[PATCH 30/33] doc: boards: amlogic: add documentation for BananaPi CM4IO
Christian Hewitt
christianshewitt at gmail.com
Mon Mar 20 12:46:06 CET 2023
Add build instructions for the BananaPi BPI-CM4IO carrier board with
BPI-CM4 module.
Signed-off-by: Christian Hewitt <christianshewitt at gmail.com>
---
board/amlogic/u200/MAINTAINERS | 1 -
board/amlogic/w400/MAINTAINERS | 2 +
doc/board/amlogic/bananapi-cm4io.rst | 152 +++++++++++++++++++++++++++
doc/board/amlogic/index.rst | 1 +
4 files changed, 155 insertions(+), 1 deletion(-)
create mode 100644 doc/board/amlogic/bananapi-cm4io.rst
diff --git a/board/amlogic/u200/MAINTAINERS b/board/amlogic/u200/MAINTAINERS
index 7535e489d1..47cec234a1 100644
--- a/board/amlogic/u200/MAINTAINERS
+++ b/board/amlogic/u200/MAINTAINERS
@@ -4,7 +4,6 @@ S: Maintained
L: u-boot-amlogic at groups.io
F: board/amlogic/u200/
F: configs/u200_defconfig
-F: configs/bananapi-cm4-cm4io_defconfig
F: configs/bananapi-m5_defconfig
F: configs/radxa-zero_defconfig
F: doc/board/amlogic/u200.rst
diff --git a/board/amlogic/w400/MAINTAINERS b/board/amlogic/w400/MAINTAINERS
index 96ccda2001..26a4c2c587 100644
--- a/board/amlogic/w400/MAINTAINERS
+++ b/board/amlogic/w400/MAINTAINERS
@@ -3,4 +3,6 @@ M: Neil Armstrong <neil.armstrong at linaro.org>
S: Maintained
L: u-boot-amlogic at groups.io
F: board/amlogic/w400/
+F: configs/bananapi-cm4-cm4io_defconfig
F: doc/board/amlogic/w400.rst
+F: doc/board/amlogic/bananapi-cm4io.rst
diff --git a/doc/board/amlogic/bananapi-cm4io.rst b/doc/board/amlogic/bananapi-cm4io.rst
new file mode 100644
index 0000000000..aabe2ef197
--- /dev/null
+++ b/doc/board/amlogic/bananapi-cm4io.rst
@@ -0,0 +1,152 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+U-Boot for BananaPi CM4 with CM4IO (A311D)
+==========================================
+
+BPI-CM4 is a system-on-module board manufactured by Sinovoip. It follows the Raspberry Pi
+CM4 interface specification but with a single HDMI port and a single DSI output:
+
+ - Amlogic A311D Arm Cortex-A53 dual-core + Cortex-A73 quad-core SoC
+ - 4GB DDR4 SDRAM
+ - 16GB eMMC
+ - NPU
+ - HDMI 2.1 display
+ - Gigabit Ethernet
+ - RTL8822CS WiFi (a/b/g/n/ac) + BT 5.0
+
+BPI-CM4IO is a carrier board for the BPI-CM4 module with the following specification:
+
+ - CM4 interface
+ - HDMI interface
+ - MIPI CSI interface
+ - MIPI DSI interface
+ - Ethernet interface
+ - PCIe interface
+ - SD (micro)
+ - SIM (micro)
+ - 26-pin GPIO
+ - UART serial
+ - 1x USB-C (power)
+ - 2x USB 2.0
+
+Schematics are available from the manufacturer: https://wiki.banana-pi.org/Banana_Pi_BPI-CM4
+
+U-Boot Compilation
+------------------
+
+.. code-block:: bash
+
+ $ export CROSS_COMPILE=aarch64-none-elf-
+ $ make bananapi-cm4io_defconfig
+ $ make
+
+U-Boot Signing with Pre-Built FIP repo
+--------------------------------------
+
+.. code-block:: bash
+ $ git clone https://github.com/LibreELEC/amlogic-boot-fip --depth=1
+ $ cd amlogic-boot-fip
+ $ mkdir my-output-dir
+ $ ./build-fip.sh bananapi-cm4io /path/to/u-boot/u-boot.bin my-output-dir
+
+U-Boot Manual Signing
+---------------------
+
+Amlogic does not provide sources for the firmware and tools needed to create a bootloader
+image so it is necessary to obtain binaries from sources published by the board vendor:
+
+.. code-block:: bash
+
