[PATCH v4 00/15] Add splash screen support at u-boot SPL

[Simon Glass]

Hi Nikhil,

On Thu, 30 Mar 2023 at 01:01, Nikhil M Jain <n-jain1 at ti.com> wrote:
>
> To enable splash screen at SPL stage move video driver and splash screen
> framework at SPL, which will bring up image on display very quickly and
> thus have early display support in SPL.
>
> Change in V4
> - Add Reviewed-by tag in apprpriate patch
>
> Change in V3
> - Add separate video configs for SPL splash screen
> - Add rule to compile video driver in drivers/Makefile at SPL
> - Add rule to compile splash.c and splash_source.c
> - Squash drivers: video: video-uclass: Disable u-boot logo at SPL into
>   drivers: video: Use CONFIG_IS_ENABLED and CONFIG_VAL
> - Split cmd/bmp.c to separate bmp functions and commands.
> - Add CONFIG_BMP and CONFIG_SPL_BMP.
> - Add rule to compile necessary files required for video driver.
> - Add rule to compile common/bmp.c
>
> Change in V2
> - Removed artifacts from bad patch apply.
>
> Nikhil M Jain (15):
>   drivers: video: Kconfig: Add configs for enabling video at SPL
>   drivers: video: tidss: Kconfig: Configs to enable TIDSS at SPL
>   drivers: Makefile: Add rule to compile video driver
>   drivers: video: Makefile: Rule to compile necessary video driver
>     files.
>   drivers: video: tidss: Makefile: Add condition to compile TIDSS at SPL
>   common: Makefile: Add rule to compile splash and splash_source at SPL
>   common: Kconfig: Add BMP configs
>   cmd: bmp: Split bmp commands and functions
>   cmd: Makefile: Rule to compile bmp_cmd
>   common: Makefile: Rule to compile bmp.c
>   drivers: video: Enable necessary video functions at SPL
>   common: Enable splash functions at SPL
>   include: Enable video related global data variable and splash at SPL
>   common: splash: Replace CONFIG_CMD_BMP
>   board: ti: am62x: evm: OSPI support for splash screen
>
>  board/ti/am62x/evm.c              |   8 +-
>  cmd/Makefile                      |   3 +-
>  cmd/bmp_cmd.c                     |  98 +++++++++++++
>  common/Kconfig                    |  12 ++
>  common/Makefile                   |   3 +
>  {cmd => common}/bmp.c             | 114 +--------------
>  common/splash.c                   |  10 +-
>  drivers/Makefile                  |   2 +-
>  drivers/video/Kconfig             | 221 ++++++++++++++++++++++++++++++
>  drivers/video/Makefile            |  10 ++
>  drivers/video/console_normal.c    |   6 +-
>  drivers/video/tidss/Kconfig       |   6 +
>  drivers/video/tidss/Makefile      |   2 +-
>  drivers/video/vidconsole-uclass.c |   2 +-
>  drivers/video/video-uclass.c      |  14 +-
>  drivers/video/video_bmp.c         |   8 +-
>  include/asm-generic/global_data.h |   4 +-
>  include/splash.h                  |   6 +-
>  include/video.h                   |   7 +
>  19 files changed, 399 insertions(+), 137 deletions(-)
>  create mode 100644 cmd/bmp_cmd.c
>  rename {cmd => common}/bmp.c (58%)
>
> --
> 2.34.1
>

I wasn't able to apply this to -next due to conflicts. Could you
please check that?

Regards,
Simon