[PATCH v5 08/17] pinctrl: starfive: Add StarFive JH7110 driver

Yanhong Wang yanhong.wang at starfivetech.com
Wed Mar 29 05:42:15 CEST 2023


From: Kuan Lim Lee <kuanlim.lee at linux.starfivetech.com>

Add pinctrl driver for StarFive JH7110 SoC.

Signed-off-by: Kuan Lim Lee <kuanlim.lee at linux.starfivetech.com>
Signed-off-by: Emil Renner Berthing <kernel at esmil.dk>
Signed-off-by: Jianlong Huang <jianlong.huang at starfivetech.com>
Signed-off-by: Yanhong Wang <yanhong.wang at starfivetech.com>
Tested-by: Conor Dooley <conor.dooley at microchip.com>
---
 drivers/pinctrl/Kconfig                       |   1 +
 drivers/pinctrl/Makefile                      |   1 +
 drivers/pinctrl/starfive/Kconfig              |  28 ++
 drivers/pinctrl/starfive/Makefile             |   6 +
 drivers/pinctrl/starfive/pinctrl-jh7110-aon.c | 113 +++++
 drivers/pinctrl/starfive/pinctrl-jh7110-sys.c | 399 ++++++++++++++++++
 drivers/pinctrl/starfive/pinctrl-starfive.c   | 398 +++++++++++++++++
 drivers/pinctrl/starfive/pinctrl-starfive.h   |  55 +++
 8 files changed, 1001 insertions(+)
 create mode 100644 drivers/pinctrl/starfive/Kconfig
 create mode 100644 drivers/pinctrl/starfive/Makefile
 create mode 100644 drivers/pinctrl/starfive/pinctrl-jh7110-aon.c
 create mode 100644 drivers/pinctrl/starfive/pinctrl-jh7110-sys.c
 create mode 100644 drivers/pinctrl/starfive/pinctrl-starfive.c
 create mode 100644 drivers/pinctrl/starfive/pinctrl-starfive.h

diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index b6ef2acced..75b3ff47a2 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -359,5 +359,6 @@ source "drivers/pinctrl/renesas/Kconfig"
 source "drivers/pinctrl/rockchip/Kconfig"
 source "drivers/pinctrl/sunxi/Kconfig"
 source "drivers/pinctrl/uniphier/Kconfig"
+source "drivers/pinctrl/starfive/Kconfig"
 
 endmenu
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index 3b167d099f..852adee4b4 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -32,3 +32,4 @@ obj-$(CONFIG_PINCTRL_STM32)	+= pinctrl_stm32.o
 obj-$(CONFIG_$(SPL_)PINCTRL_STMFX)	+= pinctrl-stmfx.o
 obj-y				+= broadcom/
 obj-$(CONFIG_PINCTRL_ZYNQMP)	+= pinctrl-zynqmp.o
+obj-$(CONFIG_PINCTRL_STARFIVE)	+= starfive/
diff --git a/drivers/pinctrl/starfive/Kconfig b/drivers/pinctrl/starfive/Kconfig
new file mode 100644
index 0000000000..1b859c863e
--- /dev/null
+++ b/drivers/pinctrl/starfive/Kconfig
@@ -0,0 +1,28 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+config SPL_PINCTRL_STARFIVE
+	bool "Support Pinctrl driver for StarFive SoC in SPL"
+	depends on SPL_PINCTRL_FULL && STARFIVE_JH7110
+	help
+	  Enable support pin control driver for StarFive SoC.
+
+config SPL_PINCTRL_STARFIVE_JH7110
+	bool "Support Pinctrl and GPIO driver for StarFive JH7110 SoC in SPL"
+	depends on  SPL_PINCTRL_STARFIVE
+	help
+	  Enable support pinctrl and gpio driver for StarFive JH7110 in SPL.
+
+config PINCTRL_STARFIVE
+	bool "Pinctrl driver for StarFive SoC"
+	depends on PINCTRL_FULL && STARFIVE_JH7110
+	help
+	  Say yes here to support pin control on the StarFive RISC-V SoC.
+	  This also provides an interface to the GPIO pins not used by other
+	  peripherals supporting inputs, outputs, configuring pull-up/pull-down
+	  and interrupts on input changes.
+
+config PINCTRL_STARFIVE_JH7110
+	bool "Pinctrl and GPIO driver for StarFive JH7110 SoC"
+	depends on  PINCTRL_STARFIVE
+	help
+	  This selects the pinctrl driver for JH7110 starfive.
diff --git a/drivers/pinctrl/starfive/Makefile b/drivers/pinctrl/starfive/Makefile
new file mode 100644
index 0000000000..a4a12069b3
--- /dev/null
+++ b/drivers/pinctrl/starfive/Makefile
@@ -0,0 +1,6 @@
+
+# SPDX-License-Identifier: GPL-2.0
+# Core
+obj-$(CONFIG_$(SPL_TPL_)PINCTRL_STARFIVE) += pinctrl-starfive.o
+# SoC Drivers
+obj-$(CONFIG_$(SPL_TPL_)PINCTRL_STARFIVE_JH7110)	+= pinctrl-jh7110-sys.o pinctrl-jh7110-aon.o
diff --git a/drivers/pinctrl/starfive/pinctrl-jh7110-aon.c b/drivers/pinctrl/starfive/pinctrl-jh7110-aon.c
new file mode 100644
index 0000000000..2d739906e2
--- /dev/null
+++ b/drivers/pinctrl/starfive/pinctrl-jh7110-aon.c
@@ -0,0 +1,113 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Pinctrl / GPIO driver for StarFive JH7110 SoC
+ *
+ * Copyright (C) 2022 StarFive Technology Co., Ltd.
