[PATCH 16/30] ide: Avoid preprocessor for CONFIG_LBA48
Mattijs Korpershoek
mkorpershoek at baylibre.com
Tue Mar 28 16:18:54 CEST 2023
On mar., mars 28, 2023 at 08:07, Simon Glass <sjg at chromium.org> wrote:
> Use IS_ENABLED() instead for all conditions. Add the 'lba48' flag into
> struct blk_desc always, since it uses very little space. Use a bool so
> the meaning is clearer.
>
> Signed-off-by: Simon Glass <sjg at chromium.org>
> ---
>
> drivers/block/ide.c | 57 ++++++++++++++++-----------------------------
> include/blk.h | 4 +---
> 2 files changed, 21 insertions(+), 40 deletions(-)
>
> diff --git a/drivers/block/ide.c b/drivers/block/ide.c
> index 6c5227a5c0e2..45201333c3c5 100644
> --- a/drivers/block/ide.c
> +++ b/drivers/block/ide.c
> @@ -540,11 +540,9 @@ static void atapi_inquiry(struct blk_desc *dev_desc)
> ((unsigned long) iobuf[5] << 16) +
> ((unsigned long) iobuf[6] << 8) + ((unsigned long) iobuf[7]);
> dev_desc->log2blksz = LOG2(dev_desc->blksz);
> -#ifdef CONFIG_LBA48
> +
> /* ATAPI devices cannot use 48bit addressing (ATA/ATAPI v7) */
> - dev_desc->lba48 = 0;
> -#endif
> - return;
> + dev_desc->lba48 = false;
> }
>
> static void ide_ident(struct blk_desc *dev_desc)
> @@ -645,9 +643,9 @@ static void ide_ident(struct blk_desc *dev_desc)
> ((unsigned long)iop.lba_capacity[0]) |
> ((unsigned long)iop.lba_capacity[1] << 16);
>
> -#ifdef CONFIG_LBA48
> - if (iop.command_set_2 & 0x0400) { /* LBA 48 support */
> - dev_desc->lba48 = 1;
> + if (IS_ENABLED(CONFIG_LBA48) && (iop.command_set_2 & 0x0400)) {
> + /* LBA 48 support */
> + dev_desc->lba48 = true;
> for (int i = 0; i < 4; i++)
> iop.lba48_capacity[i] = be16_to_cpu(iop.lba48_capacity[i]);
> dev_desc->lba =
> @@ -656,9 +654,9 @@ static void ide_ident(struct blk_desc *dev_desc)
> ((unsigned long long)iop.lba48_capacity[2] << 32) |
> ((unsigned long long)iop.lba48_capacity[3] << 48));
> } else {
> - dev_desc->lba48 = 0;
> + dev_desc->lba48 = false;
> }
> -#endif /* CONFIG_LBA48 */
> +
> /* assuming HD */
> dev_desc->type = DEV_TYPE_HARDDISK;
> dev_desc->blksz = ATA_BLOCKSIZE;
> @@ -795,15 +793,13 @@ static ulong ide_read(struct udevice *dev, lbaint_t blknr, lbaint_t blkcnt,
> ulong n = 0;
> unsigned char c;
> unsigned char pwrsave = 0; /* power save */
> + bool lba48 = false;
>
> -#ifdef CONFIG_LBA48
> - unsigned char lba48 = 0;
> -
> - if (blknr & 0x0000fffff0000000ULL) {
> + if (IS_ENABLED(CONFIG_LBA48) && (blknr & 0x0000fffff0000000ULL)) {
> /* more than 28 bits used, use 48bit mode */
> - lba48 = 1;
> + lba48 = true;
> }
> -#endif
> +
> debug("ide_read dev %d start " LBAF ", blocks " LBAF " buffer at %lX\n",
> device, blknr, blkcnt, (ulong) buffer);
>
> @@ -845,8 +841,7 @@ static ulong ide_read(struct udevice *dev, lbaint_t blknr, lbaint_t blkcnt,
> printf("IDE read: device %d not ready\n", device);
> break;
> }
> -#ifdef CONFIG_LBA48
> - if (lba48) {
> + if (IS_ENABLED(CONFIG_LBA48) && lba48) {
> /* write high bits */
> ide_outb(device, ATA_SECT_CNT, 0);
> ide_outb(device, ATA_LBA_LOW, (blknr >> 24) & 0xFF);
> @@ -858,21 +853,17 @@ static ulong ide_read(struct udevice *dev, lbaint_t blknr, lbaint_t blkcnt,
