[PATCH] board: gateworks: venice: add GPIO name lookup

[Tim Harvey]

Add GPIO name lookup so that you can act on GPIO's by name vs controller
id:

Before:
u-boot=> gpio input pci_wdis#
GPIO: 'pci_wdis#' not found
Command 'gpio' failed: Error -22

After:
u-boot=> gpio input pci_wdis#
gpio: pin pci_wdis# (gpio 103) value is 1

Signed-off-by: Tim Harvey <tharvey at gateworks.com>
---
 configs/imx8mm_venice_defconfig | 1 +
 configs/imx8mn_venice_defconfig | 1 +
 configs/imx8mp_venice_defconfig | 1 +
 3 files changed, 3 insertions(+)

diff --git a/configs/imx8mm_venice_defconfig b/configs/imx8mm_venice_defconfig
index db2da79ab109..a55e0cd76b54 100644
--- a/configs/imx8mm_venice_defconfig
+++ b/configs/imx8mm_venice_defconfig
@@ -88,6 +88,7 @@ CONFIG_CLK_COMPOSITE_CCF=y
 CONFIG_SPL_CLK_IMX8MM=y
 CONFIG_CLK_IMX8MM=y
 CONFIG_GPIO_HOG=y
+CONFIG_DM_GPIO_LOOKUP_LABEL=y
 CONFIG_MXC_GPIO=y
 CONFIG_DM_I2C=y
 CONFIG_LED=y
diff --git a/configs/imx8mn_venice_defconfig b/configs/imx8mn_venice_defconfig
index e9cb26495075..4709ecace65c 100644
--- a/configs/imx8mn_venice_defconfig
+++ b/configs/imx8mn_venice_defconfig
@@ -89,6 +89,7 @@ CONFIG_SPL_DM=y
 CONFIG_SPL_CLK_IMX8MN=y
 CONFIG_CLK_IMX8MN=y
 CONFIG_GPIO_HOG=y
+CONFIG_DM_GPIO_LOOKUP_LABEL=y
 CONFIG_MXC_GPIO=y
 CONFIG_DM_I2C=y
 CONFIG_LED=y
diff --git a/configs/imx8mp_venice_defconfig b/configs/imx8mp_venice_defconfig
index 4d0432078d56..6b6a15588cd4 100644
--- a/configs/imx8mp_venice_defconfig
+++ b/configs/imx8mp_venice_defconfig
@@ -86,6 +86,7 @@ CONFIG_SPL_DM=y
 CONFIG_CLK_COMPOSITE_CCF=y
 CONFIG_CLK_IMX8MP=y
 CONFIG_GPIO_HOG=y
+CONFIG_DM_GPIO_LOOKUP_LABEL=y
 CONFIG_MXC_GPIO=y
 CONFIG_DM_I2C=y
 CONFIG_LED=y
-- 
2.25.1