[PATCH 01/10] arch: arm: dts: fsl-ls1088a.dtsi: add an 'soc' node

Ioana Ciornei ioana.ciornei at nxp.com
Wed Mar 15 12:04:09 CET 2023


The u-boot dts for these boards do not have an soc node, unlike its
Linux counterpart. This patch just adds the soc node as seen in Linux,
the next patches will move some nodes under it.

Signed-off-by: Ioana Ciornei <ioana.ciornei at nxp.com>
---
 arch/arm/dts/fsl-ls1088a.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm/dts/fsl-ls1088a.dtsi b/arch/arm/dts/fsl-ls1088a.dtsi
index 9b7c54b260e2..36ec0ff51f2a 100644
--- a/arch/arm/dts/fsl-ls1088a.dtsi
+++ b/arch/arm/dts/fsl-ls1088a.dtsi
@@ -35,6 +35,15 @@
 			     <1 10 0x8>; /* Hypervisor PPI, active-low */
 	};
 
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		dma-ranges = <0x0 0x0 0x0 0x0 0x10000 0x00000000>;
+
+	};
+
 	i2c0: i2c at 2000000 {
 		compatible = "fsl,vf610-i2c";
 		#address-cells = <1>;
-- 
2.25.1



More information about the U-Boot mailing list