[PATCH v7 08/10] board: schneider: add RZN1 board support
Ralph Siemsen
ralph.siemsen at linaro.org
Sat May 13 03:36:56 CEST 2023
Add support for Schneider Electric RZ/N1D and RZ/N1S boards, which
are based on the Reneasas RZ/N1 SoC devices.
The intention is to support both boards using a single defconfig, and to
handle the differences at runtime.
Signed-off-by: Ralph Siemsen <ralph.siemsen at linaro.org>
---
(no changes since v6)
Changes in v6:
- move board-specific DDR init to drivers/ram/renesas/rzn1
- drop call to fdtdec_setup_mem_size_base()
- minor code cleanups
- use wait_for_bit macros instead of endless while loop
- in commit message fix Schneider Electronics -> Electric
Changes in v5:
- put all local DTS changes in r9a06g032-rzn1-snarc.dts
- move board-specific DDR init out of drivers/ram/cadence.
- tables of DDR paramters are now stored in devicetree
- support two different DDR memory types
- use BIT() macro
- obtain RZN1_DDR_BASE from DT
- uncomment error return when syscon fails
- make some functions static
Changes in v4:
- add binman support via r9a06g032-rzn1-snarc-u-boot.dtsi
Changes in v3:
- rename board LCES to rzn1-snarc
- move CONFIG_SYS_NS16550_MEM32 to Kconfig
- define CFG_SYS_INIT_RAM_{ADDR,SIZE}
- removed debug uart settings from defconfig
arch/arm/dts/r9a06g032-ddr.dtsi | 512 ++++++++++++++++++
arch/arm/dts/r9a06g032-rzn1-snarc-u-boot.dtsi | 23 +
arch/arm/dts/r9a06g032-rzn1-snarc.dts | 92 ++++
board/schneider/rzn1-snarc/Kconfig | 18 +
board/schneider/rzn1-snarc/Makefile | 3 +
board/schneider/rzn1-snarc/rzn1.c | 31 ++
configs/rzn1_snarc_defconfig | 24 +
drivers/ram/Makefile | 1 +
drivers/ram/renesas/Makefile | 3 +
drivers/ram/renesas/rzn1/Makefile | 3 +
drivers/ram/renesas/rzn1/ddr_async.c | 376 +++++++++++++
include/configs/rzn1-snarc.h | 13 +
include/renesas/is43tr16256a_125k_CTL.h | 419 ++++++++++++++
.../renesas/jedec_ddr3_2g_x16_1333h_500_cl8.h | 399 ++++++++++++++
14 files changed, 1917 insertions(+)
create mode 100644 arch/arm/dts/r9a06g032-ddr.dtsi
create mode 100644 arch/arm/dts/r9a06g032-rzn1-snarc-u-boot.dtsi
create mode 100644 arch/arm/dts/r9a06g032-rzn1-snarc.dts
create mode 100644 board/schneider/rzn1-snarc/Kconfig
create mode 100644 board/schneider/rzn1-snarc/Makefile
create mode 100644 board/schneider/rzn1-snarc/rzn1.c
create mode 100644 configs/rzn1_snarc_defconfig
create mode 100644 drivers/ram/renesas/Makefile
create mode 100644 drivers/ram/renesas/rzn1/Makefile
create mode 100644 drivers/ram/renesas/rzn1/ddr_async.c
create mode 100644 include/configs/rzn1-snarc.h
create mode 100644 include/renesas/is43tr16256a_125k_CTL.h