+ *   Author: Lee Kuan Lim <kuanlim.lee at starfivetech.com>
+ *   Author: Jianlong Huang <jianlong.huang at starfivetech.com>
+ */
+
+#include <dm/read.h>
+#include <dm/device_compat.h>
+#include <linux/io.h>
+
+#include <dt-bindings/pinctrl/pinctrl-starfive-jh7110.h>
+#include "pinctrl-starfive.h"
+
+#define JH7110_AON_NGPIO		4
+#define JH7110_AON_GC_BASE		64
+
+/* registers */
+#define JH7110_AON_DOEN		0x0
+#define JH7110_AON_DOUT		0x4
+#define JH7110_AON_GPI			0x8
+#define JH7110_AON_GPIOIN		0x2c
+
+#define JH7110_AON_GPIOEN		0xc
+#define JH7110_AON_GPIOIS		0x10
+#define JH7110_AON_GPIOIC		0x14
+#define JH7110_AON_GPIOIBE		0x18
+#define JH7110_AON_GPIOIEV		0x1c
+#define JH7110_AON_GPIOIE		0x20
+#define JH7110_AON_GPIORIS		0x28
+#define JH7110_AON_GPIOMIS		0x28
+
+#define AON_GPO_PDA_0_5_CFG		0x30
+
+static int jh7110_aon_set_one_pin_mux(struct udevice *dev, unsigned int pin,
+				      unsigned int din, u32 dout,
+				      u32 doen, u32 func)
+{
+	struct starfive_pinctrl_priv *priv = dev_get_priv(dev);
+
+	if (pin < priv->info->ngpios && func == 0)
+		starfive_set_gpiomux(dev, pin, din, dout, doen);
+
+	return 0;
+}
+
+static int jh7110_aon_get_padcfg_base(struct udevice *dev,
+				      unsigned int pin)
+{
+	if (pin < PAD_GMAC0_MDC)
+		return AON_GPO_PDA_0_5_CFG;
+
+	return -1;
+}
+
+static void jh7110_aon_init_hw(struct udevice *dev)
+{
+	struct starfive_pinctrl_priv *priv = dev_get_priv(dev);
+
+	/* mask all GPIO interrupts */
+	writel(0, priv->base + JH7110_AON_GPIOIE);
+	/* clear edge interrupt flags */
+	writel(0, priv->base + JH7110_AON_GPIOIC);
+	writel(0x0f, priv->base + JH7110_AON_GPIOIC);
+	/* enable GPIO interrupts */
+	writel(1, priv->base + JH7110_AON_GPIOEN);
+}
+
+const struct starfive_pinctrl_soc_info jh7110_aon_pinctrl_info = {
+	/* pin conf */
+	.set_one_pinmux = jh7110_aon_set_one_pin_mux,
+	.get_padcfg_base  = jh7110_aon_get_padcfg_base,
+
+	/* gpio dout/doen/din/gpioinput register */
+	.dout_reg_base = JH7110_AON_DOUT,
+	.dout_mask = GENMASK(3, 0),
+	.doen_reg_base = JH7110_AON_DOEN,
+	.doen_mask = GENMASK(2, 0),
+	.gpi_reg_base = JH7110_AON_GPI,
+	.gpi_mask = GENMASK(3, 0),
+	.gpioin_reg_base = JH7110_AON_GPIOIN,
+
+	/* gpio */
+	.gpio_bank_name = "RGPIO",
+	.ngpios = JH7110_AON_NGPIO,
+	.gpio_init_hw = jh7110_aon_init_hw,
+};
+
+static int jh7110_aon_pinctrl_probe(struct udevice *dev)
+{
+	struct starfive_pinctrl_soc_info *info =
+		(struct starfive_pinctrl_soc_info *)dev_get_driver_data(dev);
+
+	return starfive_pinctrl_probe(dev, info);
+}
+
+static const struct udevice_id jh7110_aon_pinctrl_ids[] = {
+	/* JH7110 aon pinctrl */
+	{ .compatible = "starfive,jh7110-aon-pinctrl",
+	  .data = (ulong)&jh7110_aon_pinctrl_info, },
+	{ /* sentinel */ }
+};
+
+U_BOOT_DRIVER(jh7110_aon_pinctrl) = {
+	.name		= "jh7110-aon-pinctrl",
+	.id		= UCLASS_PINCTRL,
+	.of_match	= jh7110_aon_pinctrl_ids,
+	.priv_auto	= sizeof(struct starfive_pinctrl_priv),
+	.ops		= &starfive_pinctrl_ops,
+	.probe		= jh7110_aon_pinctrl_probe,
+};
diff --git a/drivers/pinctrl/starfive/pinctrl-jh7110-sys.c b/drivers/pinctrl/starfive/pinctrl-jh7110-sys.c
new file mode 100644
index 0000000000..dafba65eae
--- /dev/null
+++ b/drivers/pinctrl/starfive/pinctrl-jh7110-sys.c
@@ -0,0 +1,399 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Pinctrl / GPIO driver for StarFive JH7110 SoC
+ *
+ * Copyright (C) 2022 StarFive Technology Co., Ltd.
+ *   Author: Lee Kuan Lim <kuanlim.lee at starfivetech.com>
+ *   Author: Jianlong Huang <jianlong.huang at starfivetech.com>
+ */
+
+#include <dm/read.h>
+#include <dm/device_compat.h>
+#include <linux/io.h>
+
+#include <dt-bindings/pinctrl/pinctrl-starfive-jh7110.h>
+#include "pinctrl-starfive.h"
+
+#define JH7110_SYS_NGPIO		64
+#define JH7110_SYS_GC_BASE		0
+
+/* registers */
+#define JH7110_SYS_DOEN		0x000
+#define JH7110_SYS_DOUT		0x040
+#define JH7110_SYS_GPI			0x080
+#define JH7110_SYS_GPIOIN		0x118
+
+#define JH7110_SYS_GPIOEN		0x0dc
+#define JH7110_SYS_GPIOIS0		0x0e0
+#define JH7110_SYS_GPIOIS1		0x0e4
+#define JH7110_SYS_GPIOIC0		0x0e8
+#define JH7110_SYS_GPIOIC1		0x0ec
+#define JH7110_SYS_GPIOIBE0		0x0f0
+#define JH7110_SYS_GPIOIBE1		0x0f4
+#define JH7110_SYS_GPIOIEV0		0x0f8
+#define JH7110_SYS_GPIOIEV1		0x0fc
