[PATCH 10/30] ide: Correct use of ATAPI

Mattijs Korpershoek mkorpershoek at baylibre.com
Tue Mar 28 16:23:20 CEST 2023


On mar., mars 28, 2023 at 08:06, Simon Glass <sjg at chromium.org> wrote:

> The use of atapi_read() was incorrect dropped. Fix this so that it will
> be used when needed. Use a udevice for the first argument of atapi_read()
> so it is consistent with ide_read().
>
> This requires much of the ATAPI code to be brought out from behind the
> existing #ifdef. It will still be removed by the compiler if it is not
> needed.
>
> Add an atapi flag to struct blk_desc so the information can be retained.
>
> Fixes: 145df842b44 ("dm: ide: Add support for driver-model block devices")
> Fixes: d0075059e4d ("ide: Drop non-DM code for BLK")
>
> Signed-off-by: Simon Glass <sjg at chromium.org>

Reviewed-by: Mattijs Korpershoek <mkorpershoek at baylibre.com>

> ---
>
>  drivers/block/ide.c | 20 +++++++++++++++++---
>  include/blk.h       |  1 +
>  2 files changed, 18 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/block/ide.c b/drivers/block/ide.c
> index fa5f68ffeb01..875192cba163 100644
> --- a/drivers/block/ide.c
> +++ b/drivers/block/ide.c
> @@ -155,7 +155,6 @@ OUT:
>  	*last = '\0';
>  }
>  
> -#ifdef CONFIG_ATAPI
>  /****************************************************************************
>   * ATAPI Support
>   */
> @@ -422,9 +421,10 @@ error:
>  #define ATAPI_READ_BLOCK_SIZE	2048	/* assuming CD part */
>  #define ATAPI_READ_MAX_BLOCK	(ATAPI_READ_MAX_BYTES/ATAPI_READ_BLOCK_SIZE)
>  
> -ulong atapi_read(struct blk_desc *block_dev, lbaint_t blknr, lbaint_t blkcnt,
> +ulong atapi_read(struct udevice *dev, lbaint_t blknr, lbaint_t blkcnt,
>  		 void *buffer)
>  {
> +	struct blk_desc *block_dev = dev_get_uclass_plat(dev);
>  	int device = block_dev->devnum;
>  	ulong n = 0;
>  	unsigned char ccb[12];	/* Command descriptor block */
> @@ -466,6 +466,8 @@ ulong atapi_read(struct blk_desc *block_dev, lbaint_t blknr, lbaint_t blkcnt,
>  	return n;
>  }
>  
> +#ifdef CONFIG_ATAPI
> +
>  static void atapi_inquiry(struct blk_desc *dev_desc)
>  {
>  	unsigned char ccb[12];	/* Command descriptor block */
> @@ -653,6 +655,7 @@ static void ide_ident(struct blk_desc *dev_desc)
>  
>  #ifdef CONFIG_ATAPI
>  	if (is_atapi) {
> +		dev_desc->atapi = true;
>  		atapi_inquiry(dev_desc);
>  		return;
>  	}
> @@ -1010,6 +1013,17 @@ WR_OUT:
>  	return n;
>  }
>  
> +ulong ide_or_atapi_read(struct udevice *dev, lbaint_t blknr, lbaint_t blkcnt,
> +			void *buffer)
> +{
> +	struct blk_desc *desc = dev_get_uclass_plat(dev);
> +
> +	if (IS_ENABLED(CONFIG_ATAPI) && desc->atapi)
> +		return atapi_read(dev, blknr, blkcnt, buffer);
> +
> +	return ide_read(dev, blknr, blkcnt, buffer);
> +}
> +
>  static int ide_blk_probe(struct udevice *udev)
>  {
>  	struct blk_desc *desc = dev_get_uclass_plat(udev);
> @@ -1029,7 +1043,7 @@ static int ide_blk_probe(struct udevice *udev)
>  }
>  
>  static const struct blk_ops ide_blk_ops = {
> -	.read	= ide_read,
> +	.read	= ide_or_atapi_read,
>  	.write	= ide_write,
>  };
>  
> diff --git a/include/blk.h b/include/blk.h
> index 1db203c1baba..871922dcde07 100644
> --- a/include/blk.h
> +++ b/include/blk.h
> @@ -66,6 +66,7 @@ struct blk_desc {
>  	/* device can use 48bit addr (ATA/ATAPI v7) */
>  	unsigned char	lba48;
>  #endif
> +	unsigned char	atapi;		/* Use ATAPI protocol */
>  	lbaint_t	lba;		/* number of blocks */
>  	unsigned long	blksz;		/* block size */
>  	int		log2blksz;	/* for convenience: log2(blksz) */
> -- 
> 2.40.0.348.gf938b09366-goog


More information about the U-Boot mailing list