[PATCH v3 25/43] x86: Pass video settings from SPL to U-Boot proper

Simon Glass sjg at chromium.org
Fri May 5 00:58:11 CEST 2023


When video is set up in SPL, U-Boot proper needs to use the correct
parameters so it can write to the display.

Put these in a bloblist so they are available to U-Boot proper.

Signed-off-by: Simon Glass <sjg at chromium.org>
---

Changes in v3:
- Add a tag name for the blob

 common/bloblist.c     |  1 +
 drivers/pci/pci_rom.c | 78 +++++++++++++++++++++++++++++++------------
 include/bloblist.h    |  1 +
 include/video.h       | 24 +++++++++++++
 4 files changed, 83 insertions(+), 21 deletions(-)

diff --git a/common/bloblist.c b/common/bloblist.c
index 0d63b6e8817..2144b10e1d0 100644
--- a/common/bloblist.c
+++ b/common/bloblist.c
@@ -51,6 +51,7 @@ static struct tag_name {
 
 	/* BLOBLISTT_PROJECT_AREA */
 	{ BLOBLISTT_U_BOOT_SPL_HANDOFF, "SPL hand-off" },
+	{ BLOBLISTT_U_BOOT_VIDEO, "SPL video handoff" },
 
 	/* BLOBLISTT_VENDOR_AREA */
 };
diff --git a/drivers/pci/pci_rom.c b/drivers/pci/pci_rom.c
index 2d9a2a899ef..ecb6da64c5c 100644
--- a/drivers/pci/pci_rom.c
+++ b/drivers/pci/pci_rom.c
@@ -26,6 +26,7 @@
 
 #include <common.h>
 #include <bios_emul.h>
+#include <bloblist.h>
 #include <bootstage.h>
 #include <dm.h>
 #include <errno.h>
@@ -34,6 +35,7 @@
 #include <malloc.h>
 #include <pci.h>
 #include <pci_rom.h>
+#include <spl.h>
 #include <vesa.h>
 #include <video.h>
 #include <acpi/acpi_s3.h>
@@ -420,34 +422,68 @@ int vesa_setup_video(struct udevice *dev, int (*int15_handler)(void))
 		printf("Not available (previous bootloader prevents it)\n");
 		return -EPERM;
 	}
-	bootstage_start(BOOTSTAGE_ID_ACCUM_LCD, "vesa display");
-	ret = dm_pci_run_vga_bios(dev, int15_handler, PCI_ROM_USE_NATIVE |
-					PCI_ROM_ALLOW_FALLBACK);
-	bootstage_accum(BOOTSTAGE_ID_ACCUM_LCD);
-	if (ret) {
-		debug("failed to run video BIOS: %d\n", ret);
-		return ret;
-	}
 
-	ret = vesa_setup_video_priv(&mode_info.vesa,
-				    mode_info.vesa.phys_base_ptr, uc_priv,
-				    plat);
-	if (ret) {
-		if (ret == -ENFILE) {
-			/*
-			 * See video-uclass.c for how to set up reserved memory
-			 * in your video driver
-			 */
-			log_err("CONFIG_VIDEO_COPY enabled but driver '%s' set up no reserved memory\n",
-				dev->driver->name);
+	/* In U-Boot proper, collect the information added by SPL (see below) */
+	if (IS_ENABLED(CONFIG_SPL_VIDEO) && spl_phase() > PHASE_SPL &&
+	    CONFIG_IS_ENABLED(BLOBLIST)) {
+		struct video_handoff *ho;
+
+		ho = bloblist_find(BLOBLISTT_U_BOOT_VIDEO, sizeof(*ho));
+		if (!ho)
+			return log_msg_ret("blf", -ENOENT);
+		plat->base = ho->fb;
+		plat->size = ho->size;
+		uc_priv->xsize = ho->xsize;
+		uc_priv->ysize = ho->ysize;
+		uc_priv->line_length = ho->line_length;
+		uc_priv->bpix = ho->bpix;
+	} else {
+		bootstage_start(BOOTSTAGE_ID_ACCUM_LCD, "vesa display");
+		ret = dm_pci_run_vga_bios(dev, int15_handler,
+					  PCI_ROM_USE_NATIVE |
+					  PCI_ROM_ALLOW_FALLBACK);
+		bootstage_accum(BOOTSTAGE_ID_ACCUM_LCD);
+		if (ret) {
+			debug("failed to run video BIOS: %d\n", ret);
+			return ret;
 		}
 
