[PATCH 1/3] clk: scmi: Add Kconfig option for SPL
Kever Yang
kever.yang at rock-chips.com
Tue Mar 21 04:11:51 CET 2023
On 2023/3/18 03:16, Jonas Karlman wrote:
> Building U-Boot SPL with CLK_SCMI and SCMI_FIRMWARE Kconfig options
> enabled and SPL_FIRMWARE disabled result in the following error.
>
> drivers/clk/clk_scmi.o: in function `scmi_clk_gate':
> drivers/clk/clk_scmi.c:84: undefined reference to `devm_scmi_process_msg'
> drivers/clk/clk_scmi.c:88: undefined reference to `scmi_to_linux_errno'
> drivers/clk/clk_scmi.o: in function `scmi_clk_get_rate':
> drivers/clk/clk_scmi.c:113: undefined reference to `devm_scmi_process_msg'
> drivers/clk/clk_scmi.c:117: undefined reference to `scmi_to_linux_errno'
> drivers/clk/clk_scmi.o: in function `scmi_clk_set_rate':
> drivers/clk/clk_scmi.c:139: undefined reference to `devm_scmi_process_msg'
> drivers/clk/clk_scmi.c:143: undefined reference to `scmi_to_linux_errno'
> drivers/clk/clk_scmi.o: in function `scmi_clk_probe':
> drivers/clk/clk_scmi.c:157: undefined reference to `devm_scmi_of_get_channel'
> make[1]: *** [scripts/Makefile.spl:527: spl/u-boot-spl] Error 1
> make: *** [Makefile:2043: spl/u-boot-spl] Error 2
>
> Add Kconfig option so that CLK_SCMI can be disabled in SPL to fix this.
>
> Signed-off-by: Jonas Karlman <jonas at kwiboo.se>
Reviewed-by: Kever Yang <kever.yang at rock-chips.com>
Thanks,
- Kever
> ---
> drivers/clk/Kconfig | 8 ++++++++
> drivers/clk/Makefile | 2 +-
> drivers/firmware/scmi/scmi_agent-uclass.c | 2 +-
> 3 files changed, 10 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
> index 09aa97ee8c0e..458dad9e844b 100644
> --- a/drivers/clk/Kconfig
> +++ b/drivers/clk/Kconfig
> @@ -166,6 +166,14 @@ config CLK_SCMI
> by a SCMI agent based on SCMI clock protocol communication
> with a SCMI server.
>
> +config SPL_CLK_SCMI
> + bool "Enable SCMI clock driver in SPL"
> + depends on SCMI_FIRMWARE && SPL_FIRMWARE
> + help
> + Enable this option if you want to support clock devices exposed
> + by a SCMI agent based on SCMI clock protocol communication
> + with a SCMI server in SPL.
> +
> config CLK_HSDK
> bool "Enable cgu clock driver for HSDK boards"
> depends on CLK && TARGET_HSDK
> diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
> index c274cda77c6a..c1347774b58c 100644
> --- a/drivers/clk/Makefile
> +++ b/drivers/clk/Makefile
> @@ -39,7 +39,7 @@ obj-$(CONFIG_CLK_MVEBU) += mvebu/
> obj-$(CONFIG_CLK_OCTEON) += clk_octeon.o
> obj-$(CONFIG_CLK_OWL) += owl/
> obj-$(CONFIG_CLK_RENESAS) += renesas/
> -obj-$(CONFIG_CLK_SCMI) += clk_scmi.o
> +obj-$(CONFIG_$(SPL_TPL_)CLK_SCMI) += clk_scmi.o
> obj-$(CONFIG_CLK_SIFIVE) += sifive/
> obj-$(CONFIG_CLK_UNIPHIER) += uniphier/
> obj-$(CONFIG_CLK_VERSACLOCK) += clk_versaclock.o
> diff --git a/drivers/firmware/scmi/scmi_agent-uclass.c b/drivers/firmware/scmi/scmi_agent-uclass.c
> index 9a32678617d7..54d563d929b8 100644
> --- a/drivers/firmware/scmi/scmi_agent-uclass.c
> +++ b/drivers/firmware/scmi/scmi_agent-uclass.c
> @@ -75,7 +75,7 @@ static int scmi_bind_protocols(struct udevice *dev)
> name = ofnode_get_name(node);
> switch (protocol_id) {
> case SCMI_PROTOCOL_ID_CLOCK:
> - if (IS_ENABLED(CONFIG_CLK_SCMI))
> + if (CONFIG_IS_ENABLED(CLK_SCMI))
> drv = DM_DRIVER_GET(scmi_clock);
> break;
> case SCMI_PROTOCOL_ID_RESET_DOMAIN:
More information about the U-Boot
mailing list