[PATCH] arm: kirkwood: pogo v4: Use a more common format for stdout-path

[Tony Dinh]

The mainline Pogo V4 DTS uses a stdout-path format that is not
recognizable by u-boot. Change it to a commonly used format.

Note that this patch removes the previous workaround for this board
as discussed here:
https://lists.denx.de/pipermail/u-boot/2023-February/508936.html

Signed-off-by: Tony Dinh <mibodhi at gmail.com>
---

 arch/arm/dts/kirkwood-pogoplug-series-4-u-boot.dtsi | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/arch/arm/dts/kirkwood-pogoplug-series-4-u-boot.dtsi b/arch/arm/dts/kirkwood-pogoplug-series-4-u-boot.dtsi
index f9e127234c..9bb97c6b6b 100644
--- a/arch/arm/dts/kirkwood-pogoplug-series-4-u-boot.dtsi
+++ b/arch/arm/dts/kirkwood-pogoplug-series-4-u-boot.dtsi
@@ -1,7 +1,10 @@
 // SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright (C) 2023 Tony Dinh <mibodhi at gmail.com>
- */
-&uart0 {
-	u-boot,dm-pre-reloc;
+*/
+
+/ {
+	chosen {
+		stdout-path = &uart0;
+	};
 };
-- 
2.30.2