[PATCH 5/5] arm: config: Adjust imx287 based XEA board PMU configuration

Lukasz Majewski lukma at denx.de
Tue May 9 16:32:43 CEST 2023


This patch adjusts XEA's PMU setup as this board is supposed to be
mainly powered from DCDC_BATT source.

Moreover, in this HW design the VDD_4P2 is not used as well.

Signed-off-by: Lukasz Majewski <lukma at denx.de>
---
 configs/imx28_xea_defconfig | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/configs/imx28_xea_defconfig b/configs/imx28_xea_defconfig
index 579545f4ed..3d92a06999 100644
--- a/configs/imx28_xea_defconfig
+++ b/configs/imx28_xea_defconfig
@@ -13,6 +13,9 @@ CONFIG_SPL_DM_SPI=y
 CONFIG_DEFAULT_DEVICE_TREE="imx28-xea"
 CONFIG_SPL_TEXT_BASE=0x1000
 CONFIG_TARGET_XEA=y
+CONFIG_SPL_MXS_PMU_MINIMAL_VDD5V_CURRENT=y
+CONFIG_SPL_MXS_PMU_DISABLE_BATT_CHARGE=y
+# CONFIG_SPL_MXS_PMU_ENABLE_4P2_LINEAR_REGULATOR is not set
 CONFIG_SPL_MMC=y
 CONFIG_SPL_SERIAL=y
 CONFIG_SPL_STACK=0x20000
-- 
2.30.2



More information about the U-Boot mailing list