create mode 100644 include/renesas/jedec_ddr3_2g_x16_1333h_500_cl8.h
diff --git a/arch/arm/dts/r9a06g032-ddr.dtsi b/arch/arm/dts/r9a06g032-ddr.dtsi
new file mode 100644
index 0000000000..8c7d0873fe
--- /dev/null
+++ b/arch/arm/dts/r9a06g032-ddr.dtsi
@@ -0,0 +1,512 @@
+// SPDX-License-Identifier: GPL-2.0
+
+ cadence,ctl-000 = <
+ DENALI_CTL_00_DATA
+ DENALI_CTL_01_DATA
+ DENALI_CTL_02_DATA
+ DENALI_CTL_03_DATA
+ DENALI_CTL_04_DATA
+ DENALI_CTL_05_DATA
+ DENALI_CTL_06_DATA
+ DENALI_CTL_07_DATA
+ DENALI_CTL_08_DATA
+ DENALI_CTL_09_DATA
+
+ DENALI_CTL_10_DATA
+ DENALI_CTL_11_DATA
+ DENALI_CTL_12_DATA
+ DENALI_CTL_13_DATA
+ DENALI_CTL_14_DATA
+ DENALI_CTL_15_DATA
+ DENALI_CTL_16_DATA
+ DENALI_CTL_17_DATA
+ DENALI_CTL_18_DATA
+ DENALI_CTL_19_DATA
+
+ DENALI_CTL_20_DATA
+ DENALI_CTL_21_DATA
+ DENALI_CTL_22_DATA
+ DENALI_CTL_23_DATA
+ DENALI_CTL_24_DATA
+ DENALI_CTL_25_DATA
+ DENALI_CTL_26_DATA
+ DENALI_CTL_27_DATA
+ DENALI_CTL_28_DATA
+ DENALI_CTL_29_DATA
+
+ DENALI_CTL_30_DATA
+ DENALI_CTL_31_DATA
+ DENALI_CTL_32_DATA
+ DENALI_CTL_33_DATA
+ DENALI_CTL_34_DATA
+ DENALI_CTL_35_DATA
+ DENALI_CTL_36_DATA
+ DENALI_CTL_37_DATA
+ DENALI_CTL_38_DATA
+ DENALI_CTL_39_DATA
+
+ DENALI_CTL_40_DATA
+ DENALI_CTL_41_DATA
+ DENALI_CTL_42_DATA
+ DENALI_CTL_43_DATA
+ DENALI_CTL_44_DATA
+ DENALI_CTL_45_DATA
+ DENALI_CTL_46_DATA
+ DENALI_CTL_47_DATA
+ DENALI_CTL_48_DATA
+ DENALI_CTL_49_DATA
+
+ DENALI_CTL_50_DATA
+ DENALI_CTL_51_DATA
+ DENALI_CTL_52_DATA
+ DENALI_CTL_53_DATA
+ DENALI_CTL_54_DATA
+ DENALI_CTL_55_DATA
+ DENALI_CTL_56_DATA
+ DENALI_CTL_57_DATA
+ DENALI_CTL_58_DATA
+ DENALI_CTL_59_DATA
+
+ DENALI_CTL_60_DATA
+ DENALI_CTL_61_DATA
+ DENALI_CTL_62_DATA
+ DENALI_CTL_63_DATA
+ DENALI_CTL_64_DATA
+ DENALI_CTL_65_DATA
+ DENALI_CTL_66_DATA
+ DENALI_CTL_67_DATA
+ DENALI_CTL_68_DATA
+ DENALI_CTL_69_DATA
+
+ DENALI_CTL_70_DATA
+ DENALI_CTL_71_DATA
+ DENALI_CTL_72_DATA
+ DENALI_CTL_73_DATA
+ DENALI_CTL_74_DATA
+ DENALI_CTL_75_DATA
+ DENALI_CTL_76_DATA
+ DENALI_CTL_77_DATA
+ DENALI_CTL_78_DATA
+ DENALI_CTL_79_DATA
+
+ DENALI_CTL_80_DATA
+ DENALI_CTL_81_DATA
+ DENALI_CTL_82_DATA
+ DENALI_CTL_83_DATA
+ DENALI_CTL_84_DATA
+ DENALI_CTL_85_DATA
+ DENALI_CTL_86_DATA
+ DENALI_CTL_87_DATA
+ DENALI_CTL_88_DATA
+ DENALI_CTL_89_DATA
+
+ DENALI_CTL_90_DATA
+ DENALI_CTL_91_DATA
+ DENALI_CTL_92_DATA
+ >;
+
+ cadence,ctl-350 = <
+ DENALI_CTL_350_DATA
+ DENALI_CTL_351_DATA
+ DENALI_CTL_352_DATA
+ DENALI_CTL_353_DATA
+ DENALI_CTL_354_DATA
+ DENALI_CTL_355_DATA
+ DENALI_CTL_356_DATA
+ DENALI_CTL_357_DATA
+ DENALI_CTL_358_DATA
+ DENALI_CTL_359_DATA
+
+ DENALI_CTL_360_DATA
+ DENALI_CTL_361_DATA
+ DENALI_CTL_362_DATA
