[PATCH v2 2/3] X86: Add support for distro boot
Simon Glass
sjg at chromium.org
Fri May 5 02:41:10 CEST 2023
Hi Mittelstaedt,
On Wed, 3 May 2023 at 23:40, Mittelstaedt Thomas (XC-CT/EBV3)
<Thomas.Mittelstaedt at de.bosch.com> wrote:
>
> Hello Simon,
>
> I've tried out successfully the option (with BOOTSTD_FULL, with BOOTSTD_DEFAULT it's not possible to boot) and will provide a changed patch set soon.
>
Thank you for testing. What goes wrong without BOOTSTD_FULL?
Regards,
Simon
>
>
> Mit freundlichen Grüßen / Best regards
>
> Thomas Mittelstaedt
>
> Cross-Domain Computing Solutions
>
>
> > -----Ursprüngliche Nachricht-----
> > Von: Simon Glass <sjg at chromium.org>
> > Gesendet: Dienstag, 2. Mai 2023 19:12
> > An: Heinrich Schuchardt <xypron.glpk at gmx.de>
> > Cc: Mittelstaedt Thomas (XC-CT/EBV3) <thomas.mittelstaedt at de.bosch.com>;
> > u-boot at lists.denx.de; Niel Armstrong <neil.armstrong at linaro.org>; Patrick
> > Delaunay <patrick.delaunay at foss.st.com>; Ramon Fried
> > <rfried.dev at gmail.com>; Marek Vasut <marex at denx.de>; Manuel Traut
> > <manuel.traut at mt.com>; Bin Meng <bmeng.cn at gmail.com>
> > Betreff: Re: [PATCH v2 2/3] X86: Add support for distro boot
> >
> > Hi,
> >
> > On Tue, 2 May 2023 at 09:41, Heinrich Schuchardt <xypron.glpk at gmx.de> wrote:
> > >
> > >
> > >
> > > Am 2. Mai 2023 17:21:29 MESZ schrieb thomas.mittelstaedt at de.bosch.com:
> > > >From: Thomas Mittelstaedt <thomas.mittelstaedt at de.bosch.com>
> > > >
> > > >Enable distro boot feature for U-Boot at VirtualBox described at
> > > >https://sou/
> > > >rce.denx.de%2Fu-boot%2Fu-boot%2F-
> > %2Fblob%2Fmaster%2Fdoc%2Fdevelop%2Fd
> > >
> > >istro.rst&data=05%7C01%7Cthomas.mittelstaedt%40de.bosch.com%7Ca52180e
> > >
> > >e6e8f4087da4d08db4b306953%7C0ae51e1907c84e4bbb6d648ee58410f4%7C0%
> > 7C0%
> > >
> > >7C638186443515155378%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAw
> > MDAiLCJQ
> > >
> > >IjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata
> > =4TSv
> > > >yIZMiz4Tt7Wt36NxQR576tg%2F9cS%2FVyZS83xwN50%3D&reserved=0
> > > >
> > > >Signed-off-by: Thomas Mittelstaedt <thomas.mittelstaedt at bosch.com>
> > > >---
> > > > configs/efi-x86_payload64_defconfig | 12 +-----------
> > > > include/configs/efi-x86_payload.h | 11 +++++++++++
> > > > 2 files changed, 12 insertions(+), 11 deletions(-)
> > > >
> > > >diff --git a/configs/efi-x86_payload64_defconfig
> > > >b/configs/efi-x86_payload64_defconfig
> > > >index 30a7f31dac..a4cfe95890 100644
> > > >--- a/configs/efi-x86_payload64_defconfig
> > > >+++ b/configs/efi-x86_payload64_defconfig
> > > >@@ -8,33 +8,23 @@ CONFIG_TARGET_EFI_PAYLOAD=y CONFIG_FIT=y
> > > >CONFIG_FIT_SIGNATURE=y CONFIG_LEGACY_IMAGE_FORMAT=y
> > > >+CONFIG_DISTRO_DEFAULTS=y
> > > > CONFIG_SHOW_BOOT_PROGRESS=y
> > > > CONFIG_USE_BOOTARGS=y
> > > > CONFIG_BOOTARGS="root=/dev/sdb3 init=/sbin/init rootwait ro"
> > > >-CONFIG_USE_BOOTCOMMAND=y
> > > > CONFIG_PRE_CONSOLE_BUFFER=y
> > > > CONFIG_SYS_CONSOLE_INFO_QUIET=y
> > > > CONFIG_DISPLAY_BOARDINFO_LATE=y
> > > > CONFIG_LAST_STAGE_INIT=y
> > > >-CONFIG_HUSH_PARSER=y
> > > > CONFIG_SYS_PBSIZE=532
