[PATCH v3 21/43] pci: Support autoconfig in SPL

[Simon Glass]

Allow PCI autoconfig to be handled in SPL, so that we can set it up
correctly for boards which need to do this before U-Boot proper. This
includes qemu-x64_64 which needs to set up the video device while in
32-bit mode.

Signed-off-by: Simon Glass <sjg at chromium.org>
---

(no changes since v1)

 drivers/pci/Kconfig      |  8 ++++++++
 drivers/pci/pci-uclass.c | 10 +++++++++-
 2 files changed, 17 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index ef328d26525..165f111a4f5 100644
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -40,6 +40,14 @@ config PCI_PNP
 	help
 	  Enable PCI memory and I/O space resource allocation and assignment.
 
+config SPL_PCI_PNP
+	bool "Enable Plug & Play support for PCI"
+	help
+	  Enable PCI memory and I/O space resource allocation and assignment.
+	  This is normally not done in SPL, but can be enabled if devices must
+	  be set up in the SPL phase. Often it is enough to manually configure
+	  one device, so this option can be disabled.
+
 config PCI_REGION_MULTI_ENTRY
 	bool "Enable Multiple entries of region type MEMORY in ranges for PCI"
 	help
diff --git a/drivers/pci/pci-uclass.c b/drivers/pci/pci-uclass.c
index 8d27e40338c..632c1a63cfc 100644
--- a/drivers/pci/pci-uclass.c
+++ b/drivers/pci/pci-uclass.c
@@ -13,6 +13,7 @@
 #include <log.h>
 #include <malloc.h>
 #include <pci.h>
+#include <spl.h>
 #include <asm/global_data.h>
 #include <asm/io.h>
 #include <dm/device-internal.h>
@@ -722,6 +723,9 @@ static bool pci_need_device_pre_reloc(struct udevice *bus, uint vendor,
 	u32 vendev;
 	int index;
 
+	if (spl_phase() == PHASE_SPL && CONFIG_IS_ENABLED(PCI_PNP))
+		return true;
+
 	for (index = 0;
 	     !dev_read_u32_index(bus, "u-boot,pci-pre-reloc", index,
 				 &vendev);
@@ -793,7 +797,9 @@ static int pci_find_and_bind_driver(struct udevice *parent,
 			 * space is pretty limited (ie: using Cache As RAM).
 			 */
 			if (!(gd->flags & GD_FLG_RELOC) &&
-			    !(drv->flags & DM_FLAG_PRE_RELOC))
+			    !(drv->flags & DM_FLAG_PRE_RELOC) &&
+			    (!CONFIG_IS_ENABLED(PCI_PNP) ||
+			     spl_phase() != PHASE_SPL))
 				return log_msg_ret("pre", -EPERM);
 
 			/*
@@ -918,6 +924,8 @@ int pci_bind_bus_devices(struct udevice *bus)
 			}
 			ret = pci_find_and_bind_driver(bus, &find_id, bdf,
 						       &dev);
+		} else {
+			debug("device: %s\n", dev->name);
 		}
 		if (ret == -EPERM)
 			continue;
-- 
2.40.1.521.gf1e218fcd8-goog