+ DENALI_CTL_363_DATA
+ DENALI_CTL_364_DATA
+ DENALI_CTL_365_DATA
+ DENALI_CTL_366_DATA
+ DENALI_CTL_367_DATA
+ DENALI_CTL_368_DATA
+ DENALI_CTL_369_DATA
+
+ DENALI_CTL_370_DATA
+ DENALI_CTL_371_DATA
+ DENALI_CTL_372_DATA
+ DENALI_CTL_373_DATA
+ DENALI_CTL_374_DATA
+ >;
+
+#undef DENALI_CTL_00_DATA
+#undef DENALI_CTL_01_DATA
+#undef DENALI_CTL_02_DATA
+#undef DENALI_CTL_03_DATA
+#undef DENALI_CTL_04_DATA
+#undef DENALI_CTL_05_DATA
+#undef DENALI_CTL_06_DATA
+#undef DENALI_CTL_07_DATA
+#undef DENALI_CTL_08_DATA
+#undef DENALI_CTL_09_DATA
+#undef DENALI_CTL_10_DATA
+#undef DENALI_CTL_11_DATA
+#undef DENALI_CTL_12_DATA
+#undef DENALI_CTL_13_DATA
+#undef DENALI_CTL_14_DATA
+#undef DENALI_CTL_15_DATA
+#undef DENALI_CTL_16_DATA
+#undef DENALI_CTL_17_DATA
+#undef DENALI_CTL_18_DATA
+#undef DENALI_CTL_19_DATA
+#undef DENALI_CTL_20_DATA
+#undef DENALI_CTL_21_DATA
+#undef DENALI_CTL_22_DATA
+#undef DENALI_CTL_23_DATA
+#undef DENALI_CTL_24_DATA
+#undef DENALI_CTL_25_DATA
+#undef DENALI_CTL_26_DATA
+#undef DENALI_CTL_27_DATA
+#undef DENALI_CTL_28_DATA
+#undef DENALI_CTL_29_DATA
+#undef DENALI_CTL_30_DATA
+#undef DENALI_CTL_31_DATA
+#undef DENALI_CTL_32_DATA
+#undef DENALI_CTL_33_DATA
+#undef DENALI_CTL_34_DATA
+#undef DENALI_CTL_35_DATA
+#undef DENALI_CTL_36_DATA
+#undef DENALI_CTL_37_DATA
+#undef DENALI_CTL_38_DATA
+#undef DENALI_CTL_39_DATA
+#undef DENALI_CTL_40_DATA
+#undef DENALI_CTL_41_DATA
+#undef DENALI_CTL_42_DATA
+#undef DENALI_CTL_43_DATA
+#undef DENALI_CTL_44_DATA
+#undef DENALI_CTL_45_DATA
+#undef DENALI_CTL_46_DATA
+#undef DENALI_CTL_47_DATA
+#undef DENALI_CTL_48_DATA
+#undef DENALI_CTL_49_DATA
+#undef DENALI_CTL_50_DATA
+#undef DENALI_CTL_51_DATA
+#undef DENALI_CTL_52_DATA
+#undef DENALI_CTL_53_DATA
+#undef DENALI_CTL_54_DATA
+#undef DENALI_CTL_55_DATA
+#undef DENALI_CTL_56_DATA
+#undef DENALI_CTL_57_DATA
+#undef DENALI_CTL_58_DATA
+#undef DENALI_CTL_59_DATA
+#undef DENALI_CTL_60_DATA
+#undef DENALI_CTL_61_DATA
+#undef DENALI_CTL_62_DATA
+#undef DENALI_CTL_63_DATA
+#undef DENALI_CTL_64_DATA
+#undef DENALI_CTL_65_DATA
+#undef DENALI_CTL_66_DATA
+#undef DENALI_CTL_67_DATA
+#undef DENALI_CTL_68_DATA
+#undef DENALI_CTL_69_DATA
+#undef DENALI_CTL_70_DATA
+#undef DENALI_CTL_71_DATA
+#undef DENALI_CTL_72_DATA
+#undef DENALI_CTL_73_DATA
+#undef DENALI_CTL_74_DATA
+#undef DENALI_CTL_75_DATA
+#undef DENALI_CTL_76_DATA
+#undef DENALI_CTL_77_DATA
+#undef DENALI_CTL_78_DATA
+#undef DENALI_CTL_79_DATA
+#undef DENALI_CTL_80_DATA
+#undef DENALI_CTL_81_DATA
+#undef DENALI_CTL_82_DATA
+#undef DENALI_CTL_83_DATA
+#undef DENALI_CTL_84_DATA
+#undef DENALI_CTL_85_DATA
+#undef DENALI_CTL_86_DATA
