[PATCH 1/6] misc: add Qualcomm GENI SE QUP device driver

Konrad Dybcio konrad.dybcio at linaro.org
Fri Mar 31 03:23:43 CEST 2023



On 30.03.2023 21:47, Vladimir Zapolskiy wrote:
> This change adds a Qualcomm GENI SE QUP device driver as a wrapper for
> actually enabled and used serial devices found on a board.
> 
> At the moment the driver is pretty simple, its intention is to populate
> childred devices and provide I/O mem read interface to them as clients,
> this is needed for GENI UART driver to set up a proper clock divider
> and provide the actually asked baud rate.
> 
> Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy at linaro.org>
> ---
>  drivers/misc/Kconfig        |  6 ++++++
>  drivers/misc/Makefile       |  1 +
>  drivers/misc/qcom-geni-se.c | 42 +++++++++++++++++++++++++++++++++++++
>  3 files changed, 49 insertions(+)
>  create mode 100644 drivers/misc/qcom-geni-se.c
> 
> diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
> index b5707a15c504..348e1ab407ad 100644
> --- a/drivers/misc/Kconfig
> +++ b/drivers/misc/Kconfig
> @@ -511,6 +511,12 @@ config WINBOND_W83627
>  	  legacy UART or other devices in the Winbond Super IO chips
>  	  on X86 platforms.
>  
> +config QCOM_GENI_SE
> +	bool "Qualcomm GENI Serial Engine Driver"
> +	help
> +	  The driver manages Generic Interface (GENI) firmware based
> +	  Qualcomm Technologies, Inc. Universal Peripheral (QUP) Wrapper.
> +
>  config QFW
>  	bool
>  	help
> diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
> index 3b792f2a14ce..52aed096021f 100644
> --- a/drivers/misc/Makefile
> +++ b/drivers/misc/Makefile
> @@ -60,6 +60,7 @@ obj-$(CONFIG_NUVOTON_NCT6102D) += nuvoton_nct6102d.o
>  obj-$(CONFIG_P2SB) += p2sb-uclass.o
>  obj-$(CONFIG_PCA9551_LED) += pca9551_led.o
>  obj-$(CONFIG_$(SPL_)PWRSEQ) += pwrseq-uclass.o
> +obj-$(CONFIG_QCOM_GENI_SE) += qcom-geni-se.o
>  ifdef CONFIG_QFW
>  obj-y += qfw.o
>  obj-$(CONFIG_QFW_PIO) += qfw_pio.o
> diff --git a/drivers/misc/qcom-geni-se.c b/drivers/misc/qcom-geni-se.c
> new file mode 100644
> index 000000000000..4f1775b11f62
> --- /dev/null
> +++ b/drivers/misc/qcom-geni-se.c
> @@ -0,0 +1,42 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Qualcomm Generic Interface (GENI) Serial Engine (SE) Wrapper
> + *
> + * (C) Copyright 2023 Vladimir Zapolskiy <vladimir.zapolskiy at linaro.org>
> + */
> +
> +#include <common.h>
> +#include <dm.h>
> +#include <misc.h>
> +#include <asm/io.h>
> +
> +static int geni_se_qup_read(struct udevice *dev, int offset,
> +			    void *buf, int size)
> +{
> +	fdt_addr_t base = dev_read_addr(dev);
> +
> +	if (size != sizeof(u32))
> +		return -EINVAL;
> +
> +	*(u32 *)buf = readl(base + offset);
Maybe 

u32 *buffer = buf;

[...]

*buf = readl..

would be more stylish, but that's a nit and I don't have
any other complaints! :D

Reviewed-by: Konrad Dybcio <konrad.dybcio at linaro.org>

Konrad
> +
> +	return 0;
> +}
> +
> +static struct misc_ops geni_se_qup_ops = {
> +	.read = geni_se_qup_read,
> +};
> +
> +static const struct udevice_id geni_se_qup_ids[] = {
> +	{ .compatible = "qcom,geni-se-qup" },
> +	{}
> +};
> +
> +U_BOOT_DRIVER(geni_se_qup) = {
> +	.name = "geni_se_qup",
> +	.id = UCLASS_MISC,
> +	.of_match = geni_se_qup_ids,
> +	.bind = dm_scan_fdt_dev,
> +	.ops = &geni_se_qup_ops,
> +	.flags  = DM_FLAG_PRE_RELOC,
> +};


More information about the U-Boot mailing list