[PATCH 5/6] net: add fastboot TCP documentation and IP6-only mode

[Dmitrii Merkurev]

Command to start IP6 only TCP fastboot:
fastboot tcp -ipv6

Signed-off-by: Dmitrii Merkurev <dimorinny at google.com>
Cc: Ying-Chun Liu (PaulLiu) <paul.liu at linaro.org>
Cc: Simon Glass <sjg at chromium.org>
Сс: Joe Hershberger <joe.hershberger at ni.com>
Сс: Ramon Fried <rfried.dev at gmail.com>
---
 cmd/fastboot.c           | 29 +++++++++++++++++++++++++----
 doc/android/fastboot.rst |  8 +++++++-
 2 files changed, 32 insertions(+), 5 deletions(-)

diff --git a/cmd/fastboot.c b/cmd/fastboot.c
index 3d5ff951eb..36f744ae01 100644
--- a/cmd/fastboot.c
+++ b/cmd/fastboot.c
@@ -12,6 +12,7 @@
 #include <g_dnl.h>
 #include <fastboot.h>
 #include <net.h>
+#include <net6.h>
 #include <usb.h>
 #include <watchdog.h>
 #include <linux/stringify.h>
@@ -121,10 +122,23 @@ static int do_fastboot(struct cmd_tbl *cmdtp, int flag, int argc,
 {
 	uintptr_t buf_addr = (uintptr_t)NULL;
 	size_t buf_size = 0;
+	bool is_ipv6_only = false;
+	bool is_usb = false;
+	bool is_udp = false;
+	bool is_tcp = false;
 
 	if (argc < 2)
 		return CMD_RET_USAGE;
 
+	if (IS_ENABLED(CONFIG_IPV6)) {
+		use_ip6 = false;
+		/* IPv6 parameter has to be always *last* */
+		if (!strcmp(argv[argc - 1], USE_IP6_CMD_PARAM)) {
+			is_ipv6_only = true;
+			--argc;
+		}
+	}
+
 	while (argc > 1 && **(argv + 1) == '-') {
 		char *arg = *++argv;
 
@@ -159,11 +173,18 @@ NXTARG:
 
 	fastboot_init((void *)buf_addr, buf_size);
 
-	if (!strcmp(argv[1], "udp"))
+	is_usb = strcmp(argv[1], "usb") == 0;
+	is_udp = strcmp(argv[1], "udp") == 0;
+	is_tcp = strcmp(argv[1], "tcp") == 0;
+
+	if (is_ipv6_only && is_tcp)
+		use_ip6 = true;
+
+	if (is_udp)
 		return do_fastboot_udp(argc, argv, buf_addr, buf_size);
-	if (!strcmp(argv[1], "tcp"))
+	if (is_tcp)
 		return do_fastboot_tcp(argc, argv, buf_addr, buf_size);
-	if (!strcmp(argv[1], "usb")) {
+	if (is_usb) {
 		argv++;
 		argc--;
 	}
@@ -174,7 +195,7 @@ NXTARG:
 U_BOOT_CMD(
 	fastboot, CONFIG_SYS_MAXARGS, 1, do_fastboot,
 	"run as a fastboot usb or udp device",
-	"[-l addr] [-s size] usb <controller> | udp\n"
+	"[-l addr] [-s size] usb <controller> | udp [-ipv6] | tcp [-ipv6]\n"
 	"\taddr - address of buffer used during data transfers ("
 	__stringify(CONFIG_FASTBOOT_BUF_ADDR) ")\n"
 	"\tsize - size of buffer used during data transfers ("
diff --git a/doc/android/fastboot.rst b/doc/android/fastboot.rst
index 1ad8a897c8..aa6e9e5a9e 100644
--- a/doc/android/fastboot.rst
+++ b/doc/android/fastboot.rst
@@ -181,13 +181,19 @@ Enter into fastboot by executing the fastboot command in U-Boot for either USB::
 
    => fastboot usb 0
 
-or UDP::
+UDP::
 
    => fastboot udp
    link up on port 0, speed 100, full duplex
    Using ethernet at 4a100000 device
    Listening for fastboot command on 192.168.0.102
 
+or TCP::
+
+   => fastboot tcp
+   Using ethernet at 4a100000 device
+   Listening for fastboot command on 192.168.0.102
+
 On the client side you can fetch the bootloader version for instance::
 
    $ fastboot getvar version-bootloader
-- 
2.40.1.521.gf1e218fcd8-goog