+#undef DENALI_CTL_87_DATA
+#undef DENALI_CTL_88_DATA
+#undef DENALI_CTL_89_DATA
+#undef DENALI_CTL_90_DATA
+#undef DENALI_CTL_91_DATA
+#undef DENALI_CTL_92_DATA
+#undef DENALI_CTL_93_DATA
+#undef DENALI_CTL_94_DATA
+#undef DENALI_CTL_95_DATA
+#undef DENALI_CTL_96_DATA
+#undef DENALI_CTL_97_DATA
+#undef DENALI_CTL_98_DATA
+#undef DENALI_CTL_99_DATA
+#undef DENALI_CTL_100_DATA
+#undef DENALI_CTL_101_DATA
+#undef DENALI_CTL_102_DATA
+#undef DENALI_CTL_103_DATA
+#undef DENALI_CTL_104_DATA
+#undef DENALI_CTL_105_DATA
+#undef DENALI_CTL_106_DATA
+#undef DENALI_CTL_107_DATA
+#undef DENALI_CTL_108_DATA
+#undef DENALI_CTL_109_DATA
+#undef DENALI_CTL_110_DATA
+#undef DENALI_CTL_111_DATA
+#undef DENALI_CTL_112_DATA
+#undef DENALI_CTL_113_DATA
+#undef DENALI_CTL_114_DATA
+#undef DENALI_CTL_115_DATA
+#undef DENALI_CTL_116_DATA
+#undef DENALI_CTL_117_DATA
+#undef DENALI_CTL_118_DATA
+#undef DENALI_CTL_119_DATA
+#undef DENALI_CTL_120_DATA
+#undef DENALI_CTL_121_DATA
+#undef DENALI_CTL_122_DATA
+#undef DENALI_CTL_123_DATA
+#undef DENALI_CTL_124_DATA
+#undef DENALI_CTL_125_DATA
+#undef DENALI_CTL_126_DATA
+#undef DENALI_CTL_127_DATA
+#undef DENALI_CTL_128_DATA
+#undef DENALI_CTL_129_DATA
+#undef DENALI_CTL_130_DATA
+#undef DENALI_CTL_131_DATA
+#undef DENALI_CTL_132_DATA
+#undef DENALI_CTL_133_DATA
+#undef DENALI_CTL_134_DATA
+#undef DENALI_CTL_135_DATA
+#undef DENALI_CTL_136_DATA
+#undef DENALI_CTL_137_DATA
+#undef DENALI_CTL_138_DATA
+#undef DENALI_CTL_139_DATA
+#undef DENALI_CTL_140_DATA
+#undef DENALI_CTL_141_DATA
+#undef DENALI_CTL_142_DATA
+#undef DENALI_CTL_143_DATA
+#undef DENALI_CTL_144_DATA
+#undef DENALI_CTL_145_DATA
+#undef DENALI_CTL_146_DATA
+#undef DENALI_CTL_147_DATA
+#undef DENALI_CTL_148_DATA
+#undef DENALI_CTL_149_DATA
+#undef DENALI_CTL_150_DATA
+#undef DENALI_CTL_151_DATA
+#undef DENALI_CTL_152_DATA
+#undef DENALI_CTL_153_DATA
+#undef DENALI_CTL_154_DATA
+#undef DENALI_CTL_155_DATA
+#undef DENALI_CTL_156_DATA
+#undef DENALI_CTL_157_DATA
+#undef DENALI_CTL_158_DATA
+#undef DENALI_CTL_159_DATA
+#undef DENALI_CTL_160_DATA
+#undef DENALI_CTL_161_DATA
+#undef DENALI_CTL_162_DATA
+#undef DENALI_CTL_163_DATA
+#undef DENALI_CTL_164_DATA
+#undef DENALI_CTL_165_DATA
+#undef DENALI_CTL_166_DATA
+#undef DENALI_CTL_167_DATA
+#undef DENALI_CTL_168_DATA
+#undef DENALI_CTL_169_DATA
+#undef DENALI_CTL_170_DATA
+#undef DENALI_CTL_171_DATA
+#undef DENALI_CTL_172_DATA
+#undef DENALI_CTL_173_DATA
+#undef DENALI_CTL_174_DATA
+#undef DENALI_CTL_175_DATA
+#undef DENALI_CTL_176_DATA
+#undef DENALI_CTL_177_DATA
+#undef DENALI_CTL_178_DATA
+#undef DENALI_CTL_179_DATA
+#undef DENALI_CTL_180_DATA