+#define JH7110_SYS_GPIOIE0		0x100
+#define JH7110_SYS_GPIOIE1		0x104
+#define JH7110_SYS_GPIORIS0		0x108
+#define JH7110_SYS_GPIORIS1		0x10c
+#define JH7110_SYS_GPIOMIS0		0x110
+#define JH7110_SYS_GPIOMIS1		0x114
+
+#define SYS_GPO_PDA_0_74_CFG		0x120
+#define SYS_GPO_PDA_89_94_CFG		0x284
+
+static const struct starfive_pinctrl_pin jh7110_sys_pins[] = {
+	STARFIVE_PINCTRL(PAD_GPIO0,		"GPIO0"),
+	STARFIVE_PINCTRL(PAD_GPIO1,		"GPIO1"),
+	STARFIVE_PINCTRL(PAD_GPIO2,		"GPIO2"),
+	STARFIVE_PINCTRL(PAD_GPIO3,		"GPIO3"),
+	STARFIVE_PINCTRL(PAD_GPIO4,		"GPIO4"),
+	STARFIVE_PINCTRL(PAD_GPIO5,		"GPIO5"),
+	STARFIVE_PINCTRL(PAD_GPIO6,		"GPIO6"),
+	STARFIVE_PINCTRL(PAD_GPIO7,		"GPIO7"),
+	STARFIVE_PINCTRL(PAD_GPIO8,		"GPIO8"),
+	STARFIVE_PINCTRL(PAD_GPIO9,		"GPIO9"),
+	STARFIVE_PINCTRL(PAD_GPIO10,		"GPIO10"),
+	STARFIVE_PINCTRL(PAD_GPIO11,		"GPIO11"),
+	STARFIVE_PINCTRL(PAD_GPIO12,		"GPIO12"),
+	STARFIVE_PINCTRL(PAD_GPIO13,		"GPIO13"),
+	STARFIVE_PINCTRL(PAD_GPIO14,		"GPIO14"),
+	STARFIVE_PINCTRL(PAD_GPIO15,		"GPIO15"),
+	STARFIVE_PINCTRL(PAD_GPIO16,		"GPIO16"),
+	STARFIVE_PINCTRL(PAD_GPIO17,		"GPIO17"),
+	STARFIVE_PINCTRL(PAD_GPIO18,		"GPIO18"),
+	STARFIVE_PINCTRL(PAD_GPIO19,		"GPIO19"),
+	STARFIVE_PINCTRL(PAD_GPIO20,		"GPIO20"),
+	STARFIVE_PINCTRL(PAD_GPIO21,		"GPIO21"),
+	STARFIVE_PINCTRL(PAD_GPIO22,		"GPIO22"),
+	STARFIVE_PINCTRL(PAD_GPIO23,		"GPIO23"),
+	STARFIVE_PINCTRL(PAD_GPIO24,		"GPIO24"),
+	STARFIVE_PINCTRL(PAD_GPIO25,		"GPIO25"),
+	STARFIVE_PINCTRL(PAD_GPIO26,		"GPIO26"),
+	STARFIVE_PINCTRL(PAD_GPIO27,		"GPIO27"),
+	STARFIVE_PINCTRL(PAD_GPIO28,		"GPIO28"),
+	STARFIVE_PINCTRL(PAD_GPIO29,		"GPIO29"),
+	STARFIVE_PINCTRL(PAD_GPIO30,		"GPIO30"),
+	STARFIVE_PINCTRL(PAD_GPIO31,		"GPIO31"),
+	STARFIVE_PINCTRL(PAD_GPIO32,		"GPIO32"),
+	STARFIVE_PINCTRL(PAD_GPIO33,		"GPIO33"),
+	STARFIVE_PINCTRL(PAD_GPIO34,		"GPIO34"),
+	STARFIVE_PINCTRL(PAD_GPIO35,		"GPIO35"),
+	STARFIVE_PINCTRL(PAD_GPIO36,		"GPIO36"),
+	STARFIVE_PINCTRL(PAD_GPIO37,		"GPIO37"),
+	STARFIVE_PINCTRL(PAD_GPIO38,		"GPIO38"),
+	STARFIVE_PINCTRL(PAD_GPIO39,		"GPIO39"),
+	STARFIVE_PINCTRL(PAD_GPIO40,		"GPIO40"),
+	STARFIVE_PINCTRL(PAD_GPIO41,		"GPIO41"),
+	STARFIVE_PINCTRL(PAD_GPIO42,		"GPIO42"),
+	STARFIVE_PINCTRL(PAD_GPIO43,		"GPIO43"),
+	STARFIVE_PINCTRL(PAD_GPIO44,		"GPIO44"),
+	STARFIVE_PINCTRL(PAD_GPIO45,		"GPIO45"),
+	STARFIVE_PINCTRL(PAD_GPIO46,		"GPIO46"),
+	STARFIVE_PINCTRL(PAD_GPIO47,		"GPIO47"),
+	STARFIVE_PINCTRL(PAD_GPIO48,		"GPIO48"),
+	STARFIVE_PINCTRL(PAD_GPIO49,		"GPIO49"),
+	STARFIVE_PINCTRL(PAD_GPIO50,		"GPIO50"),
+	STARFIVE_PINCTRL(PAD_GPIO51,		"GPIO51"),
+	STARFIVE_PINCTRL(PAD_GPIO52,		"GPIO52"),
+	STARFIVE_PINCTRL(PAD_GPIO53,		"GPIO53"),
+	STARFIVE_PINCTRL(PAD_GPIO54,		"GPIO54"),
+	STARFIVE_PINCTRL(PAD_GPIO55,		"GPIO55"),
+	STARFIVE_PINCTRL(PAD_GPIO56,		"GPIO56"),
+	STARFIVE_PINCTRL(PAD_GPIO57,		"GPIO57"),
+	STARFIVE_PINCTRL(PAD_GPIO58,		"GPIO58"),
+	STARFIVE_PINCTRL(PAD_GPIO59,		"GPIO59"),
+	STARFIVE_PINCTRL(PAD_GPIO60,		"GPIO60"),
+	STARFIVE_PINCTRL(PAD_GPIO61,		"GPIO61"),
+	STARFIVE_PINCTRL(PAD_GPIO62,		"GPIO62"),
+	STARFIVE_PINCTRL(PAD_GPIO63,		"GPIO63"),
+	STARFIVE_PINCTRL(PAD_SD0_CLK,		"SD0_CLK"),
+	STARFIVE_PINCTRL(PAD_SD0_CMD,		"SD0_CMD"),
+	STARFIVE_PINCTRL(PAD_SD0_DATA0,		"SD0_DATA0"),
+	STARFIVE_PINCTRL(PAD_SD0_DATA1,		"SD0_DATA1"),
+	STARFIVE_PINCTRL(PAD_SD0_DATA2,		"SD0_DATA2"),
+	STARFIVE_PINCTRL(PAD_SD0_DATA3,		"SD0_DATA3"),
+	STARFIVE_PINCTRL(PAD_SD0_DATA4,		"SD0_DATA4"),
+	STARFIVE_PINCTRL(PAD_SD0_DATA5,		"SD0_DATA5"),
+	STARFIVE_PINCTRL(PAD_SD0_DATA6,		"SD0_DATA6"),
+	STARFIVE_PINCTRL(PAD_SD0_DATA7,		"SD0_DATA7"),
+	STARFIVE_PINCTRL(PAD_SD0_STRB,		"SD0_STRB"),
+	STARFIVE_PINCTRL(PAD_GMAC1_MDC,		"GMAC1_MDC"),
+	STARFIVE_PINCTRL(PAD_GMAC1_MDIO,	"GMAC1_MDIO"),
+	STARFIVE_PINCTRL(PAD_GMAC1_RXD0,	"GMAC1_RXD0"),
+	STARFIVE_PINCTRL(PAD_GMAC1_RXD1,	"GMAC1_RXD1"),
+	STARFIVE_PINCTRL(PAD_GMAC1_RXD2,	"GMAC1_RXD2"),
+	STARFIVE_PINCTRL(PAD_GMAC1_RXD3,	"GMAC1_RXD3"),
+	STARFIVE_PINCTRL(PAD_GMAC1_RXDV,	"GMAC1_RXDV"),
+	STARFIVE_PINCTRL(PAD_GMAC1_RXC,		"GMAC1_RXC"),
+	STARFIVE_PINCTRL(PAD_GMAC1_TXD0,	"GMAC1_TXD0"),
+	STARFIVE_PINCTRL(PAD_GMAC1_TXD1,	"GMAC1_TXD1"),
+	STARFIVE_PINCTRL(PAD_GMAC1_TXD2,	"GMAC1_TXD2"),
+	STARFIVE_PINCTRL(PAD_GMAC1_TXD3,	"GMAC1_TXD3"),
