[PATCH 30/38] x86: Enable display for QEMU 64-bit

[Simon Glass]

Enable the various options needed for display to work on the qemu-x86_64
board. This includes expanding the available malloc() memory in SPL,
since the PCI bus must be enumerated in order to find the video device.

It also includes enabling a bloblist, so that the video parameters can be
passed. This is placed at address 10000 but is not needed after U-Boot
proper reads the information there.

Signed-off-by: Simon Glass <sjg at chromium.org>
---

 configs/qemu-x86_64_defconfig | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/configs/qemu-x86_64_defconfig b/configs/qemu-x86_64_defconfig
index f29a5aa0f813..371ca9de8429 100644
--- a/configs/qemu-x86_64_defconfig
+++ b/configs/qemu-x86_64_defconfig
@@ -7,6 +7,7 @@ CONFIG_MAX_CPUS=2
 CONFIG_SPL_DM_SPI=y
 CONFIG_DEFAULT_DEVICE_TREE="qemu-x86_i440fx"
 CONFIG_SPL_TEXT_BASE=0xfffd0000
+CONFIG_SPL_SYS_MALLOC_F_LEN=0x2000
 CONFIG_DEBUG_UART_BASE=0x3f8
 CONFIG_DEBUG_UART_CLOCK=1843200
 CONFIG_X86_RUN_64BIT=y
@@ -29,7 +30,10 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_LAST_STAGE_INIT=y
 CONFIG_PCI_INIT_R=y
+CONFIG_BLOBLIST=y
+CONFIG_BLOBLIST_ADDR=0x10000
 CONFIG_SPL_NO_BSS_LIMIT=y
+CONFIG_SPL_BOARD_INIT=y
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 CONFIG_SPL_CPU=y
 CONFIG_SPL_ENV_SUPPORT=y
@@ -69,10 +73,12 @@ CONFIG_LBA48=y
 CONFIG_SYS_64BIT_LBA=y
 CONFIG_CPU=y
 CONFIG_NVME_PCI=y
+CONFIG_SPL_PCI_PNP=y
 CONFIG_SPL_DM_RTC=y
 CONFIG_SYS_NS16550_PORT_MAPPED=y
 CONFIG_SPI=y
 CONFIG_USB_KEYBOARD=y
+CONFIG_SPL_VIDEO=y
 CONFIG_FRAMEBUFFER_SET_VESA_MODE=y
 CONFIG_FRAMEBUFFER_VESA_MODE_USER=y
 CONFIG_FRAMEBUFFER_VESA_MODE=0x144
-- 
2.40.0.348.gf938b09366-goog