-		debug("No video mode configured\n");
-		return ret;
+		ret = vesa_setup_video_priv(&mode_info.vesa,
+					    mode_info.vesa.phys_base_ptr,
+					    uc_priv, plat);
+		if (ret) {
+			if (ret == -ENFILE) {
+				/*
+				 * See video-uclass.c for how to set up reserved
+				 * memory in your video driver
+				 */
+				log_err("CONFIG_VIDEO_COPY enabled but driver '%s' set up no reserved memory\n",
+					dev->driver->name);
+			}
+
+			debug("No video mode configured\n");
+			return ret;
+		}
 	}
 
 	printf("Video: %dx%dx%d\n", uc_priv->xsize, uc_priv->ysize,
 	       mode_info.vesa.bits_per_pixel);
 
+	/* In SPL, store the information for use by U-Boot proper */
+	if (spl_phase() == PHASE_SPL && CONFIG_IS_ENABLED(BLOBLIST)) {
+		struct video_handoff *ho;
+
+		ho = bloblist_add(BLOBLISTT_U_BOOT_VIDEO, sizeof(*ho), 0);
+		if (!ho)
+			return log_msg_ret("blc", -ENOMEM);
+
+		ho->fb = plat->base;
+		ho->size = plat->size;
+		ho->xsize = uc_priv->xsize;
+		ho->ysize = uc_priv->ysize;
+		ho->line_length = uc_priv->line_length;
+		ho->bpix = uc_priv->bpix;
+	}
+
 	return 0;
 }
diff --git a/include/bloblist.h b/include/bloblist.h
index 2a2f1700eb0..7ea72c6bd46 100644
--- a/include/bloblist.h
+++ b/include/bloblist.h
@@ -113,6 +113,7 @@ enum bloblist_tag_t {
 	BLOBLISTT_PROJECT_AREA = 0x8000,
 	BLOBLISTT_U_BOOT_SPL_HANDOFF = 0x8000, /* Hand-off info from SPL */
 	BLOBLISTT_VBE		= 0x8001,	/* VBE per-phase state */
+	BLOBLISTT_U_BOOT_VIDEO = 0x8002, /* Video information from SPL */
 
 	/*
 	 * Vendor-specific tags are permitted here. Projects can be open source
diff --git a/include/video.h b/include/video.h
index 29c4f51efb0..18ed159b8d8 100644
--- a/include/video.h
+++ b/include/video.h
@@ -133,6 +133,30 @@ struct video_ops {
 
 #define video_get_ops(dev)        ((struct video_ops *)(dev)->driver->ops)
 
+/**
+ * struct video_handoff - video information passed from SPL
+ *
+ * This is used when video is set up by SPL, to provide the details to U-Boot
+ * proper.
+ *
+ * @fb: Base address of frame buffer, 0 if not yet known
+ * @size: Frame-buffer size, in bytes
+ * @xsize:	Number of pixel columns (e.g. 1366)
+ * @ysize:	Number of pixels rows (e.g.. 768)
+ * @line_length:	Length of each frame buffer line, in bytes. This can be
+ *		set by the driver, but if not, the uclass will set it after
+ *		probing
+ * @bpix:	Encoded bits per pixel (enum video_log2_bpp)
+ */
+struct video_handoff {
+	u64 fb;
+	u32 size;
+	ushort xsize;
+	ushort ysize;
+	u32 line_length;
+	u8 bpix;
+};
+
 /** enum colour_idx - the 16 colors supported by consoles */
 enum colour_idx {
 	VID_BLACK = 0,
-- 
2.40.1.521.gf1e218fcd8-goog



More information about the U-Boot mailing list