[PATCH v5 4/6] phy: remove phy-supply related code

neil.armstrong at linaro.org neil.armstrong at linaro.org
Tue May 9 09:53:42 CEST 2023


On 19/04/2023 15:40, Eugen Hristev wrote:
> phy-supply is now handled at uclass level. Remove it from the drivers that
> implement it at the driver level.
> 
> Suggested-by: Jonas Karlman <jonas at kwiboo.se>
> Signed-off-by: Eugen Hristev <eugen.hristev at collabora.com>
> ---
>   drivers/phy/meson-g12a-usb2.c | 48 -----------------------------------
>   drivers/phy/meson-gxbb-usb2.c | 38 ---------------------------
>   drivers/phy/meson-gxl-usb2.c  | 30 ----------------------
>   3 files changed, 116 deletions(-)
> 
> diff --git a/drivers/phy/meson-g12a-usb2.c b/drivers/phy/meson-g12a-usb2.c
> index 2fbba7fdae01..650b88bd1803 100644
> --- a/drivers/phy/meson-g12a-usb2.c
> +++ b/drivers/phy/meson-g12a-usb2.c
> @@ -54,50 +54,12 @@
>   
>   struct phy_meson_g12a_usb2_priv {
>   	struct regmap		*regmap;
> -#if CONFIG_IS_ENABLED(DM_REGULATOR)
> -	struct udevice		*phy_supply;
> -#endif
>   #if CONFIG_IS_ENABLED(CLK)
>   	struct clk		clk;
>   #endif
>   	struct reset_ctl	reset;
>   };
>   
> -
> -static int phy_meson_g12a_usb2_power_on(struct phy *phy)
> -{
> -#if CONFIG_IS_ENABLED(DM_REGULATOR)
> -	struct udevice *dev = phy->dev;
> -	struct phy_meson_g12a_usb2_priv *priv = dev_get_priv(dev);
> -
> -	if (priv->phy_supply) {
> -		int ret = regulator_set_enable(priv->phy_supply, true);
> -		if (ret)
> -			return ret;
> -	}
> -#endif
> -
> -	return 0;
> -}
> -
> -static int phy_meson_g12a_usb2_power_off(struct phy *phy)
> -{
> -#if CONFIG_IS_ENABLED(DM_REGULATOR)
> -	struct udevice *dev = phy->dev;
> -	struct phy_meson_g12a_usb2_priv *priv = dev_get_priv(dev);
> -
> -	if (priv->phy_supply) {
> -		int ret = regulator_set_enable(priv->phy_supply, false);
> -		if (ret) {
> -			pr_err("Error disabling PHY supply\n");
> -			return ret;
> -		}
> -	}
> -#endif
> -
> -	return 0;
> -}
> -
>   static int phy_meson_g12a_usb2_init(struct phy *phy)
>   {
>   	struct udevice *dev = phy->dev;
> @@ -155,8 +117,6 @@ static int phy_meson_g12a_usb2_exit(struct phy *phy)
>   struct phy_ops meson_g12a_usb2_phy_ops = {
>   	.init = phy_meson_g12a_usb2_init,
>   	.exit = phy_meson_g12a_usb2_exit,
> -	.power_on = phy_meson_g12a_usb2_power_on,
> -	.power_off = phy_meson_g12a_usb2_power_off,
>   };
>   
>   int meson_g12a_usb2_phy_probe(struct udevice *dev)
> @@ -193,14 +153,6 @@ int meson_g12a_usb2_phy_probe(struct udevice *dev)
>   	}
>   #endif
>   
> -#if CONFIG_IS_ENABLED(DM_REGULATOR)
> -	ret = device_get_supply_regulator(dev, "phy-supply", &priv->phy_supply);
> -	if (ret && ret != -ENOENT) {
> -		pr_err("Failed to get PHY regulator\n");
> -		return ret;
> -	}
> -#endif
> -
>   	return 0;
>   }
>   
> diff --git a/drivers/phy/meson-gxbb-usb2.c b/drivers/phy/meson-gxbb-usb2.c
> index 7a2e3d2739e8..70a80b863819 100644
> --- a/drivers/phy/meson-gxbb-usb2.c
> +++ b/drivers/phy/meson-gxbb-usb2.c
> @@ -12,7 +12,6 @@
>   #include <clk.h>
>   #include <dm.h>
>   #include <generic-phy.h>
> -#include <power/regulator.h>
>   #include <regmap.h>
>   #include <reset.h>
>   #include <linux/bitops.h>
> @@ -81,9 +80,6 @@
>   struct phy_meson_gxbb_usb2_priv {
>   	struct regmap *regmap;
>   	struct reset_ctl_bulk resets;
> -#if CONFIG_IS_ENABLED(DM_REGULATOR)
> -	struct udevice *phy_supply;
> -#endif
>   };
>   
>   static int phy_meson_gxbb_usb2_power_on(struct phy *phy)