+	STARFIVE_PINCTRL(PAD_GMAC1_TXEN,	"GMAC1_TXEN"),
+	STARFIVE_PINCTRL(PAD_GMAC1_TXC,		"GMAC1_TXC"),
+	STARFIVE_PINCTRL(PAD_QSPI_SCLK,		"QSPI_SCLK"),
+	STARFIVE_PINCTRL(PAD_QSPI_CS0,		"QSPI_CS0"),
+	STARFIVE_PINCTRL(PAD_QSPI_DATA0,	"QSPI_DATA0"),
+	STARFIVE_PINCTRL(PAD_QSPI_DATA1,	"QSPI_DATA1"),
+	STARFIVE_PINCTRL(PAD_QSPI_DATA2,	"QSPI_DATA2"),
+	STARFIVE_PINCTRL(PAD_QSPI_DATA3,	"QSPI_DATA3"),
+};
+
+struct jh7110_func_sel {
+	u16 offset;
+	u8 shift;
+	u8 max;
+};
+
+static const struct jh7110_func_sel
+	jh7110_sys_func_sel[ARRAY_SIZE(jh7110_sys_pins)] = {
+	[PAD_GMAC1_RXC] = { 0x29c,  0, 1 },
+	[PAD_GPIO10]    = { 0x29c,  2, 3 },
+	[PAD_GPIO11]    = { 0x29c,  5, 3 },
+	[PAD_GPIO12]    = { 0x29c,  8, 3 },
+	[PAD_GPIO13]    = { 0x29c, 11, 3 },
+	[PAD_GPIO14]    = { 0x29c, 14, 3 },
+	[PAD_GPIO15]    = { 0x29c, 17, 3 },
+	[PAD_GPIO16]    = { 0x29c, 20, 3 },
+	[PAD_GPIO17]    = { 0x29c, 23, 3 },
+	[PAD_GPIO18]    = { 0x29c, 26, 3 },
+	[PAD_GPIO19]    = { 0x29c, 29, 3 },
+
+	[PAD_GPIO20]    = { 0x2a0,  0, 3 },
+	[PAD_GPIO21]    = { 0x2a0,  3, 3 },
+	[PAD_GPIO22]    = { 0x2a0,  6, 3 },
+	[PAD_GPIO23]    = { 0x2a0,  9, 3 },
+	[PAD_GPIO24]    = { 0x2a0, 12, 3 },
+	[PAD_GPIO25]    = { 0x2a0, 15, 3 },
+	[PAD_GPIO26]    = { 0x2a0, 18, 3 },
+	[PAD_GPIO27]    = { 0x2a0, 21, 3 },
+	[PAD_GPIO28]    = { 0x2a0, 24, 3 },
+	[PAD_GPIO29]    = { 0x2a0, 27, 3 },
+
+	[PAD_GPIO30]    = { 0x2a4,  0, 3 },
+	[PAD_GPIO31]    = { 0x2a4,  3, 3 },
+	[PAD_GPIO32]    = { 0x2a4,  6, 3 },
+	[PAD_GPIO33]    = { 0x2a4,  9, 3 },
+	[PAD_GPIO34]    = { 0x2a4, 12, 3 },
+	[PAD_GPIO35]    = { 0x2a4, 15, 3 },
+	[PAD_GPIO36]    = { 0x2a4, 17, 3 },
+	[PAD_GPIO37]    = { 0x2a4, 20, 3 },
+	[PAD_GPIO38]    = { 0x2a4, 23, 3 },
+	[PAD_GPIO39]    = { 0x2a4, 26, 3 },
+	[PAD_GPIO40]    = { 0x2a4, 29, 3 },
+
+	[PAD_GPIO41]    = { 0x2a8,  0, 3 },
+	[PAD_GPIO42]    = { 0x2a8,  3, 3 },
+	[PAD_GPIO43]    = { 0x2a8,  6, 3 },
+	[PAD_GPIO44]    = { 0x2a8,  9, 3 },
+	[PAD_GPIO45]    = { 0x2a8, 12, 3 },
+	[PAD_GPIO46]    = { 0x2a8, 15, 3 },
+	[PAD_GPIO47]    = { 0x2a8, 18, 3 },
+	[PAD_GPIO48]    = { 0x2a8, 21, 3 },
+	[PAD_GPIO49]    = { 0x2a8, 24, 3 },
+	[PAD_GPIO50]    = { 0x2a8, 27, 3 },
+	[PAD_GPIO51]    = { 0x2a8, 30, 3 },
+
+	[PAD_GPIO52]    = { 0x2ac,  0, 3 },
+	[PAD_GPIO53]    = { 0x2ac,  2, 3 },
+	[PAD_GPIO54]    = { 0x2ac,  4, 3 },
+	[PAD_GPIO55]    = { 0x2ac,  6, 3 },
+	[PAD_GPIO56]    = { 0x2ac,  9, 3 },
+	[PAD_GPIO57]    = { 0x2ac, 12, 3 },
+	[PAD_GPIO58]    = { 0x2ac, 15, 3 },
+	[PAD_GPIO59]    = { 0x2ac, 18, 3 },
+	[PAD_GPIO60]    = { 0x2ac, 21, 3 },
+	[PAD_GPIO61]    = { 0x2ac, 24, 3 },
+	[PAD_GPIO62]    = { 0x2ac, 27, 3 },
+	[PAD_GPIO63]    = { 0x2ac, 30, 3 },
+
+	[PAD_GPIO6]     = { 0x2b0,  0, 3 },
+	[PAD_GPIO7]     = { 0x2b0,  2, 3 },
+	[PAD_GPIO8]     = { 0x2b0,  5, 3 },
+	[PAD_GPIO9]     = { 0x2b0,  8, 3 },
+};
+
+struct jh7110_vin_group_sel {
+	u16 offset;
+	u8 shift;
+	u8 group;
+};
+
+static const struct jh7110_vin_group_sel
+	jh7110_sys_vin_group_sel[ARRAY_SIZE(jh7110_sys_pins)] = {
+	[PAD_GPIO6]     = { 0x2b4, 21, 0 },
+	[PAD_GPIO7]     = { 0x2b4, 18, 0 },
+	[PAD_GPIO8]     = { 0x2b4, 15, 0 },
+	[PAD_GPIO9]     = { 0x2b0, 11, 0 },
+	[PAD_GPIO10]    = { 0x2b0, 20, 0 },
+	[PAD_GPIO11]    = { 0x2b0, 23, 0 },
+	[PAD_GPIO12]    = { 0x2b0, 26, 0 },
+	[PAD_GPIO13]    = { 0x2b0, 29, 0 },
+	[PAD_GPIO14]    = { 0x2b4,  0, 0 },
+	[PAD_GPIO15]    = { 0x2b4,  3, 0 },
+	[PAD_GPIO16]    = { 0x2b4,  6, 0 },
+	[PAD_GPIO17]    = { 0x2b4,  9, 0 },
+	[PAD_GPIO18]    = { 0x2b4, 12, 0 },
+	[PAD_GPIO19]    = { 0x2b0, 14, 0 },
+	[PAD_GPIO20]    = { 0x2b0, 17, 0 },
+
+	[PAD_GPIO21]    = { 0x2b4, 21, 1 },
+	[PAD_GPIO22]    = { 0x2b4, 18, 1 },
+	[PAD_GPIO23]    = { 0x2b4, 15, 1 },
+	[PAD_GPIO24]    = { 0x2b0, 11, 1 },
+	[PAD_GPIO25]    = { 0x2b0, 20, 1 },
+	[PAD_GPIO26]    = { 0x2b0, 23, 1 },
+	[PAD_GPIO27]    = { 0x2b0, 26, 1 },
+	[PAD_GPIO28]    = { 0x2b0, 29, 1 },
+	[PAD_GPIO29]    = { 0x2b4,  0, 1 },
+	[PAD_GPIO30]    = { 0x2b4,  3, 1 },
+	[PAD_GPIO31]    = { 0x2b4,  6, 1 },
+	[PAD_GPIO32]    = { 0x2b4,  9, 1 },
+	[PAD_GPIO33]    = { 0x2b4, 12, 1 },
+	[PAD_GPIO34]    = { 0x2b0, 14, 1 },
+	[PAD_GPIO35]    = { 0x2b0, 17, 1 },
+
+	[PAD_GPIO36]    = { 0x2b4, 21, 2 },
+	[PAD_GPIO37]    = { 0x2b4, 18, 2 },
