[RFC PATCH v2 2/7] clk: ast2600: Move soc_clk_dump function

Igor Prusov ivprusov at sberdevices.ru
Wed May 3 22:37:15 CEST 2023


Move clock dump function to avoid forward declaration after switching to
dump in clk_ops.

Signed-off-by: Igor Prusov <ivprusov at sberdevices.ru>
---
 drivers/clk/aspeed/clk_ast2600.c | 70 ++++++++++++++++----------------
 1 file changed, 35 insertions(+), 35 deletions(-)

diff --git a/drivers/clk/aspeed/clk_ast2600.c b/drivers/clk/aspeed/clk_ast2600.c
index e5ada5b6d4..b3cc8392fa 100644
--- a/drivers/clk/aspeed/clk_ast2600.c
+++ b/drivers/clk/aspeed/clk_ast2600.c
@@ -1104,41 +1104,6 @@ static int ast2600_clk_enable(struct clk *clk)
 	return 0;
 }
 
-struct clk_ops ast2600_clk_ops = {
-	.get_rate = ast2600_clk_get_rate,
-	.set_rate = ast2600_clk_set_rate,
-	.enable = ast2600_clk_enable,
-};
-
-static int ast2600_clk_probe(struct udevice *dev)
-{
-	struct ast2600_clk_priv *priv = dev_get_priv(dev);
-
-	priv->scu = devfdt_get_addr_ptr(dev);
-	if (IS_ERR(priv->scu))
-		return PTR_ERR(priv->scu);
-
-	ast2600_init_rgmii_clk(priv->scu, &rgmii_clk_defconfig);
-	ast2600_init_rmii_clk(priv->scu, &rmii_clk_defconfig);
-	ast2600_configure_mac12_clk(priv->scu);
-	ast2600_configure_mac34_clk(priv->scu);
-	ast2600_configure_rsa_ecc_clk(priv->scu);
-
-	return 0;
-}
-
-static int ast2600_clk_bind(struct udevice *dev)
-{
-	int ret;
-
-	/* The reset driver does not have a device node, so bind it here */
-	ret = device_bind_driver(gd->dm_root, "ast_sysreset", "reset", &dev);
-	if (ret)
-		debug("Warning: No reset driver: ret=%d\n", ret);
-
-	return 0;
-}
-
 struct aspeed_clks {
 	ulong id;
 	const char *name;
@@ -1203,6 +1168,41 @@ int soc_clk_dump(void)
 	return 0;
 }
 
+struct clk_ops ast2600_clk_ops = {
+	.get_rate = ast2600_clk_get_rate,
+	.set_rate = ast2600_clk_set_rate,
+	.enable = ast2600_clk_enable,
+};
+
+static int ast2600_clk_probe(struct udevice *dev)
+{
+	struct ast2600_clk_priv *priv = dev_get_priv(dev);
+
+	priv->scu = devfdt_get_addr_ptr(dev);
+	if (IS_ERR(priv->scu))
+		return PTR_ERR(priv->scu);
+
+	ast2600_init_rgmii_clk(priv->scu, &rgmii_clk_defconfig);
+	ast2600_init_rmii_clk(priv->scu, &rmii_clk_defconfig);
+	ast2600_configure_mac12_clk(priv->scu);
+	ast2600_configure_mac34_clk(priv->scu);
+	ast2600_configure_rsa_ecc_clk(priv->scu);
+
+	return 0;
+}
+
+static int ast2600_clk_bind(struct udevice *dev)
+{
+	int ret;
+
+	/* The reset driver does not have a device node, so bind it here */
+	ret = device_bind_driver(gd->dm_root, "ast_sysreset", "reset", &dev);
+	if (ret)
+		debug("Warning: No reset driver: ret=%d\n", ret);
+
+	return 0;
+}
+
 static const struct udevice_id ast2600_clk_ids[] = {
 	{ .compatible = "aspeed,ast2600-scu", },
 	{ },
-- 
2.34.1



More information about the U-Boot mailing list