> > > > CONFIG_CMD_IDE=y
> > > > CONFIG_CMD_MMC=y
> > > >-CONFIG_CMD_PART=y
> > > > CONFIG_CMD_USB=y
> > > >-CONFIG_CMD_DHCP=y
> > > > CONFIG_BOOTP_BOOTFILESIZE=y
> > > > # CONFIG_CMD_NFS is not set
> > > >-CONFIG_CMD_PING=y
> > > > CONFIG_CMD_TIME=y
> > > >-CONFIG_CMD_EXT2=y
> > > >-CONFIG_CMD_EXT4=y
> > > > CONFIG_CMD_EXT4_WRITE=y
> > > >-CONFIG_CMD_FAT=y
> > > >-CONFIG_CMD_FS_GENERIC=y
> > > > CONFIG_MAC_PARTITION=y
> > > >-CONFIG_ISO_PARTITION=y
> > > >-CONFIG_EFI_PARTITION=y
> > > > CONFIG_ENV_OVERWRITE=y
> > > > CONFIG_ENV_IS_IN_FAT=y
> > > > CONFIG_ENV_FAT_INTERFACE="scsi"
> > > >diff --git a/include/configs/efi-x86_payload.h
> > > >b/include/configs/efi-x86_payload.h
> > > >index c72b067c36..e1cd8eb316 100644
> > > >--- a/include/configs/efi-x86_payload.h
> > > >+++ b/include/configs/efi-x86_payload.h
> > > >@@ -6,6 +6,17 @@
> > > > /*
> > > > * board/config.h - configuration options, board specific
> > > > */
> > > >+#ifndef CONFIG_SPL_BUILD
> > > >+
> > > >+#define BOOT_TARGET_SCSI(func) \
> > >
> > > Shouldn't NVMe be added here too?
> >
> > This is automatic if you use bootstd.
> >
> > >
> > > Best regards
> > >
> > > Heinrich
> > >
> > > >+ func(SCSI, scsi, 0)
> > > >+
> > > >+#define BOOT_TARGET_DEVICES(func) \
> > > >+ BOOT_TARGET_SCSI(func)
> > > >+
> > > >+#include <config_distro_bootcmd.h>
> > > >+
> > > >+#endif
> > > >
> > > > #ifndef __CONFIG_H
> > > > #define __CONFIG_H
> >
> > Please can we use bootstd instead?
> >
> > You should just need to enable BOOTSTD_DEFAULTS and it will work. If not,
> > please let me know.
> >
> > Please also see the various improvements in[1] available at [2]. There is also a
> > new video driver [2].
> >
> > Regards,
> > Simon
> >
> > [1]
> > https://patchwork.o/
> > zlabs.org%2Fproject%2Fuboot%2Flist%2F%3Fseries%3D351440&data=05%7C01
> > %7Cthomas.mittelstaedt%40de.bosch.com%7Ca52180ee6e8f4087da4d08db4b306
> > 953%7C0ae51e1907c84e4bbb6d648ee58410f4%7C0%7C0%7C6381864435151553
> > 78%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiL
> > CJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=yjqyizWXqb
> > YZmSuzfvqq4EfYvJYqXUf6irbLYhLo4qk%3D&reserved=0
> > [2]
> > https://source.denx/
> > .de%2Fu-boot%2Fcustodians%2Fu-boot-dm%2F-%2Ftree%2Fbryc-
> > working&data=05%7C01%7Cthomas.mittelstaedt%40de.bosch.com%7Ca52180ee
> > 6e8f4087da4d08db4b306953%7C0ae51e1907c84e4bbb6d648ee58410f4%7C0%7C
> > 0%7C638186443515155378%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjA
> > wMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C
> > %7C&sdata=5OF%2Bmc%2FVOSFFTzLp3JLrWBxvuZCfqwQDb3GzDZGlvws%3
> > D&reserved=0
> > [3]
> > https://patchwork.o/
> > zlabs.org%2Fproject%2Fuboot%2Flist%2F%3Fseries%3D352929&data=05%7C01
> > %7Cthomas.mittelstaedt%40de.bosch.com%7Ca52180ee6e8f4087da4d08db4b306
> > 953%7C0ae51e1907c84e4bbb6d648ee58410f4%7C0%7C0%7C6381864435151553
> > 78%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiL
> > CJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=VthFwiSeQt
> > 7c%2B%2F0twxRZTYu4smkJJDL18CkrST4mhiQ%3D&reserved=0
More information about the U-Boot
mailing list