[PATCH 10/14] rockchip: rk3588-evb: Update defconfig

[Kever Yang]

On 2023/4/22 09:23, Jonas Karlman wrote:
> Update defconfig for rk3588-evb with new defaults.
>
> Add CONFIG_SPL_FIT_SIGNATURE=y to let SPL verify an auto generated hash
> of FIT images. This help indicate if there is an issue loading any of
> the images to DRAM or SRAM.
>
> Extend SPL_MAX_SIZE to 0x40000, SPL is loaded to 0x0 and TF-A is loaded
> to 0x40000, use the space in between as SPL_MAX_SIZE.
>
> Add config options to include useful gpio and regulator cmd.
>
> Remove the CONFIG_NET_RANDOM_ETHADDR=y option, ethaddr and eth1addr is
> set based on cpuid read from OTP.
>
> Disable CONFIG_SPL_MMC_SDHCI_SDMA option to use PIO to load TF-A into
> DRAM and SRAM.
>
> Remove CONFIG_DEBUG_UART_ANNOUNCE=y to remove debug messages.
>
> Add CONFIG_SYS_NS16550_MEM32=y to use 32bit access of serial register.
>
> Signed-off-by: Jonas Karlman <jonas at kwiboo.se>
Reviewed-by: Kever Yang <kever.yang at rock-chips.com>

Thanks,
- Kever
> ---
>   configs/evb-rk3588_defconfig | 9 ++++++---
>   1 file changed, 6 insertions(+), 3 deletions(-)
>
> diff --git a/configs/evb-rk3588_defconfig b/configs/evb-rk3588_defconfig
> index 8760671a1772..70e435b1f745 100644
> --- a/configs/evb-rk3588_defconfig
> +++ b/configs/evb-rk3588_defconfig
> @@ -21,12 +21,13 @@ CONFIG_SYS_LOAD_ADDR=0xc00800
>   CONFIG_DEBUG_UART=y
>   CONFIG_FIT=y
>   CONFIG_FIT_VERBOSE=y
> +CONFIG_SPL_FIT_SIGNATURE=y
>   CONFIG_SPL_LOAD_FIT=y
>   CONFIG_OF_BOARD_SETUP=y
>   CONFIG_DEFAULT_FDT_FILE="rockchip/rk3588-evb1-v10.dtb"
>   # CONFIG_DISPLAY_CPUINFO is not set
>   CONFIG_DISPLAY_BOARDINFO_LATE=y
> -CONFIG_SPL_MAX_SIZE=0x20000
> +CONFIG_SPL_MAX_SIZE=0x40000
>   CONFIG_SPL_PAD_TO=0x7f8000
>   CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
>   CONFIG_SPL_BSS_START_ADDR=0x4000000
> @@ -35,14 +36,15 @@ CONFIG_SPL_BSS_MAX_SIZE=0x4000
>   # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
>   CONFIG_SPL_STACK_R=y
>   CONFIG_SPL_ATF=y
> +CONFIG_CMD_GPIO=y
>   CONFIG_CMD_GPT=y
>   CONFIG_CMD_MMC=y
>   # CONFIG_CMD_SETEXPR is not set
> +CONFIG_CMD_REGULATOR=y
>   # CONFIG_SPL_DOS_PARTITION is not set
>   CONFIG_SPL_OF_CONTROL=y
>   CONFIG_OF_LIVE=y
>   CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
> -CONFIG_NET_RANDOM_ETHADDR=y
>   CONFIG_SPL_REGMAP=y
>   CONFIG_SPL_SYSCON=y
>   CONFIG_SPL_CLK=y
> @@ -54,6 +56,7 @@ CONFIG_MMC_DW=y
>   CONFIG_MMC_DW_ROCKCHIP=y
>   CONFIG_MMC_SDHCI=y
>   CONFIG_MMC_SDHCI_SDMA=y
> +# CONFIG_SPL_MMC_SDHCI_SDMA is not set
>   CONFIG_MMC_SDHCI_ROCKCHIP=y
>   CONFIG_ETH_DESIGNWARE=y
>   CONFIG_GMAC_ROCKCHIP=y
> @@ -62,6 +65,6 @@ CONFIG_PWM_ROCKCHIP=y
>   CONFIG_SPL_RAM=y
>   CONFIG_BAUDRATE=1500000
>   CONFIG_DEBUG_UART_SHIFT=2
> -CONFIG_DEBUG_UART_ANNOUNCE=y
> +CONFIG_SYS_NS16550_MEM32=y
>   CONFIG_SYSRESET=y
>   CONFIG_ERRNO_STR=y