[PATCH v3] i2c: correct I2C deblock logic

[haibo.chen at nxp.com]

From: Haibo Chen <haibo.chen at nxp.com>

Current code use dm_gpio_get_value() to get SDA and SCL value, and the
value depends on whether DTS file config the GPIO_ACTIVE_LOW. In ususal
case for i2c GPIO, DTS need to set GPIO_ACTIVE_LOW for SCL/SDA pins. So
here the logic is not correct.

And we must not use GPIOD_ACTIVE_LOW in client code include the
dm_gpio_set_dir_flags(), it is DTS's responsibility for this flag. So
remove GPIOD_ACTIVE_LOW here.

Fixes: aa54192d4a87 ("dm: i2c: implement gpio-based I2C deblock")
Signed-off-by: Haibo Chen <haibo.chen at nxp.com>
---
 drivers/i2c/i2c-uclass.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/i2c/i2c-uclass.c b/drivers/i2c/i2c-uclass.c
index 8d9a89ed89..8867a560bd 100644
--- a/drivers/i2c/i2c-uclass.c
+++ b/drivers/i2c/i2c-uclass.c
@@ -508,13 +508,13 @@ static void i2c_gpio_set_pin(struct gpio_desc *pin, int bit)
 		dm_gpio_set_dir_flags(pin, GPIOD_IS_IN);
 	else
 		dm_gpio_set_dir_flags(pin, GPIOD_IS_OUT |
-					   GPIOD_ACTIVE_LOW |
 					   GPIOD_IS_OUT_ACTIVE);
 }
 
 static int i2c_gpio_get_pin(struct gpio_desc *pin)
 {
-	return dm_gpio_get_value(pin);
+	/* DTS need config GPIO_ACTIVE_LOW */
+	return !dm_gpio_get_value(pin);
 }
 
 int i2c_deblock_gpio_loop(struct gpio_desc *sda_pin,
-- 
2.34.1