+#undef DENALI_CTL_181_DATA
+#undef DENALI_CTL_182_DATA
+#undef DENALI_CTL_183_DATA
+#undef DENALI_CTL_184_DATA
+#undef DENALI_CTL_185_DATA
+#undef DENALI_CTL_186_DATA
+#undef DENALI_CTL_187_DATA
+#undef DENALI_CTL_188_DATA
+#undef DENALI_CTL_189_DATA
+#undef DENALI_CTL_190_DATA
+#undef DENALI_CTL_191_DATA
+#undef DENALI_CTL_192_DATA
+#undef DENALI_CTL_193_DATA
+#undef DENALI_CTL_194_DATA
+#undef DENALI_CTL_195_DATA
+#undef DENALI_CTL_196_DATA
+#undef DENALI_CTL_197_DATA
+#undef DENALI_CTL_198_DATA
+#undef DENALI_CTL_199_DATA
+#undef DENALI_CTL_200_DATA
+#undef DENALI_CTL_201_DATA
+#undef DENALI_CTL_202_DATA
+#undef DENALI_CTL_203_DATA
+#undef DENALI_CTL_204_DATA
+#undef DENALI_CTL_205_DATA
+#undef DENALI_CTL_206_DATA
+#undef DENALI_CTL_207_DATA
+#undef DENALI_CTL_208_DATA
+#undef DENALI_CTL_209_DATA
+#undef DENALI_CTL_210_DATA
+#undef DENALI_CTL_211_DATA
+#undef DENALI_CTL_212_DATA
+#undef DENALI_CTL_213_DATA
+#undef DENALI_CTL_214_DATA
+#undef DENALI_CTL_215_DATA
+#undef DENALI_CTL_216_DATA
+#undef DENALI_CTL_217_DATA
+#undef DENALI_CTL_218_DATA
+#undef DENALI_CTL_219_DATA
+#undef DENALI_CTL_220_DATA
+#undef DENALI_CTL_221_DATA
+#undef DENALI_CTL_222_DATA
+#undef DENALI_CTL_223_DATA
+#undef DENALI_CTL_224_DATA
+#undef DENALI_CTL_225_DATA
+#undef DENALI_CTL_226_DATA
+#undef DENALI_CTL_227_DATA
+#undef DENALI_CTL_228_DATA
+#undef DENALI_CTL_229_DATA
+#undef DENALI_CTL_230_DATA
+#undef DENALI_CTL_231_DATA
+#undef DENALI_CTL_232_DATA
+#undef DENALI_CTL_233_DATA
+#undef DENALI_CTL_234_DATA
+#undef DENALI_CTL_235_DATA
+#undef DENALI_CTL_236_DATA
+#undef DENALI_CTL_237_DATA
+#undef DENALI_CTL_238_DATA
+#undef DENALI_CTL_239_DATA
+#undef DENALI_CTL_240_DATA
+#undef DENALI_CTL_241_DATA
+#undef DENALI_CTL_242_DATA
+#undef DENALI_CTL_243_DATA
+#undef DENALI_CTL_244_DATA
+#undef DENALI_CTL_245_DATA
+#undef DENALI_CTL_246_DATA
+#undef DENALI_CTL_247_DATA
+#undef DENALI_CTL_248_DATA
+#undef DENALI_CTL_249_DATA
+#undef DENALI_CTL_250_DATA
+#undef DENALI_CTL_251_DATA
+#undef DENALI_CTL_252_DATA
+#undef DENALI_CTL_253_DATA
+#undef DENALI_CTL_254_DATA
+#undef DENALI_CTL_255_DATA
+#undef DENALI_CTL_256_DATA
+#undef DENALI_CTL_257_DATA
+#undef DENALI_CTL_258_DATA
+#undef DENALI_CTL_259_DATA
+#undef DENALI_CTL_260_DATA
+#undef DENALI_CTL_261_DATA
+#undef DENALI_CTL_262_DATA
+#undef DENALI_CTL_263_DATA
+#undef DENALI_CTL_264_DATA
+#undef DENALI_CTL_265_DATA
+#undef DENALI_CTL_266_DATA
+#undef DENALI_CTL_267_DATA
+#undef DENALI_CTL_268_DATA
+#undef DENALI_CTL_269_DATA
+#undef DENALI_CTL_270_DATA
+#undef DENALI_CTL_271_DATA
+#undef DENALI_CTL_272_DATA
+#undef DENALI_CTL_273_DATA