+	[PAD_GPIO38]    = { 0x2b4, 15, 2 },
+	[PAD_GPIO39]    = { 0x2b0, 11, 2 },
+	[PAD_GPIO40]    = { 0x2b0, 20, 2 },
+	[PAD_GPIO41]    = { 0x2b0, 23, 2 },
+	[PAD_GPIO42]    = { 0x2b0, 26, 2 },
+	[PAD_GPIO43]    = { 0x2b0, 29, 2 },
+	[PAD_GPIO44]    = { 0x2b4,  0, 2 },
+	[PAD_GPIO45]    = { 0x2b4,  3, 2 },
+	[PAD_GPIO46]    = { 0x2b4,  6, 2 },
+	[PAD_GPIO47]    = { 0x2b4,  9, 2 },
+	[PAD_GPIO48]    = { 0x2b4, 12, 2 },
+	[PAD_GPIO49]    = { 0x2b0, 14, 2 },
+	[PAD_GPIO50]    = { 0x2b0, 17, 2 },
+};
+
+static void jh7110_set_function(struct udevice *dev,
+				unsigned int pin, u32 func)
+{
+	const struct jh7110_func_sel *fs = &jh7110_sys_func_sel[pin];
+	struct starfive_pinctrl_priv *priv = dev_get_priv(dev);
+	void __iomem *reg;
+	u32 mask;
+
+	if (!fs->offset)
+		return;
+
+	if (func > fs->max)
+		return;
+
+	reg = priv->base + fs->offset;
+	func = func << fs->shift;
+	mask = 0x3U << fs->shift;
+
+	func |= readl(reg) & ~mask;
+	writel(func, reg);
+}
+
+static void jh7110_set_vin_group(struct udevice *dev, unsigned int pin)
+{
+	const struct jh7110_vin_group_sel *gs =
+		&jh7110_sys_vin_group_sel[pin];
+	struct starfive_pinctrl_priv *priv = dev_get_priv(dev);
+	void __iomem *reg;
+	u32 mask;
+	u32 grp;
+
+	if (!gs->offset)
+		return;
+
+	reg = priv->base + gs->offset;
+	grp = gs->group << gs->shift;
+	mask = 0x3U << gs->shift;
+
+	grp |= readl(reg) & ~mask;
+	writel(grp, reg);
+}
+
+static int jh7110_sys_set_one_pin_mux(struct udevice *dev, unsigned int pin,
+				      unsigned int din, u32 dout, u32 doen, u32 func)
+{
+	struct starfive_pinctrl_priv *priv = dev_get_priv(dev);
+
+	if (pin < priv->info->ngpios && func == 0)
+		starfive_set_gpiomux(dev, pin, din, dout, doen);
+
+	jh7110_set_function(dev, pin, func);
+
+	if (pin < priv->info->ngpios && func == 2)
+		jh7110_set_vin_group(dev, pin);
+
+	return 0;
+}
+
+static int jh7110_sys_get_padcfg_base(struct udevice *dev,
+				      unsigned int pin)
+{
+	if (pin < PAD_GMAC1_MDC)
+		return SYS_GPO_PDA_0_74_CFG;
+	else if (pin > PAD_GMAC1_TXC && pin <= PAD_QSPI_DATA3)
+		return SYS_GPO_PDA_89_94_CFG;
+	else
+		return -1;
+}
+
+static void jh7110_sys_init_hw(struct udevice *dev)
+{
+	struct starfive_pinctrl_priv *priv = dev_get_priv(dev);
+
+	/* mask all GPIO interrupts */
+	writel(0U, priv->base + JH7110_SYS_GPIOIE0);
+	writel(0U, priv->base + JH7110_SYS_GPIOIE1);
+	/* clear edge interrupt flags */
+	writel(~0U, priv->base + JH7110_SYS_GPIOIC0);
+	writel(~0U, priv->base + JH7110_SYS_GPIOIC1);
+	/* enable GPIO interrupts */
+	writel(1U, priv->base + JH7110_SYS_GPIOEN);
+}
+
+const struct starfive_pinctrl_soc_info jh7110_sys_pinctrl_info = {
+	/* pin conf */
+	.set_one_pinmux = jh7110_sys_set_one_pin_mux,
+	.get_padcfg_base = jh7110_sys_get_padcfg_base,
+
+	/* gpio dout/doen/din/gpioinput register */
+	.dout_reg_base = JH7110_SYS_DOUT,
+	.dout_mask = GENMASK(6, 0),
+	.doen_reg_base = JH7110_SYS_DOEN,
+	.doen_mask = GENMASK(5, 0),
+	.gpi_reg_base = JH7110_SYS_GPI,
+	.gpi_mask = GENMASK(6, 0),
+	.gpioin_reg_base = JH7110_SYS_GPIOIN,
+
+	/* gpio */
+	.gpio_bank_name = "GPIO",
+	.ngpios = JH7110_SYS_NGPIO,
+	.gpio_init_hw = jh7110_sys_init_hw,
+};
+
+static int jh7110_sys_pinctrl_probe(struct udevice *dev)
+{
+	struct starfive_pinctrl_soc_info *info =
+		(struct starfive_pinctrl_soc_info *)dev_get_driver_data(dev);
+
+	return starfive_pinctrl_probe(dev, info);
+}
+
+static const struct udevice_id jh7110_sys_pinctrl_ids[] = {
+	/* JH7110 sys pinctrl */
+	{ .compatible = "starfive,jh7110-sys-pinctrl",
+	  .data = (ulong)&jh7110_sys_pinctrl_info, },
+	{ /* sentinel */ }
+};
+
+U_BOOT_DRIVER(jh7110_sys_pinctrl) = {
+	.name		= "jh7110-sys-pinctrl",
+	.id		= UCLASS_PINCTRL,
+	.of_match	= jh7110_sys_pinctrl_ids,
+	.priv_auto	= sizeof(struct starfive_pinctrl_priv),
+	.ops		= &starfive_pinctrl_ops,
+	.probe		= jh7110_sys_pinctrl_probe,
+};
diff --git a/drivers/pinctrl/starfive/pinctrl-starfive.c b/drivers/pinctrl/starfive/pinctrl-starfive.c
new file mode 100644
index 0000000000..9b09cc21cf
--- /dev/null
+++ b/drivers/pinctrl/starfive/pinctrl-starfive.c
@@ -0,0 +1,398 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Pinctrl / GPIO driver for StarFive JH7100 SoC
+ *
+ * Copyright (C) 2022 Shanghai StarFive Technology Co., Ltd.