> @@ -92,15 +88,6 @@ static int phy_meson_gxbb_usb2_power_on(struct phy *phy)
>   	struct phy_meson_gxbb_usb2_priv *priv = dev_get_priv(dev);
>   	uint val;
>   
> -#if CONFIG_IS_ENABLED(DM_REGULATOR)
> -	if (priv->phy_supply) {
> -		int ret = regulator_set_enable(priv->phy_supply, true);
> -
> -		if (ret)
> -			return ret;
> -	}
> -#endif
> -
>   	regmap_update_bits(priv->regmap, REG_CONFIG,
>   			   REG_CONFIG_CLK_32k_ALTSEL,
>   			   REG_CONFIG_CLK_32k_ALTSEL);
> @@ -140,26 +127,8 @@ static int phy_meson_gxbb_usb2_power_on(struct phy *phy)
>   	return 0;
>   }
>   
> -static int phy_meson_gxbb_usb2_power_off(struct phy *phy)
> -{
> -#if CONFIG_IS_ENABLED(DM_REGULATOR)
> -	struct udevice *dev = phy->dev;
> -	struct phy_meson_gxbb_usb2_priv *priv = dev_get_priv(dev);
> -
> -	if (priv->phy_supply) {
> -		int ret = regulator_set_enable(priv->phy_supply, false);
> -
> -		if (ret)
> -			return ret;
> -	}
> -#endif
> -
> -	return 0;
> -}
> -
>   static struct phy_ops meson_gxbb_usb2_phy_ops = {
>   	.power_on = phy_meson_gxbb_usb2_power_on,
> -	.power_off = phy_meson_gxbb_usb2_power_off,
>   };
>   
>   static int meson_gxbb_usb2_phy_probe(struct udevice *dev)
> @@ -192,13 +161,6 @@ static int meson_gxbb_usb2_phy_probe(struct udevice *dev)
>   		return ret;
>   	}
>   
> -#if CONFIG_IS_ENABLED(DM_REGULATOR)
> -	ret = device_get_supply_regulator(dev, "phy-supply", &priv->phy_supply);
> -	if (ret && ret != -ENOENT) {
> -		pr_err("Failed to get PHY regulator\n");
> -		return ret;
> -	}
> -#endif
>   	ret = reset_get_bulk(dev, &priv->resets);
>   	if (!ret) {
>   		ret = reset_deassert_bulk(&priv->resets);
> diff --git a/drivers/phy/meson-gxl-usb2.c b/drivers/phy/meson-gxl-usb2.c
> index 9fb376cec448..4c631310efac 100644
> --- a/drivers/phy/meson-gxl-usb2.c
> +++ b/drivers/phy/meson-gxl-usb2.c
> @@ -16,7 +16,6 @@
>   #include <generic-phy.h>
>   #include <regmap.h>
>   #include <linux/delay.h>
> -#include <power/regulator.h>
>   #include <clk.h>
>   #include <linux/usb/otg.h>
>   
> @@ -101,9 +100,6 @@
>   
>   struct phy_meson_gxl_usb2_priv {
>   	struct regmap		*regmap;
> -#if CONFIG_IS_ENABLED(DM_REGULATOR)
> -	struct udevice		*phy_supply;
> -#endif
>   #if CONFIG_IS_ENABLED(CLK)
>   	struct clk		clk;
>   #endif
> @@ -167,14 +163,6 @@ static int phy_meson_gxl_usb2_power_on(struct phy *phy)
>   
>   	phy_meson_gxl_usb2_set_mode(phy, USB_DR_MODE_HOST);
>   
> -#if CONFIG_IS_ENABLED(DM_REGULATOR)
> -	if (priv->phy_supply) {
> -		int ret = regulator_set_enable(priv->phy_supply, true);
> -		if (ret)
> -			return ret;
> -	}
> -#endif
> -
>   	return 0;
>   }
>   
> @@ -189,16 +177,6 @@ static int phy_meson_gxl_usb2_power_off(struct phy *phy)
>   	val |= U2P_R0_POWER_ON_RESET;
>   	regmap_write(priv->regmap, U2P_R0, val);
>   
> -#if CONFIG_IS_ENABLED(DM_REGULATOR)
> -	if (priv->phy_supply) {
> -		int ret = regulator_set_enable(priv->phy_supply, false);
> -		if (ret) {
> -			pr_err("Error disabling PHY supply\n");
> -			return ret;
> -		}
> -	}
> -#endif
> -
>   	return 0;
>   }
>   
> @@ -229,14 +207,6 @@ int meson_gxl_usb2_phy_probe(struct udevice *dev)
>   	}
>   #endif
>   
> -#if CONFIG_IS_ENABLED(DM_REGULATOR)
> -	ret = device_get_supply_regulator(dev, "phy-supply", &priv->phy_supply);
> -	if (ret && ret != -ENOENT) {
> -		pr_err("Failed to get PHY regulator\n");
> -		return ret;
> -	}
> -#endif
> -
>   	return 0;
>   }
>   

Acked-by: Neil Armstrong <neil.armstrong at linaro.org>


More information about the U-Boot mailing list