> ide_outb(device, ATA_LBA_HIGH, 0);
> #endif
> }
> -#endif
> ide_outb(device, ATA_SECT_CNT, 1);
> ide_outb(device, ATA_LBA_LOW, (blknr >> 0) & 0xFF);
> ide_outb(device, ATA_LBA_MID, (blknr >> 8) & 0xFF);
> ide_outb(device, ATA_LBA_HIGH, (blknr >> 16) & 0xFF);
>
> -#ifdef CONFIG_LBA48
> - if (lba48) {
> + if (IS_ENABLED(CONFIG_LBA48) && lba48) {
> ide_outb(device, ATA_DEV_HD,
> ATA_LBA | ATA_DEVICE(device));
> ide_outb(device, ATA_COMMAND, ATA_CMD_PIO_READ_EXT);
>
> - } else
> -#endif
> - {
> + } else {
> ide_outb(device, ATA_DEV_HD, ATA_LBA |
> ATA_DEVICE(device) | ((blknr >> 24) & 0xF));
> ide_outb(device, ATA_COMMAND, ATA_CMD_PIO_READ);
> @@ -914,15 +905,12 @@ static ulong ide_write(struct udevice *dev, lbaint_t blknr, lbaint_t blkcnt,
> int device = block_dev->devnum;
> ulong n = 0;
> unsigned char c;
> + bool lba48 = false;
>
> -#ifdef CONFIG_LBA48
> - unsigned char lba48 = 0;
> -
> - if (blknr & 0x0000fffff0000000ULL) {
> + if (IS_ENABLED(CONFIG_LBA48) && (blknr & 0x0000fffff0000000ULL)) {
> /* more than 28 bits used, use 48bit mode */
> - lba48 = 1;
> + lba48 = true;
> }
> -#endif
>
> /* Select device
> */
> @@ -935,8 +923,7 @@ static ulong ide_write(struct udevice *dev, lbaint_t blknr, lbaint_t blkcnt,
> printf("IDE read: device %d not ready\n", device);
> goto WR_OUT;
> }
> -#ifdef CONFIG_LBA48
> - if (lba48) {
> + if (IS_ENABLED(CONFIG_LBA48) && lba48) {
> /* write high bits */
> ide_outb(device, ATA_SECT_CNT, 0);
> ide_outb(device, ATA_LBA_LOW, (blknr >> 24) & 0xFF);
> @@ -948,21 +935,17 @@ static ulong ide_write(struct udevice *dev, lbaint_t blknr, lbaint_t blkcnt,
> ide_outb(device, ATA_LBA_HIGH, 0);
> #endif
> }
> -#endif
> ide_outb(device, ATA_SECT_CNT, 1);
> ide_outb(device, ATA_LBA_LOW, (blknr >> 0) & 0xFF);
> ide_outb(device, ATA_LBA_MID, (blknr >> 8) & 0xFF);
> ide_outb(device, ATA_LBA_HIGH, (blknr >> 16) & 0xFF);
>
> -#ifdef CONFIG_LBA48
> - if (lba48) {
> + if (IS_ENABLED(CONFIG_LBA48) && lba48) {
> ide_outb(device, ATA_DEV_HD,
> ATA_LBA | ATA_DEVICE(device));
> ide_outb(device, ATA_COMMAND, ATA_CMD_PIO_WRITE_EXT);
>
> - } else
> -#endif
> - {
> + } else {
> ide_outb(device, ATA_DEV_HD, ATA_LBA |
> ATA_DEVICE(device) | ((blknr >> 24) & 0xF));
> ide_outb(device, ATA_COMMAND, ATA_CMD_PIO_WRITE);
> diff --git a/include/blk.h b/include/blk.h
> index 871922dcde07..2c9c7985a885 100644
> --- a/include/blk.h
> +++ b/include/blk.h
> @@ -62,10 +62,8 @@ struct blk_desc {
> unsigned char hwpart; /* HW partition, e.g. for eMMC */
> unsigned char type; /* device type */
> unsigned char removable; /* removable device */
> -#ifdef CONFIG_LBA48
> /* device can use 48bit addr (ATA/ATAPI v7) */
> - unsigned char lba48;
> -#endif
> + bool lba48;
nitpick Is there a reason for having dropped this comment?
/* device can use 48bit addr (ATA/ATAPI v7) */
In any case:
Reviewed-by: Mattijs Korpershoek <mkorpershoek at baylibre.com>
> unsigned char atapi; /* Use ATAPI protocol */
> lbaint_t lba; /* number of blocks */
> unsigned long blksz; /* block size */
> --
> 2.40.0.348.gf938b09366-goog
More information about the U-Boot
mailing list