+ *   Author: Lee Kuan Lim <kuanlim.lee at starfivetech.com>
+ *   Author: Jianlong Huang <jianlong.huang at starfivetech.com>
+ */
+
+#include <common.h>
+#include <clk.h>
+#include <dm.h>
+#include <dm/device-internal.h>
+#include <dm/lists.h>
+#include <dm/pinctrl.h>
+#include <asm-generic/gpio.h>
+#include <linux/bitops.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <dm/device_compat.h>
+#include <dt-bindings/pinctrl/pinctrl-starfive-jh7110.h>
+
+#include "pinctrl-starfive.h"
+
+/* pad control bits */
+#define STARFIVE_PADCFG_POS	BIT(7)
+#define STARFIVE_PADCFG_SMT	BIT(6)
+#define STARFIVE_PADCFG_SLEW	BIT(5)
+#define STARFIVE_PADCFG_PD	BIT(4)
+#define STARFIVE_PADCFG_PU	BIT(3)
+#define STARFIVE_PADCFG_BIAS	(STARFIVE_PADCFG_PD | STARFIVE_PADCFG_PU)
+#define STARFIVE_PADCFG_DS_MASK	GENMASK(2, 1)
+#define STARFIVE_PADCFG_DS_2MA	(0U << 1)
+#define STARFIVE_PADCFG_DS_4MA	BIT(1)
+#define STARFIVE_PADCFG_DS_8MA	(2U << 1)
+#define STARFIVE_PADCFG_DS_12MA	(3U << 1)
+#define STARFIVE_PADCFG_IE	BIT(0)
+#define GPIO_NUM_PER_WORD	32
+
+/*
+ * The packed pinmux values from the device tree look like this:
+ *
+ *  | 31 - 24 | 23 - 16 | 15 - 10 |  9 - 8   | 7 - 0 |
+ *  |   din   |  dout   |  doen   | function |  pin  |
+ */
+static unsigned int starfive_pinmux_din(u32 v)
+{
+	return (v & GENMASK(31, 24)) >> 24;
+}
+
+static u32 starfive_pinmux_dout(u32 v)
+{
+	return (v & GENMASK(23, 16)) >> 16;
+}
+
+static u32 starfive_pinmux_doen(u32 v)
+{
+	return (v & GENMASK(15, 10)) >> 10;
+}
+
+static u32 starfive_pinmux_function(u32 v)
+{
+	return (v & GENMASK(9, 8)) >> 8;
+}
+
+static unsigned int starfive_pinmux_pin(u32 v)
+{
+	return v & GENMASK(7, 0);
+}
+
+void starfive_set_gpiomux(struct udevice *dev, unsigned int pin,
+			  unsigned int din, u32 dout, u32 doen)
+{
+	struct starfive_pinctrl_priv *priv = dev_get_priv(dev);
+	const struct starfive_pinctrl_soc_info *info = priv->info;
+
+	unsigned int offset = 4 * (pin / 4);
+	unsigned int shift  = 8 * (pin % 4);
+	u32 dout_mask = info->dout_mask << shift;
+	u32 done_mask = info->doen_mask << shift;
+	u32 ival, imask;
+	void __iomem *reg_dout;
+	void __iomem *reg_doen;
+	void __iomem *reg_din;
+
+	reg_dout = priv->base + info->dout_reg_base + offset;
+	reg_doen = priv->base + info->doen_reg_base + offset;
+	dout <<= shift;
+	doen <<= shift;
+	if (din != GPI_NONE) {
+		unsigned int ioffset = 4 * (din / 4);
+		unsigned int ishift  = 8 * (din % 4);
+
+		reg_din = priv->base + info->gpi_reg_base + ioffset;
+		ival = (pin + 2) << ishift;
+		imask = info->gpi_mask << ishift;
+	} else {
+		reg_din = NULL;
+	}
+
+	dout |= readl(reg_dout) & ~dout_mask;
+	writel(dout, reg_dout);
+	doen |= readl(reg_doen) & ~done_mask;
+	writel(doen, reg_doen);
+	if (reg_din) {
+		ival |= readl(reg_din) & ~imask;
+		writel(ival, reg_din);
+	}
+}
+
+static const struct pinconf_param starfive_pinconf_params[] = {
+	{ "bias-disable",	PIN_CONFIG_BIAS_DISABLE,	0 },
+	{ "bias-pull-up",	PIN_CONFIG_BIAS_PULL_UP,	1 },
+	{ "bias-pull-down",	PIN_CONFIG_BIAS_PULL_DOWN,	1 },
+	{ "drive-strength",	PIN_CONFIG_DRIVE_STRENGTH,	0 },
+	{ "input-schmitt-enable",  PIN_CONFIG_INPUT_SCHMITT_ENABLE, 1 },
+	{ "input-schmitt-disable", PIN_CONFIG_INPUT_SCHMITT_ENABLE, 0 },
+	{ "input-enable",	PIN_CONFIG_INPUT_ENABLE,	1 },
+	{ "input-disable",	PIN_CONFIG_INPUT_ENABLE,	0 },
+	{ "slew-rate",		PIN_CONFIG_SLEW_RATE,		0 },
+};
+
+static const u8 starfive_drive_strength_mA[4] = { 2, 4, 8, 12 };
+
+static u32 starfive_padcfg_ds_from_mA(u32 v)
+{
+	int i;
+
+	for (i = 0; i < 3; i++) {
+		if (v <= starfive_drive_strength_mA[i])
+			break;
+	}
+	return i << 1;
+}
+
+static void starfive_padcfg_rmw(struct udevice *dev,
+				unsigned int pin, u32 mask, u32 value)
+{
+	struct starfive_pinctrl_priv *priv = dev_get_priv(dev);
+	struct starfive_pinctrl_soc_info *info = priv->info;
+	void __iomem *reg;
+	int padcfg_base;
+
+	if (!info->get_padcfg_base)
+		return;
+
+	padcfg_base = info->get_padcfg_base(dev, pin);
+	if (padcfg_base < 0)
+		return;
+
+	reg = priv->base + padcfg_base + 4 * pin;
+	value &= mask;
+
+	value |= readl(reg) & ~mask;
+	writel(value, reg);
+}
+
+static int starfive_pinconf_set(struct udevice *dev, unsigned int pin,
