[PATCH 6/7] serial: msm_geni: Use upstream Linux bindings

Konrad Dybcio konrad.dybcio at linaro.org
Fri Mar 24 10:35:43 CET 2023



On 24.03.2023 07:13, Sumit Garg wrote:
> On Fri, 24 Mar 2023 at 06:10, Konrad Dybcio <konrad.dybcio at linaro.org> wrote:
>>
>> The name "se" is used in upstream Linux device trees and has been for
>> ages, long before this U-Boot-ism was introduced. Same goes for the
>> existing compatible. Get rid of that.
>>
>> Signed-off-by: Konrad Dybcio <konrad.dybcio at linaro.org>
>> ---
>>
>>  arch/arm/dts/sdm845.dtsi         | 4 ++--
>>  drivers/serial/serial_msm_geni.c | 6 ++++--
>>  2 files changed, 6 insertions(+), 4 deletions(-)
>>
>> diff --git a/arch/arm/dts/sdm845.dtsi b/arch/arm/dts/sdm845.dtsi
>> index 607af277f8be..92bdc82177d6 100644
>> --- a/arch/arm/dts/sdm845.dtsi
>> +++ b/arch/arm/dts/sdm845.dtsi
>> @@ -52,10 +52,10 @@
>>                 };
>>
>>                 debug_uart: serial at a84000 {
>> -                       compatible = "qcom,msm-geni-uart";
>> +                       compatible = "qcom,geni-debug-uart";
> 
> With this the custom u-boot DT bindings [1] becomes redundant, we
> should remove that as well.
> 
> [1] doc/device-tree-bindings/serial/msm-geni-serial.txt
Ack!

Konrad
> 
> -Sumit
> 
>>                         reg = <0xa84000 0x4000>;
>>                         reg-names = "se_phys";
>> -                       clock-names = "se-clk";
>> +                       clock-names = "se";
>>                         clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
>>                         pinctrl-names = "default";
>>                         pinctrl-0 = <&qup_uart9>;
>> diff --git a/drivers/serial/serial_msm_geni.c b/drivers/serial/serial_msm_geni.c
>> index 3943ca43e49e..6c9371c4e69d 100644
>> --- a/drivers/serial/serial_msm_geni.c
>> +++ b/drivers/serial/serial_msm_geni.c
>> @@ -189,7 +189,7 @@ static int geni_serial_set_clock_rate(struct udevice *dev, u64 rate)
>>         struct clk *clk;
>>         int ret;
>>
>> -       clk = devm_clk_get(dev, "se-clk");
>> +       clk = devm_clk_get(dev, "se");
>>         if (!clk)
>>                 return -EINVAL;
>>
>> @@ -554,7 +554,9 @@ static int msm_serial_ofdata_to_platdata(struct udevice *dev)
>>  }
>>
>>  static const struct udevice_id msm_serial_ids[] = {
>> -       {.compatible = "qcom,msm-geni-uart"}, {}};
>> +       { .compatible = "qcom,geni-debug-uart" },
>> +       { }
>> +};
>>
>>  U_BOOT_DRIVER(serial_msm_geni) = {
>>         .name = "serial_msm_geni",
>> --
>> 2.40.0
>>


More information about the U-Boot mailing list