+#undef DENALI_CTL_274_DATA
+#undef DENALI_CTL_275_DATA
+#undef DENALI_CTL_276_DATA
+#undef DENALI_CTL_277_DATA
+#undef DENALI_CTL_278_DATA
+#undef DENALI_CTL_279_DATA
+#undef DENALI_CTL_280_DATA
+#undef DENALI_CTL_281_DATA
+#undef DENALI_CTL_282_DATA
+#undef DENALI_CTL_283_DATA
+#undef DENALI_CTL_284_DATA
+#undef DENALI_CTL_285_DATA
+#undef DENALI_CTL_286_DATA
+#undef DENALI_CTL_287_DATA
+#undef DENALI_CTL_288_DATA
+#undef DENALI_CTL_289_DATA
+#undef DENALI_CTL_290_DATA
+#undef DENALI_CTL_291_DATA
+#undef DENALI_CTL_292_DATA
+#undef DENALI_CTL_293_DATA
+#undef DENALI_CTL_294_DATA
+#undef DENALI_CTL_295_DATA
+#undef DENALI_CTL_296_DATA
+#undef DENALI_CTL_297_DATA
+#undef DENALI_CTL_298_DATA
+#undef DENALI_CTL_299_DATA
+#undef DENALI_CTL_300_DATA
+#undef DENALI_CTL_301_DATA
+#undef DENALI_CTL_302_DATA
+#undef DENALI_CTL_303_DATA
+#undef DENALI_CTL_304_DATA
+#undef DENALI_CTL_305_DATA
+#undef DENALI_CTL_306_DATA
+#undef DENALI_CTL_307_DATA
+#undef DENALI_CTL_308_DATA
+#undef DENALI_CTL_309_DATA
+#undef DENALI_CTL_310_DATA
+#undef DENALI_CTL_311_DATA
+#undef DENALI_CTL_312_DATA
+#undef DENALI_CTL_313_DATA
+#undef DENALI_CTL_314_DATA
+#undef DENALI_CTL_315_DATA
+#undef DENALI_CTL_316_DATA
+#undef DENALI_CTL_317_DATA
+#undef DENALI_CTL_318_DATA
+#undef DENALI_CTL_319_DATA
+#undef DENALI_CTL_320_DATA
+#undef DENALI_CTL_321_DATA
+#undef DENALI_CTL_322_DATA
+#undef DENALI_CTL_323_DATA
+#undef DENALI_CTL_324_DATA
+#undef DENALI_CTL_325_DATA
+#undef DENALI_CTL_326_DATA
+#undef DENALI_CTL_327_DATA
+#undef DENALI_CTL_328_DATA
+#undef DENALI_CTL_329_DATA
+#undef DENALI_CTL_330_DATA
+#undef DENALI_CTL_331_DATA
+#undef DENALI_CTL_332_DATA
+#undef DENALI_CTL_333_DATA
+#undef DENALI_CTL_334_DATA
+#undef DENALI_CTL_335_DATA
+#undef DENALI_CTL_336_DATA
+#undef DENALI_CTL_337_DATA
+#undef DENALI_CTL_338_DATA
+#undef DENALI_CTL_339_DATA
+#undef DENALI_CTL_340_DATA
+#undef DENALI_CTL_341_DATA
+#undef DENALI_CTL_342_DATA
+#undef DENALI_CTL_343_DATA
+#undef DENALI_CTL_344_DATA
+#undef DENALI_CTL_345_DATA
+#undef DENALI_CTL_346_DATA
+#undef DENALI_CTL_347_DATA
+#undef DENALI_CTL_348_DATA
+#undef DENALI_CTL_349_DATA
+#undef DENALI_CTL_350_DATA
+#undef DENALI_CTL_351_DATA
+#undef DENALI_CTL_352_DATA
+#undef DENALI_CTL_353_DATA
+#undef DENALI_CTL_354_DATA
+#undef DENALI_CTL_355_DATA
+#undef DENALI_CTL_356_DATA
+#undef DENALI_CTL_357_DATA
+#undef DENALI_CTL_358_DATA
+#undef DENALI_CTL_359_DATA
+#undef DENALI_CTL_360_DATA
+#undef DENALI_CTL_361_DATA
+#undef DENALI_CTL_362_DATA
+#undef DENALI_CTL_363_DATA
+#undef DENALI_CTL_364_DATA
+#undef DENALI_CTL_365_DATA
+#undef DENALI_CTL_366_DATA