+ $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
+ $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
+ $ tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
+ $ tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
+ $ export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH
+
+ $ DIR=bananapi-cm4io
+ $ git clone --depth 1 https://github.com/Dangku/amlogic-u-boot.git -b khadas-g12b-v2015.01-m2s $DIR
+
+ $ cd $DIR
+ $ make bananapi_cm4_defconfig
+ $ make
+ $ export UBDIR=$PWD
+
+Go back to the mainline U-Boot source tree then:
+
+.. code-block:: bash
+
+ $ mkdir fip
+
+ $ wget https://github.com/BayLibre/u-boot/releases/download/v2017.11-libretech-cc/blx_fix_g12a.sh -O fip/blx_fix.sh
+ $ cp $UBDIR/build/scp_task/bl301.bin fip/
+ $ cp $UBDIR/build/board/bananapi/bananpi_cm4/firmware/acs.bin fip/
+ $ cp $UBDIR/fip/g12a/bl2.bin fip/
+ $ cp $UBDIR/fip/g12a/bl30.bin fip/
+ $ cp $UBDIR/fip/g12a/bl31.img fip/
+ $ cp $UBDIR/fip/g12a/ddr3_1d.fw fip/
+ $ cp $UBDIR/fip/g12a/ddr4_1d.fw fip/
+ $ cp $UBDIR/fip/g12a/ddr4_2d.fw fip/
+ $ cp $UBDIR/fip/g12a/diag_lpddr4.fw fip/
+ $ cp $UBDIR/fip/g12a/lpddr3_1d.fw fip/
+ $ cp $UBDIR/fip/g12a/lpddr4_1d.fw fip/
+ $ cp $UBDIR/fip/g12a/lpddr4_2d.fw fip/
+ $ cp $UBDIR/fip/g12a/piei.fw fip/
+ $ cp $UBDIR/fip/g12a/aml_ddr.fw fip/
+ $ cp u-boot.bin fip/bl33.bin
+
+ $ sh fip/blx_fix.sh \
+ fip/bl30.bin \
+ fip/zero_tmp \
+ fip/bl30_zero.bin \
+ fip/bl301.bin \
+ fip/bl301_zero.bin \
+ fip/bl30_new.bin \
+ bl30
+
+ $ sh fip/blx_fix.sh \
+ fip/bl2.bin \
+ fip/zero_tmp \
+ fip/bl2_zero.bin \
+ fip/acs.bin \
+ fip/bl21_zero.bin \
+ fip/bl2_new.bin \
+ bl2
+
+ $ $UBDIR/fip/g12b/aml_encrypt_g12b --bl30sig --input fip/bl30_new.bin \
+ --output fip/bl30_new.bin.g12a.enc \
+ --level v3
+ $ $UBDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl30_new.bin.g12a.enc \
+ --output fip/bl30_new.bin.enc \
+ --level v3 --type bl30
+ $ $UBDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl31.img \
+ --output fip/bl31.img.enc \
+ --level v3 --type bl31
+ $ $UBDIR/fip/g12b/aml_encrypt_g12b --bl3sig --input fip/bl33.bin --compress lz4 \
+ --output fip/bl33.bin.enc \
+ --level v3 --type bl33 --compress lz4
+ $ $UBDIR/fip/g12b/aml_encrypt_g12b --bl2sig --input fip/bl2_new.bin \
+ --output fip/bl2.n.bin.sig
+ $ $UBDIR/fip/g12b/aml_encrypt_g12b --bootmk \
+ --output fip/u-boot.bin \
+ --bl2 fip/bl2.n.bin.sig \
+ --bl30 fip/bl30_new.bin.enc \
+ --bl31 fip/bl31.img.enc \
+ --bl33 fip/bl33.bin.enc \
+ --ddrfw1 fip/ddr4_1d.fw \
+ --ddrfw2 fip/ddr4_2d.fw \
+ --ddrfw3 fip/ddr3_1d.fw \
+ --ddrfw4 fip/piei.fw \
+ --ddrfw5 fip/lpddr4_1d.fw \
+ --ddrfw6 fip/lpddr4_2d.fw \
+ --ddrfw7 fip/diag_lpddr4.fw \
+ --ddrfw8 fip/aml_ddr.fw \
+ --ddrfw9 fip/lpddr3_1d.fw \
+ --level v3
+
+Then write the image to SD or eMMC with:
+
+.. code-block:: bash
+
+ $ DEV=/dev/boot_device
+ $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
+ $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=440
diff --git a/doc/board/amlogic/index.rst b/doc/board/amlogic/index.rst
index 3eb1cf46e0..e3ed1158df 100644
--- a/doc/board/amlogic/index.rst
+++ b/doc/board/amlogic/index.rst
@@ -85,6 +85,7 @@ Board Documentation
.. toctree::
:maxdepth: 1
+ bananapi-cm4io
beelink-gtking
beelink-gtkingpro
jethub-j80
--
2.34.1
More information about the U-Boot
mailing list