[PATCH] imx6sx-udoo-neo-basic: Introduce the u-boot.dtsi

[Fabio Estevam]

From: Fabio Estevam <festevam at denx.de>

After the conversion to DM_SERIAL in commit 01f372d8d62b ("udoo_neo:
Select DM_SERIAL and drop iomux board level init") the SPL log is gone
and the U-Boot proper log becomes incomplete:

Core:  80 devices, 18 uclasses, devicetree: separate
MMC:   FSL_SDHC: 1, FSL_SDHC: 2
Loading Environment from MMC... OK
In:    serial at 2020000
Out:   serial at 2020000
Err:   serial at 2020000
Net:   eth0: ethernet at 2188000
Hit any key to stop autoboot:  0  

Introduce the u-boot.dtsi file that passes the u-boot,dm-pre-reloc
properties to the relevant nodes so that UART can be used early in SPL.

With this change, the complete SPL and U-Boot messages are seen again. 

Signed-off-by: Fabio Estevam <festevam at denx.de>
---
 arch/arm/dts/imx6sx-udoo-neo-basic-u-boot.dtsi | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)
 create mode 100644 arch/arm/dts/imx6sx-udoo-neo-basic-u-boot.dtsi

diff --git a/arch/arm/dts/imx6sx-udoo-neo-basic-u-boot.dtsi b/arch/arm/dts/imx6sx-udoo-neo-basic-u-boot.dtsi
new file mode 100644
index 000000000000..cb9e83fde6b7
--- /dev/null
+++ b/arch/arm/dts/imx6sx-udoo-neo-basic-u-boot.dtsi
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+&soc {
+	u-boot,dm-pre-reloc;
+};
+
+&aips1 {
+	u-boot,dm-pre-reloc;
+};
+
+&pinctrl_uart1 {
+	u-boot,dm-pre-reloc;
+};
+
+&uart1 {
+	u-boot,dm-pre-reloc;
+};
-- 
2.34.1