+#undef DENALI_CTL_367_DATA
+#undef DENALI_CTL_368_DATA
+#undef DENALI_CTL_369_DATA
+#undef DENALI_CTL_370_DATA
+#undef DENALI_CTL_371_DATA
+#undef DENALI_CTL_372_DATA
+#undef DENALI_CTL_373_DATA
+#undef DENALI_CTL_374_DATA
diff --git a/arch/arm/dts/r9a06g032-rzn1-snarc-u-boot.dtsi b/arch/arm/dts/r9a06g032-rzn1-snarc-u-boot.dtsi
new file mode 100644
index 0000000000..794e711103
--- /dev/null
+++ b/arch/arm/dts/r9a06g032-rzn1-snarc-u-boot.dtsi
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Configuration file for binman
+ *
+ * After building u-boot, can generate the SPKG output by running:
+ * tools/binman/binman build -d arch/arm/dts/r9a06g032-rzn1-snarc.dtb -O <outdir>
+ */
+
+#include <config.h>
+
+/ {
+ binman: binman {
+ };
+};
+
+&binman {
+ mkimage {
+ filename = "u-boot.bin.spkg";
+ args = "-n board/schneider/rzn1-snarc/spkgimage.cfg -T spkgimage -a 0x20040000 -e 0x20040000";
+ u-boot {
+ };
+ };
+};
diff --git a/arch/arm/dts/r9a06g032-rzn1-snarc.dts b/arch/arm/dts/r9a06g032-rzn1-snarc.dts
new file mode 100644
index 0000000000..7de8ee15ef
--- /dev/null
+++ b/arch/arm/dts/r9a06g032-rzn1-snarc.dts
@@ -0,0 +1,92 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for Schneider RZ/N1 Board
+ *
+ * Based on r9a06g032-rzn1d400-db.dts
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/pinctrl/rzn1-pinctrl.h>
+#include "r9a06g032.dtsi"
+
+/ {
+ model = "Schneider RZ/N1 Board";
+ compatible = "schneider,rzn1", "renesas,r9a06g032";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x10000000>;
+ };
+
+ soc {
+ plat_regs: syscon at 4000c000 {
+ compatible = "syscon";
+ reg = <0x4000c000 0x1000>;
+ };
+
+ system-controller at 4000c000 {
+ regmap = <&plat_regs>;
+ };
+
+ ddrctrl: memory-controller at 4000d000 {
+ compatible = "cadence,ddr-ctrl";
+ reg = <0x4000d000 0x1000>, <0x4000e000 0x100>;
+ reg-names = "ddrc", "phy";
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&sysctrl R9A06G032_CLK_DDRC>, <&sysctrl R9A06G032_HCLK_DDRC>;
+ clock-names = "clk_ddrc", "hclk_ddrc";
+ syscon = <&plat_regs>;
+ status = "disabled";
+ };
+ };
+
+ reboot {
+ compatible = "syscon-reboot";
+ regmap = <&plat_regs>;
+ offset = <0x198>; /* sysctrl.RSTEN */
+ mask = <0x40>; /* bit 6 = SWRST_REQ */
+ value = <0x40>;
+ };
+};
+
+&ddrctrl {
+ status = "okay";
+
+ conf-1 {
+ size = <0x40000000>; /* 1 GB */
+ #include "renesas/is43tr16256a_125k_CTL.h"
+ #include "r9a06g032-ddr.dtsi"
+ };
+ conf-2 {
+ size = <0x10000000>; /* 256 MB */
+ #include "renesas/jedec_ddr3_2g_x16_1333h_500_cl8.h"
+ #include "r9a06g032-ddr.dtsi"
+ };
+};
+
+&pinctrl {
+ status = "okay";
+
+ pins_uart0: pins_uart0 {