+				unsigned int param, unsigned int arg)
+{
+	u16 mask = 0;
+	u16 value = 0;
+
+	switch (param) {
+	case PIN_CONFIG_BIAS_DISABLE:
+		mask |= STARFIVE_PADCFG_BIAS;
+		value &= ~STARFIVE_PADCFG_BIAS;
+		break;
+	case PIN_CONFIG_BIAS_PULL_DOWN:
+		if (arg == 0)
+			return -EINVAL;
+		mask |= STARFIVE_PADCFG_BIAS;
+		value = (value & ~STARFIVE_PADCFG_BIAS) | STARFIVE_PADCFG_PD;
+		break;
+	case PIN_CONFIG_BIAS_PULL_UP:
+		if (arg == 0)
+			return -EINVAL;
+		mask |= STARFIVE_PADCFG_BIAS;
+		value = (value & ~STARFIVE_PADCFG_BIAS) | STARFIVE_PADCFG_PU;
+		break;
+	case PIN_CONFIG_DRIVE_STRENGTH:
+		mask |= STARFIVE_PADCFG_DS_MASK;
+		value = (value & ~STARFIVE_PADCFG_DS_MASK) |
+			starfive_padcfg_ds_from_mA(arg);
+		break;
+	case PIN_CONFIG_INPUT_ENABLE:
+		mask |= STARFIVE_PADCFG_IE;
+		if (arg)
+			value |= STARFIVE_PADCFG_IE;
+		else
+			value &= ~STARFIVE_PADCFG_IE;
+		break;
+	case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
+		mask |= STARFIVE_PADCFG_SMT;
+		if (arg)
+			value |= STARFIVE_PADCFG_SMT;
+		else
+			value &= ~STARFIVE_PADCFG_SMT;
+		break;
+	case PIN_CONFIG_SLEW_RATE:
+		mask |= STARFIVE_PADCFG_SLEW;
+		if (arg)
+			value |= STARFIVE_PADCFG_SLEW;
+		else
+			value &= ~STARFIVE_PADCFG_SLEW;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	starfive_padcfg_rmw(dev, pin, mask, value);
+
+	return 0;
+}
+
+static int starfive_property_set(struct udevice *dev, u32 pinmux_group)
+{
+	struct starfive_pinctrl_priv *priv = dev_get_priv(dev);
+	struct starfive_pinctrl_soc_info *info = priv->info;
+
+	if (info->set_one_pinmux)
+		info->set_one_pinmux(dev,
+			starfive_pinmux_pin(pinmux_group),
+			starfive_pinmux_din(pinmux_group),
+			starfive_pinmux_dout(pinmux_group),
+			starfive_pinmux_doen(pinmux_group),
+			starfive_pinmux_function(pinmux_group));
+
+	return starfive_pinmux_pin(pinmux_group);
+}
+
+const struct pinctrl_ops starfive_pinctrl_ops = {
+	.set_state = pinctrl_generic_set_state,
+	.pinconf_num_params	= ARRAY_SIZE(starfive_pinconf_params),
+	.pinconf_params		= starfive_pinconf_params,
+	.pinconf_set		= starfive_pinconf_set,
+	.pinmux_property_set = starfive_property_set,
+};
+
+static int starfive_gpio_get_direction(struct udevice *dev, unsigned int off)
+{
+	struct udevice *pdev = dev->parent;
+	struct starfive_pinctrl_priv *priv = dev_get_priv(pdev);
+	struct starfive_pinctrl_soc_info *info = priv->info;
+
+	unsigned int offset = 4 * (off / 4);
+	unsigned int shift  = 8 * (off % 4);
+	u32 doen = readl(priv->base + info->doen_reg_base + offset);
+
+	doen = (doen >> shift) & info->doen_mask;
+
+	return doen == GPOEN_ENABLE ? GPIOF_OUTPUT : GPIOF_INPUT;
+}
+
+static int starfive_gpio_direction_input(struct udevice *dev, unsigned int off)
+{
+	struct udevice *pdev = dev->parent;
+	struct starfive_pinctrl_priv *priv = dev_get_priv(pdev);
+	struct starfive_pinctrl_soc_info *info = priv->info;
+
+	/* enable input and schmitt trigger */
+	starfive_padcfg_rmw(pdev, off,
+			    STARFIVE_PADCFG_IE | STARFIVE_PADCFG_SMT,
+			    STARFIVE_PADCFG_IE | STARFIVE_PADCFG_SMT);
+
+	if (info->set_one_pinmux)
+		info->set_one_pinmux(pdev, off,
+				GPI_NONE, GPOUT_LOW, GPOEN_DISABLE, 0);
+
+	return 0;
+}
+
+static int starfive_gpio_direction_output(struct udevice *dev,
+					  unsigned int off, int val)
+{
+	struct udevice *pdev = dev->parent;
+	struct starfive_pinctrl_priv *priv = dev_get_priv(pdev);
+	struct starfive_pinctrl_soc_info *info = priv->info;
+
+	if (info->set_one_pinmux)
+		info->set_one_pinmux(pdev, off,
+				GPI_NONE, val ? GPOUT_HIGH : GPOUT_LOW,
+				GPOEN_ENABLE, 0);
+
+	/* disable input, schmitt trigger and bias */
+	starfive_padcfg_rmw(pdev, off,
+			    STARFIVE_PADCFG_IE | STARFIVE_PADCFG_SMT
+			    | STARFIVE_PADCFG_BIAS,
+			    0);
+
+	return 0;
+}
+
+static int starfive_gpio_get_value(struct udevice *dev, unsigned int off)
+{
+	struct udevice *pdev = dev->parent;
+	struct starfive_pinctrl_priv *priv = dev_get_priv(pdev);
+	struct starfive_pinctrl_soc_info *info = priv->info;
+
+	void __iomem *reg = priv->base + info->gpioin_reg_base
+			+ 4 * (off / GPIO_NUM_PER_WORD);
+
+	return !!(readl(reg) & BIT(off % GPIO_NUM_PER_WORD));
+}
+
+static int starfive_gpio_set_value(struct udevice *dev,
+				   unsigned int off, int val)
