[PATCH] rockchip: Pinebook Pro: Fix emmc default configuration

[Wolfgang Zarre]

If u-boot is installed on the internal emmc, then this will
allow to boot without failure.

Signed-off-by: Wolfgang Zarre <lxdev12 at zirdeon.com>
---

 configs/pinebook-pro-rk3399_defconfig | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/configs/pinebook-pro-rk3399_defconfig b/configs/pinebook-pro-rk3399_defconfig
index dff4695e37..58a8b91aa6 100644
--- a/configs/pinebook-pro-rk3399_defconfig
+++ b/configs/pinebook-pro-rk3399_defconfig
@@ -6,6 +6,7 @@ CONFIG_TEXT_BASE=0x00200000
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000
+CONFIG_SF_DEFAULT_SPEED=20000000
 CONFIG_ENV_SIZE=0x8000
 CONFIG_ENV_OFFSET=0x3F8000
 CONFIG_DEFAULT_DEVICE_TREE="rk3399-pinebook-pro"
@@ -18,6 +19,7 @@ CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
 CONFIG_SYS_LOAD_ADDR=0x800800
+CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
 CONFIG_BOOTDELAY=3
 CONFIG_USE_PREBOOT=y
@@ -57,17 +59,23 @@ CONFIG_LED=y
 CONFIG_LED_GPIO=y
 CONFIG_MISC=y
 CONFIG_ROCKCHIP_EFUSE=y
+CONFIG_MMC_IO_VOLTAGE=y
+CONFIG_SPL_MMC_IO_VOLTAGE=y
+CONFIG_MMC_UHS_SUPPORT=y
+CONFIG_SPL_MMC_UHS_SUPPORT=y
+CONFIG_MMC_HS400_ES_SUPPORT=y
+CONFIG_SPL_MMC_HS400_ES_SUPPORT=y
+CONFIG_MMC_HS400_SUPPORT=y
+CONFIG_SPL_MMC_HS400_SUPPORT=y
 CONFIG_MMC_DW=y
 CONFIG_MMC_DW_ROCKCHIP=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_SDMA=y
 CONFIG_MMC_SDHCI_ROCKCHIP=y
 CONFIG_SF_DEFAULT_BUS=1
-CONFIG_SF_DEFAULT_SPEED=20000000
 CONFIG_SPI_FLASH_GIGADEVICE=y
 CONFIG_SPI_FLASH_WINBOND=y
 CONFIG_NVME_PCI=y
-CONFIG_PCI=y
 CONFIG_PHY_ROCKCHIP_INNO_USB2=y
 CONFIG_PHY_ROCKCHIP_TYPEC=y
 CONFIG_DM_PMIC_FAN53555=y
-- 
2.39.2