER, 1);
-
-	/* Turn on display contrast */
-	imx_iomux_v3_setup_pad(MX53_PAD_GPIO_1__GPIO1_1);
-	gpio_direction_output(IMX_GPIO_NR(1, 1), 1);
-}
-
-int board_video_skip(void)
-{
-	int ret;
-	char const *e = env_get("panel");
-
-	if (e) {
-		if (strcmp(e, "seiko") == 0) {
-			ret = ipuv3_fb_init(&seiko_wvga, 0, IPU_PIX_FMT_RGB24);
-			if (ret)
-				printf("Seiko cannot be configured: %d\n", ret);
-			return ret;
-		}
-	}
-
-	/*
-	 * 'panel' env variable not found or has different value than 'seiko'
-	 *  Defaulting to claa lcd.
-	 */
-	ret = ipuv3_fb_init(&claa_wvga, 0, IPU_PIX_FMT_RGB565);
-	if (ret)
-		printf("CLAA cannot be configured: %d\n", ret);
-	return ret;
-}
-- 
2.34.1