[PATCH 21/33] doc: boards: amlogic: update documentation for P201

[Christian Hewitt]

Improve documentation. Notably we can now support U-Boot install to
the internal eMMC storage in addition to SD cards.

Signed-off-by: Christian Hewitt <christianshewitt at gmail.com>
---
 doc/board/amlogic/p201.rst | 87 +++++++++++++++++++++++---------------
 1 file changed, 53 insertions(+), 34 deletions(-)

diff --git a/doc/board/amlogic/p201.rst b/doc/board/amlogic/p201.rst
index 2cd236582a..b3dce4204e 100644
--- a/doc/board/amlogic/p201.rst
+++ b/doc/board/amlogic/p201.rst
@@ -1,25 +1,24 @@
 .. SPDX-License-Identifier: GPL-2.0+
 
-U-Boot for Amlogic P201
-=======================
+U-Boot for Amlogic P201 (S905)
+==============================
 
-P201 is a reference board manufactured by Amlogic with the following
-specifications:
+P201 is a reference board manufactured by Amlogic with the following specifications:
 
  - Amlogic S905 ARM Cortex-A53 quad-core SoC @ 1.5GHz
  - ARM Mali 450 GPU
  - 2GB DDR3 SDRAM
  - 10/100 Ethernet
  - HDMI 2.0 4K/60Hz display
- - 2 x USB 2.0 Host
+ - 2x USB 2.0 Host
  - eMMC, microSD
  - Infrared receiver
  - SDIO WiFi Module
- - CVBS+Stereo Audio Jack
+ - CVBS + Stereo Audio Jack
 
 Schematics are available from Amlogic on demand.
 
-U-Boot compilation
+U-Boot Compilation
 ------------------
 
 .. code-block:: bash
@@ -28,14 +27,20 @@ U-Boot compilation
     $ make p201_defconfig
     $ make
 
-Image creation
---------------
+U-Boot Signing with Pre-Built FIP repo
+--------------------------------------
 
-For simplified usage, pleaser refer to :doc:`pre-generated-fip` with codename `p201`
+.. code-block:: bash
+    $ git clone https://github.com/LibreELEC/amlogic-boot-fip --depth=1
+    $ cd amlogic-boot-fip
+    $ mkdir my-output-dir
+    $ ./build-fip.sh p201 /path/to/u-boot/u-boot.bin my-output-dir
+
+U-Boot Manual Signing
+---------------------
 
-Amlogic doesn't provide sources for the firmware and for tools needed
-to create the bootloader image, so it is necessary to obtain them from
-the git tree published by the board vendor:
+Amlogic does not provide sources for the firmware and tools needed to create a bootloader
+image but sources have been shared by Linux development contractor, Baylibre:
 
 .. code-block:: bash
 
@@ -63,37 +68,51 @@ Go back to mainline U-boot source tree then :
     $ cp $FIPDIR/gxb/bl301.bin fip/
     $ cp $FIPDIR/gxb/bl31.img fip/
     $ cp u-boot.bin fip/bl33.bin
+    $ wget https://github.com/LibreELEC/amlogic-boot-fip/raw/master/nanopi-k2/bl1.bin.hardkernel fip/bl1.bin.hardkernel
+    $ chmod +x fip/bl1.bin.hardkernel
+    $ wget https://github.com/LibreELEC/amlogic-boot-fip/raw/master/nanopi-k2/aml_chksum fip/aml_chksum
+    $ chmod +x fip/aml_chksum
 
     $ $FIPDIR/blx_fix.sh \
-    	fip/bl30.bin \
-        fip/zero_tmp \
-        fip/bl30_zero.bin \
-        fip/bl301.bin \
-        fip/bl301_zero.bin \
-        fip/bl30_new.bin \
-        bl30
+              fip/bl30.bin \
+              fip/zero_tmp \
+              fip/bl30_zero.bin \
+              fip/bl301.bin \
+              fip/bl301_zero.bin \
+              fip/bl30_new.bin \
+              bl30
 
     $ python $FIPDIR/acs_tool.pyc fip/bl2.bin fip/bl2_acs.bin fip/acs.bin 0
 
     $ $FIPDIR/blx_fix.sh \
-        fip/bl2_acs.bin \
-        fip/zero_tmp \
-        fip/bl2_zero.bin \
-        fip/bl21.bin \
-        fip/bl21_zero.bin \
-        fip/bl2_new.bin \
-        bl2
-
-    $ $FIPDIR/fip_create --bl30 fip/bl30_new.bin --bl31 fip/bl31.img --bl33 fip/bl33.bin fip/fip.bin
+              fip/bl2_acs.bin \
+              fip/zero_tmp \
+              fip/bl2_zero.bin \
+              fip/bl21.bin \
+              fip/bl21_zero.bin \
+              fip/bl2_new.bin \
+              bl2
+
+    $ $FIPDIR/fip_create --bl30 fip/bl30_new.bin \
+                         --bl31 fip/bl31.img \
+                         --bl33 fip/bl33.bin \
+                         fip/fip.bin
 
     $ cat fip/bl2_new.bin fip/fip.bin >fip/boot_new.bin
 
-    $ $FIPDIR/gxb/aml_encrypt_gxb --bootsig --input fip/boot_new.bin --output fip/u-boot.bin
+    $ $FIPDIR/gxb/aml_encrypt_gxb --bootsig \
+                                  --input fip/boot_new.bin \
+                                  --output fip/u-boot.bin
 
-and then write the image to SD with:
+Then write U-Boot to SD or eMMC with:
 
 .. code-block:: bash
 
-    $ DEV=/dev/your_sd_device
-    $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
-    $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444
+    $ DEV=/dev/boot_device
+    $ dd if=fip/u-boot.bin of=fip/u-boot.bin.gxbb bs=512 conv=fsync
+    $ dd if=fip/u-boot.bin of=fip/u-boot.bin.gxbb bs=512 seek=9 skip=8 count=87 conv=fsync,notrunc
+    $ dd if=/dev/zero of=fip/u-boot.bin.gxbb bs=512 seek=8 count=1 conv=fsync,notrunc
+    $ dd if=bl1.bin.hardkernel of=fip/u-boot.bin.gxbb bs=512 seek=2 skip=2 count=1 conv=fsync,notrunc
+    $ ./aml_chksum fip/u-boot.bin.gxbb
+    $ dd if=fip/u-boot.gxbb of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
+    $ dd if=fip/u-boot.gxbb of=$DEV conv=fsync,notrunc bs=1 count=440
-- 
2.34.1