+{
+	struct udevice *pdev = dev->parent;
+	struct starfive_pinctrl_priv *priv = dev_get_priv(pdev);
+	struct starfive_pinctrl_soc_info *info = priv->info;
+
+	unsigned int offset = 4 * (off / 4);
+	unsigned int shift  = 8 * (off % 4);
+	void __iomem *reg_dout = priv->base + info->dout_reg_base + offset;
+	u32 dout = (val ? GPOUT_HIGH : GPOUT_LOW) << shift;
+	u32 mask = info->dout_mask << shift;
+
+	dout |= readl(reg_dout) & ~mask;
+	writel(dout, reg_dout);
+
+	return 0;
+}
+
+static int starfive_gpio_probe(struct udevice *dev)
+{
+	struct gpio_dev_priv *uc_priv;
+	struct udevice *pdev = dev->parent;
+	struct starfive_pinctrl_priv *priv = dev_get_priv(pdev);
+	struct starfive_pinctrl_soc_info *info = priv->info;
+
+	uc_priv = dev_get_uclass_priv(dev);
+	uc_priv->bank_name = info->gpio_bank_name;
+	uc_priv->gpio_count = info->ngpios;
+
+	if (!info->gpio_init_hw)
+		return -ENXIO;
+
+	info->gpio_init_hw(pdev);
+
+	return 0;
+}
+
+static const struct dm_gpio_ops starfive_gpio_ops = {
+	.get_function = starfive_gpio_get_direction,
+	.direction_input = starfive_gpio_direction_input,
+	.direction_output = starfive_gpio_direction_output,
+	.get_value = starfive_gpio_get_value,
+	.set_value = starfive_gpio_set_value,
+};
+
+static struct driver starfive_gpio_driver = {
+	.name = "starfive_gpio",
+	.id = UCLASS_GPIO,
+	.probe = starfive_gpio_probe,
+	.ops = &starfive_gpio_ops,
+};
+
+static int starfive_gpiochip_register(struct udevice *parent)
+{
+	struct uclass_driver *drv;
+	struct udevice *dev;
+	int ret;
+	ofnode node;
+
+	drv = lists_uclass_lookup(UCLASS_GPIO);
+	if (!drv)
+		return -ENOENT;
+
+	node = dev_ofnode(parent);
+	ret = device_bind_with_driver_data(parent, &starfive_gpio_driver,
+					   "starfive_gpio", 0, node, &dev);
+
+	return (ret == 0) ? 0 : ret;
+}
+
+int starfive_pinctrl_probe(struct udevice *dev,
+			   const struct starfive_pinctrl_soc_info *info)
+{
+	struct starfive_pinctrl_priv *priv = dev_get_priv(dev);
+	int ret;
+
+	/* Bind pinctrl_info from .data to priv */
+	priv->info =
+		(struct starfive_pinctrl_soc_info *)dev_get_driver_data(dev);
+
+	if (!priv->info)
+		return -EINVAL;
+
+	priv->base = dev_read_addr_ptr(dev);
+	if (!priv->base)
+		return -EINVAL;
+
+	/* gpiochip register */
+	ret = starfive_gpiochip_register(dev);
+
+	return (ret == 0) ? 0 : ret;
+}
diff --git a/drivers/pinctrl/starfive/pinctrl-starfive.h b/drivers/pinctrl/starfive/pinctrl-starfive.h
new file mode 100644
index 0000000000..5721c3c36e
--- /dev/null
+++ b/drivers/pinctrl/starfive/pinctrl-starfive.h
@@ -0,0 +1,55 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Pinctrl / GPIO driver for StarFive SoC
+ *
+ * Copyright (C) 2022 Shanghai StarFive Technology Co., Ltd.
+ *   Author: Lee Kuan Lim <kuanlim.lee at starfivetech.com>
+ *   Author: Jianlong Huang <jianlong.huang at starfivetech.com>
+ */
+
+#define STARFIVE_PINCTRL(a, b) { .number = a, .name = b }
+
+extern const struct pinctrl_ops starfive_pinctrl_ops;
+
+struct starfive_pinctrl_pin {
+	unsigned int number;
+	const char *name;
+};
+
+struct starfive_pinctrl_soc_info {
+	/* pinctrl */
+	int (*set_one_pinmux)(struct udevice *dev, unsigned int pin,
+			      unsigned int din, u32 dout, u32 doen, u32 func);
+	int (*get_padcfg_base)(struct udevice *dev,
+			       unsigned int pin);
+
+	/* gpio dout/doen/din/gpioinput register */
+	unsigned int dout_reg_base;
+	unsigned int dout_mask;
+	unsigned int doen_reg_base;
+	unsigned int doen_mask;
+	unsigned int gpi_reg_base;
+	unsigned int gpi_mask;
+	unsigned int gpioin_reg_base;
+
+	/* gpio */
+	const char *gpio_bank_name;
+	int ngpios;
+	void (*gpio_init_hw)(struct udevice *dev);
+};
+
+/*
+ * struct starfive_pinctrl_priv - private data for Starfive pinctrl driver
+ *
+ * @padctl_base: base address of the pinctrl device
+ * @info: SoC specific data & function
+ */
+struct starfive_pinctrl_priv {
+	void __iomem *base;
+	struct starfive_pinctrl_soc_info *info;
+};
+
+void starfive_set_gpiomux(struct udevice *dev, unsigned int pin,
+			  unsigned int din, u32 dout, u32 doen);
+int starfive_pinctrl_probe(struct udevice *dev,
+			   const struct starfive_pinctrl_soc_info *info);
-- 
2.17.1



More information about the U-Boot mailing list