[PATCH 10/12] arm: mach-k3: Move sdelay() and wait_on_value() declaration

[Andrew Davis]

These probably should be in some system wide header given their use.
Until then move them out of K3 sys_proto.h so we can finish cleaning
that header out.

Signed-off-by: Andrew Davis <afd at ti.com>
---
 arch/arm/mach-k3/include/mach/sys_proto.h | 4 ----
 drivers/ram/k3-am654-ddrss.c              | 4 ++++
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mach-k3/include/mach/sys_proto.h b/arch/arm/mach-k3/include/mach/sys_proto.h
index bbe57718e1a..4b4e2a5be39 100644
--- a/arch/arm/mach-k3/include/mach/sys_proto.h
+++ b/arch/arm/mach-k3/include/mach/sys_proto.h
@@ -7,10 +7,6 @@
 #ifndef _SYS_PROTO_H_
 #define _SYS_PROTO_H_
 
-void sdelay(unsigned long loops);
-u32 wait_on_value(u32 read_bit_mask, u32 match_value, void *read_addr,
-		  u32 bound);
-
 void k3_spl_init(void);
 void k3_mem_init(void);
 bool check_rom_loaded_sysfw(void);
diff --git a/drivers/ram/k3-am654-ddrss.c b/drivers/ram/k3-am654-ddrss.c
index 4453c247b29..adac14f9464 100644
--- a/drivers/ram/k3-am654-ddrss.c
+++ b/drivers/ram/k3-am654-ddrss.c
@@ -18,6 +18,10 @@
 #include <power/regulator.h>
 #include "k3-am654-ddrss.h"
 
+void sdelay(unsigned long loops);
+u32 wait_on_value(u32 read_bit_mask, u32 match_value, void *read_addr,
+		  u32 bound);
+
 #define LDELAY 10000
 
 /* DDRSS PHY configuration register fixed values */
-- 
2.39.2