[RFC PATCH v2 1/5] ARM: dts: Add Amlogic Meson A1 DT from Linux 6.3-rc7

Igor Prusov ivprusov at sberdevices.ru
Fri May 5 14:56:35 CEST 2023


Import Linux 6.3-rc7 Device tree and necessary bindings for Amlogic A1
board from 6a8f57ae2eb0 ("Linux 6.3-rc7").

Signed-off-by: Igor Prusov <ivprusov at sberdevices.ru>
Reviewed-by: Neil Armstrong <neil.armstrong at linaro.org>
---
 arch/arm/dts/meson-a1.dtsi               | 161 +++++++++++++++++++++++
 include/dt-bindings/gpio/meson-a1-gpio.h |  73 ++++++++++
 2 files changed, 234 insertions(+)
 create mode 100644 arch/arm/dts/meson-a1.dtsi
 create mode 100644 include/dt-bindings/gpio/meson-a1-gpio.h

diff --git a/arch/arm/dts/meson-a1.dtsi b/arch/arm/dts/meson-a1.dtsi
new file mode 100644
index 0000000000..6509329b85
--- /dev/null
+++ b/arch/arm/dts/meson-a1.dtsi
@@ -0,0 +1,161 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Amlogic, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/meson-a1-gpio.h>
+
+/ {
+	compatible = "amlogic,a1";
+
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu0: cpu at 0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x0>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+		};
+
+		cpu1: cpu at 1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a35";
+			reg = <0x0 0x1>;
+			enable-method = "psci";
+			next-level-cache = <&l2>;
+		};
+
+		l2: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0x0 0x800000>;
+			alignment = <0x0 0x400000>;
+			linux,cma-default;
+		};
+	};
+
+	sm: secure-monitor {
+		compatible = "amlogic,meson-gxbb-sm";
+
+		pwrc: power-controller {
+			compatible = "amlogic,meson-a1-pwrc";
+			#power-domain-cells = <1>;
+			status = "okay";
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		apb: bus at fe000000 {
+			compatible = "simple-bus";
+			reg = <0x0 0xfe000000 0x0 0x1000000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x1000000>;
+
+			reset: reset-controller at 0 {
+				compatible = "amlogic,meson-a1-reset";
+				reg = <0x0 0x0 0x0 0x8c>;
+				#reset-cells = <1>;
+			};
+
+			periphs_pinctrl: pinctrl at 400 {
+				compatible = "amlogic,meson-a1-periphs-pinctrl";
+				#address-cells = <2>;
+				#size-cells = <2>;
+				ranges;
+
+				gpio: bank at 400 {
+					reg = <0x0 0x0400 0x0 0x003c>,
+					      <0x0 0x0480 0x0 0x0118>;
+					reg-names = "mux", "gpio";
+					gpio-controller;
+					#gpio-cells = <2>;
+					gpio-ranges = <&periphs_pinctrl 0 0 62>;
+				};
+
+			};
+
+			uart_AO: serial at 1c00 {
+				compatible = "amlogic,meson-gx-uart",
+					     "amlogic,meson-ao-uart";
+				reg = <0x0 0x1c00 0x0 0x18>;
+				interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>, <&xtal>, <&xtal>;
+				clock-names = "xtal", "pclk", "baud";
+				status = "disabled";
+			};
+
+			uart_AO_B: serial at 2000 {
+				compatible = "amlogic,meson-gx-uart",
+					     "amlogic,meson-ao-uart";
+				reg = <0x0 0x2000 0x0 0x18>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal>, <&xtal>, <&xtal>;
+				clock-names = "xtal", "pclk", "baud";
+				status = "disabled";
+			};
+		};
+
+		gic: interrupt-controller at ff901000 {
+			compatible = "arm,gic-400";
+			reg = <0x0 0xff901000 0x0 0x1000>,
+			      <0x0 0xff902000 0x0 0x2000>,
+			      <0x0 0xff904000 0x0 0x2000>,
+			      <0x0 0xff906000 0x0 0x2000>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9
+				(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+			(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	xtal: xtal-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "xtal";
+		#clock-cells = <0>;
+	};
+};
diff --git a/include/dt-bindings/gpio/meson-a1-gpio.h b/include/dt-bindings/gpio/meson-a1-gpio.h
new file mode 100644
index 0000000000..40e57a5ff1
--- /dev/null
+++ b/include/dt-bindings/gpio/meson-a1-gpio.h
@@ -0,0 +1,73 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Copyright (c) 2019 Amlogic, Inc. All rights reserved.
+ * Author: Qianggui Song <qianggui.song at amlogic.com>
+ */
+
+#ifndef _DT_BINDINGS_MESON_A1_GPIO_H
+#define _DT_BINDINGS_MESON_A1_GPIO_H
+
+#define GPIOP_0		0
+#define GPIOP_1		1
+#define GPIOP_2		2
+#define GPIOP_3		3
+#define GPIOP_4		4
+#define GPIOP_5		5
+#define GPIOP_6		6
+#define GPIOP_7		7
+#define GPIOP_8		8
+#define GPIOP_9		9
+#define GPIOP_10	10
+#define GPIOP_11	11
+#define GPIOP_12	12
+#define GPIOB_0		13
+#define GPIOB_1		14
+#define GPIOB_2		15
+#define GPIOB_3		16
+#define GPIOB_4		17
+#define GPIOB_5		18
+#define GPIOB_6		19
+#define GPIOX_0		20
+#define GPIOX_1		21
+#define GPIOX_2		22
+#define GPIOX_3		23
+#define GPIOX_4		24
+#define GPIOX_5		25
+#define GPIOX_6		26
+#define GPIOX_7		27
+#define GPIOX_8		28
+#define GPIOX_9		29
+#define GPIOX_10	30
+#define GPIOX_11	31
+#define GPIOX_12	32
+#define GPIOX_13	33
+#define GPIOX_14	34
+#define GPIOX_15	35
+#define GPIOX_16	36
+#define GPIOF_0		37
+#define GPIOF_1		38
+#define GPIOF_2		39
+#define GPIOF_3		40
+#define GPIOF_4		41
+#define GPIOF_5		42
+#define GPIOF_6		43
+#define GPIOF_7		44
+#define GPIOF_8		45
+#define GPIOF_9		46
+#define GPIOF_10	47
+#define GPIOF_11	48
+#define GPIOF_12	49
+#define GPIOA_0		50
+#define GPIOA_1		51
+#define GPIOA_2		52
+#define GPIOA_3		53
+#define GPIOA_4		54
+#define GPIOA_5		55
+#define GPIOA_6		56
+#define GPIOA_7		57
+#define GPIOA_8		58
+#define GPIOA_9		59
+#define GPIOA_10	60
+#define GPIOA_11	61
+
+#endif /* _DT_BINDINGS_MESON_A1_GPIO_H */
-- 
2.34.1



More information about the U-Boot mailing list