[PATCH 25/30] ide: Use a single local blk_desc for ide_ident()
Simon Glass
sjg at chromium.org
Mon Mar 27 21:07:12 CEST 2023
We only use one member of the ide_dev_desc[] array at a time and it does
not stick around outside ide_probe(). Use a single element instead.
Copy over the missing members of blk_desc at the same, since this was
missing from the previous code.
Signed-off-by: Simon Glass <sjg at chromium.org>
Fixes: 68e6f221ed0 ("block: ide: Fix block read/write with driver model")
---
drivers/block/ide.c | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/drivers/block/ide.c b/drivers/block/ide.c
index b1c897d6a41b..4c2a6a8e5309 100644
--- a/drivers/block/ide.c
+++ b/drivers/block/ide.c
@@ -1005,7 +1005,6 @@ BOOTDEV_HUNTER(ide_bootdev_hunter) = {
static int ide_probe(struct udevice *udev)
{
- struct blk_desc ide_dev_desc[CONFIG_SYS_IDE_MAXDEVICE];
bool bus_ok[CONFIG_SYS_IDE_MAXBUS];
int i, bus;
@@ -1028,7 +1027,7 @@ static int ide_probe(struct udevice *udev)
schedule();
for (i = 0; i < CONFIG_SYS_IDE_MAXDEVICE; i++) {
- struct blk_desc *desc;
+ struct blk_desc *desc, pdesc;
struct udevice *blk;
lbaint_t size;
char name[20];
@@ -1038,16 +1037,16 @@ static int ide_probe(struct udevice *udev)
if (!bus_ok[IDE_BUS(i)])
continue;
- ret = ide_ident(i, &ide_dev_desc[i]);
- dev_print(&ide_dev_desc[i]);
+ ret = ide_ident(i, &pdesc);
+ dev_print(&pdesc);
if (ret)
continue;
sprintf(name, "blk#%d", i);
- blksz = ide_dev_desc[i].blksz;
- size = blksz * ide_dev_desc[i].lba;
+ blksz = pdesc.blksz;
+ size = blksz * pdesc.lba;
/*
* With CDROM, if there is no CD inserted, blksz will
@@ -1066,12 +1065,13 @@ static int ide_probe(struct udevice *udev)
/* fill in device vendor/product/rev strings */
desc = dev_get_uclass_plat(blk);
- strlcpy(desc->vendor, ide_dev_desc[desc->devnum].vendor,
- BLK_VEN_SIZE);
- strlcpy(desc->product, ide_dev_desc[desc->devnum].product,
- BLK_PRD_SIZE);
- strlcpy(desc->revision, ide_dev_desc[desc->devnum].revision,
- BLK_REV_SIZE);
+ strlcpy(desc->vendor, pdesc.vendor, BLK_VEN_SIZE);
+ strlcpy(desc->product, pdesc.product, BLK_PRD_SIZE);
+ strlcpy(desc->revision, pdesc.revision, BLK_REV_SIZE);
+ desc->removable = pdesc.removable;
+ desc->atapi = pdesc.atapi;
+ desc->lba48 = pdesc.lba48;
+ desc->type = pdesc.type;
ret = bootdev_setup_for_dev(udev, "ide_bootdev");
if (ret)
--
2.40.0.348.gf938b09366-goog
More information about the U-Boot
mailing list