[PATCH V2] include: configs: am64x_evm: Change to using .env
Devarsh Thakkar
devarsht at ti.com
Thu Mar 30 13:00:54 CEST 2023
Hi Nikhil
Thanks for the patch,
On 30/03/23 14:24, Nikhil M Jain wrote:
> Move to using .env file for setting up environment variables for am64x.
>
> Signed-off-by: Nikhil M Jain <n-jain1 at ti.com>
> ---
> V2:
> - Corrected commit message.
>
> board/ti/am64x/am64x.env | 63 +++++++++++++++++++++++++++
> include/configs/am64x_evm.h | 85 -------------------------------------
> 2 files changed, 63 insertions(+), 85 deletions(-)
> create mode 100644 board/ti/am64x/am64x.env
>
> diff --git a/board/ti/am64x/am64x.env b/board/ti/am64x/am64x.env
> new file mode 100644
> index 0000000000..c3960be38e
> --- /dev/null
> +++ b/board/ti/am64x/am64x.env
> @@ -0,0 +1,63 @@
> +#include <environment/ti/ti_armv7_common.env>
> +#include <environment/ti/mmc.env>
> +#include <environment/ti/k3_dfu.env>
> +
> +findfdt=
> + if test $board_name = am64x_gpevm; then
> + setenv name_fdt k3-am642-evm.dtb; fi;
> + if test $board_name = am64x_skevm; then
> + setenv name_fdt k3-am642-sk.dtb; fi;
> + if test $name_fdt = undefined; then
> + echo WARNING: Could not determine device tree to use; fi;
> +name_kern=Image
> +console=ttyS2,115200n8
> +args_all=setenv optargs earlycon=ns16550a,mmio32,0x02800000 ${mtdparts}
> +run_kern=booti ${loadaddr} ${rd_spec} ${fdtaddr}
> +
> +boot=mmc
> +mmcdev=1
> +bootpart=1:2
> +bootdir=/boot
> +rd_spec=-
> +init_mmc=run args_all args_mmc
> +get_fdt_mmc=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${name_fdt}
> +get_overlay_mmc=
> + fdt address ${fdtaddr};
> + fdt resize 0x100000;
> + for overlay in $name_overlays;
> + do;
> + load mmc ${bootpart} ${dtboaddr} ${bootdir}/${overlay} &&
> + fdt apply ${dtboaddr};
> + done;
> +get_kern_mmc=load mmc ${bootpart} ${loadaddr}
> + ${bootdir}/${name_kern}
> +get_fit_mmc=load mmc ${bootpart} ${addr_fit}
> + ${bootdir}/${name_fit}
> +partitions=name=rootfs,start=0,size=-,uuid=${uuid_gpt_rootfs}
> +
> +args_usb=run finduuid;setenv bootargs console=${console}
> + ${optargs}
> + root=PARTUUID=${uuid} rw
> + rootfstype=${mmcrootfstype}
> +init_usb=run args_all args_usb
> +get_fdt_usb=load usb ${bootpart} ${fdtaddr} ${bootdir}/${name_fdt}
> +get_overlay_usb=
> + fdt address ${fdtaddr};
> + fdt resize 0x100000;
> + for overlay in $name_overlays;
> + do;
> + load usb ${bootpart} ${dtboaddr} ${bootdir}/${overlay} && fdt apply
> + ${dtboaddr};
> + done;
> +get_kern_usb=load usb ${bootpart} ${loadaddr}
> + ${bootdir}/${name_kern}
> +get_fit_usb=load usb ${bootpart} ${addr_fit}
> + ${bootdir}/${name_fit}
> +usbboot=setenv boot usb;
> + setenv bootpart 0:2;
> + usb start;
> + run findfdt;
> + run init_usb;
> + run get_kern_usb;
> + run get_fdt_usb;
> + run run_kern;
> diff --git a/include/configs/am64x_evm.h b/include/configs/am64x_evm.h
> index 26a7f2521e..1e37ab47b9 100644
> --- a/include/configs/am64x_evm.h
> +++ b/include/configs/am64x_evm.h
> @@ -18,91 +18,6 @@
> /* DDR Configuration */
> #define CFG_SYS_SDRAM_BASE1 0x880000000
>
> -#define PARTS_DEFAULT \
