[PATCH v1 5/5] configs: starfive: Enable ethernet configuration for StarFive VisionFive 2

Yanhong Wang yanhong.wang at starfivetech.com
Fri Mar 17 02:05:36 CET 2023


Enable DWC_ETH_QOS and PHY_MOTORCOMM configuration to support ethernet
function for StarFive VisionFive 2 board.

Signed-off-by: Yanhong Wang <yanhong.wang at starfivetech.com>
---
 configs/starfive_visionfive2_defconfig | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/configs/starfive_visionfive2_defconfig b/configs/starfive_visionfive2_defconfig
index 550d0ff3ab..18f0d8fd27 100644
--- a/configs/starfive_visionfive2_defconfig
+++ b/configs/starfive_visionfive2_defconfig
@@ -52,6 +52,9 @@ CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_CMD_MEMINFO=y
 CONFIG_CMD_TFTPPUT=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_REGMAP=y
+CONFIG_SYSCON=y
 CONFIG_SPL_CLK_COMPOSITE_CCF=y
 CONFIG_CLK_COMPOSITE_CCF=y
 CONFIG_SPL_CLK_JH7110=y
@@ -65,6 +68,15 @@ CONFIG_SPI_FLASH_EON=y
 CONFIG_SPI_FLASH_GIGADEVICE=y
 CONFIG_SPI_FLASH_ISSI=y
 CONFIG_SPI_FLASH_MACRONIX=y
+CONFIG_PHY_MOTORCOMM=y
+# CONFIG_PHY_MSCC is not set
+CONFIG_DM_MDIO=y
+CONFIG_DM_ETH_PHY=y
+CONFIG_DWC_ETH_QOS=y
+CONFIG_DWC_ETH_QOS_STARFIVE=y
+CONFIG_RGMII=y
+# CONFIG_MII is not set
+CONFIG_RMII=y
 CONFIG_PINCTRL=y
 CONFIG_PINCONF=y
 CONFIG_SPL_PINCTRL=y
@@ -72,6 +84,7 @@ CONFIG_SPL_PINCONF=y
 CONFIG_SPL_PINCTRL_STARFIVE=y
 CONFIG_SPL_PINCTRL_STARFIVE_JH7110=y
 CONFIG_PINCTRL_STARFIVE=y
+# CONFIG_POWER is not set
 # CONFIG_RAM_SIFIVE is not set
 CONFIG_SYS_NS16550=y
 CONFIG_CADENCE_QSPI=y
-- 
2.17.1



More information about the U-Boot mailing list