> - /* Linux partitions */ \
> - "name=rootfs,start=0,size=-,uuid=${uuid_gpt_rootfs}\0"
> -
> -/* U-Boot general configuration */
> -#define EXTRA_ENV_AM642_BOARD_SETTINGS \
> - "findfdt=" \
> - "if test $board_name = am64x_gpevm; then " \
> - "setenv fdtfile k3-am642-evm.dtb; fi; " \
> - "if test $board_name = am64x_skevm; then " \
> - "setenv fdtfile k3-am642-sk.dtb; fi;" \
> - "if test $fdtfile = undefined; then " \
> - "echo WARNING: Could not determine device tree to use; fi; \0" \
> - "name_kern=Image\0" \
> - "console=ttyS2,115200n8\0" \
> - "args_all=setenv optargs earlycon=ns16550a,mmio32,0x02800000 " \
> - "${mtdparts}\0" \
> - "run_kern=booti ${loadaddr} ${rd_spec} ${fdtaddr}\0"
> -
> -/* U-Boot MMC-specific configuration */
> -#define EXTRA_ENV_AM642_BOARD_SETTINGS_MMC \
> - "boot=mmc\0" \
> - "mmcdev=1\0" \
> - "bootpart=1:2\0" \
> - "bootdir=/boot\0" \
> - "rd_spec=-\0" \
> - "init_mmc=run args_all args_mmc\0" \
> - "get_fdt_mmc=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
> - "get_overlay_mmc=" \
> - "fdt address ${fdtaddr};" \
> - "fdt resize 0x100000;" \
> - "for overlay in $name_overlays;" \
> - "do;" \
> - "load mmc ${bootpart} ${dtboaddr} ${bootdir}/${overlay} && " \
> - "fdt apply ${dtboaddr};" \
> - "done;\0" \
> - "get_kern_mmc=load mmc ${bootpart} ${loadaddr} " \
> - "${bootdir}/${name_kern}\0" \
> - "get_fit_mmc=load mmc ${bootpart} ${addr_fit} " \
> - "${bootdir}/${name_fit}\0" \
> - "partitions=" PARTS_DEFAULT
> -
> -#define EXTRA_ENV_AM642_BOARD_SETTING_USBMSC \
> - "args_usb=run finduuid;setenv bootargs console=${console} " \
> - "${optargs} " \
> - "root=PARTUUID=${uuid} rw " \
> - "rootfstype=${mmcrootfstype}\0" \
> - "init_usb=run args_all args_usb\0" \
> - "get_fdt_usb=load usb ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
> - "get_overlay_usb=" \
> - "fdt address ${fdtaddr};" \
> - "fdt resize 0x100000;" \
> - "for overlay in $name_overlays;" \
> - "do;" \
> - "load usb ${bootpart} ${dtboaddr} ${bootdir}/${overlay} && " \
> - "fdt apply ${dtboaddr};" \
> - "done;\0" \
> - "get_kern_usb=load usb ${bootpart} ${loadaddr} " \
> - "${bootdir}/${name_kern}\0" \
> - "get_fit_usb=load usb ${bootpart} ${addr_fit} " \
> - "${bootdir}/${name_fit}\0" \
> - "usbboot=setenv boot usb;" \
> - "setenv bootpart 0:2;" \
> - "usb start;" \
> - "run findfdt;" \
> - "run init_usb;" \
> - "run get_kern_usb;" \
> - "run get_fdt_usb;" \
> - "run run_kern\0"
> -
> -#define EXTRA_ENV_DFUARGS \
> - DFU_ALT_INFO_MMC \
> - DFU_ALT_INFO_EMMC \
> - DFU_ALT_INFO_RAM \
> - DFU_ALT_INFO_OSPI
> -
> -/* Incorporate settings into the U-Boot environment */
> -#define CFG_EXTRA_ENV_SETTINGS \
> - DEFAULT_LINUX_BOOT_ENV \
> - DEFAULT_MMC_TI_ARGS \
> - EXTRA_ENV_AM642_BOARD_SETTINGS \
> - EXTRA_ENV_AM642_BOARD_SETTINGS_MMC \
> - EXTRA_ENV_DFUARGS
Don't we need dfu env args migrated to env.txt too ?
Regards
Devarsh
\
> - EXTRA_ENV_AM642_BOARD_SETTING_USBMSC
> -
> /* Now for the remaining common defines */
> #include <configs/ti_armv7_common.h>
>
More information about the U-Boot
mailing list