+ pinmux = <
+ RZN1_PINMUX(103, RZN1_FUNC_UART0_I) /* UART0_TXD */
+ RZN1_PINMUX(104, RZN1_FUNC_UART0_I) /* UART0_RXD */
+ >;
+ bias-disable;
+ };
+};
+
+&uart0 {
+ pinctrl-0 = <&pins_uart0>;
+ pinctrl-names = "default";
+ status = "okay";
+};
diff --git a/board/schneider/rzn1-snarc/Kconfig b/board/schneider/rzn1-snarc/Kconfig
new file mode 100644
index 0000000000..1c1c235f00
--- /dev/null
+++ b/board/schneider/rzn1-snarc/Kconfig
@@ -0,0 +1,18 @@
+if TARGET_SCHNEIDER_RZN1
+
+config TEXT_BASE
+ default 0x20040000
+
+config SYS_MONITOR_LEN
+ default 524288
+
+config SYS_BOARD
+ default "rzn1-snarc"
+
+config SYS_VENDOR
+ default "schneider"
+
+config SYS_CONFIG_NAME
+ default "rzn1-snarc"
+
+endif
diff --git a/board/schneider/rzn1-snarc/Makefile b/board/schneider/rzn1-snarc/Makefile
new file mode 100644
index 0000000000..e197ca8cb4
--- /dev/null
+++ b/board/schneider/rzn1-snarc/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0+
+
+obj-y := rzn1.o
diff --git a/board/schneider/rzn1-snarc/rzn1.c b/board/schneider/rzn1-snarc/rzn1.c
new file mode 100644
index 0000000000..09241c3a95
--- /dev/null
+++ b/board/schneider/rzn1-snarc/rzn1.c
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+#include <common.h>
+#include <dm.h>
+#include <ram.h>
+#include <asm/global_data.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int board_init(void)
+{
+ gd->bd->bi_boot_params = gd->ram_base + 0x100;
+
+ return 0;
+}
+
+int dram_init(void)
+{
+ struct udevice *dev;
+ int err;
+
+ /*
+ * This will end up calling cadence_ddr_probe(),
+ * and will also update gd->ram_size.
+ */
+ err = uclass_get_device(UCLASS_RAM, 0, &dev);
+ if (err)
+ debug("DRAM init failed: %d\n", err);
+
+ return err;
+}
diff --git a/configs/rzn1_snarc_defconfig b/configs/rzn1_snarc_defconfig
new file mode 100644
index 0000000000..eb52aa3c8a
--- /dev/null
+++ b/configs/rzn1_snarc_defconfig
@@ -0,0 +1,24 @@
+CONFIG_ARM=y
+CONFIG_SYS_ARCH_TIMER=y
+CONFIG_SYS_THUMB_BUILD=y
+CONFIG_ARCH_RMOBILE=y
+CONFIG_SYS_MALLOC_LEN=0xb0000
+CONFIG_SYS_MALLOC_F_LEN=0x800
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_DEFAULT_DEVICE_TREE="r9a06g032-rzn1-snarc"
+CONFIG_RZN1=y
+CONFIG_SYS_LOAD_ADDR=0x80008000
+CONFIG_SYS_MEMTEST_START=0x80000000
+CONFIG_SYS_MEMTEST_END=0x8fffffff
+# CONFIG_ARCH_MISC_INIT is not set
+# CONFIG_BOARD_EARLY_INIT_F is not set
+CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
+# CONFIG_SYS_ALT_MEMTEST_BITFLIP is not set
+CONFIG_CMD_CLK=y
+CONFIG_OF_CONTROL=y
+CONFIG_RAM=y
+CONFIG_CADENCE_DDR_CTRL=y
+CONFIG_SYS_NS16550=y
+CONFIG_SYS_NS16550_MEM32=y
+# CONFIG_EFI_LOADER is not set
diff --git a/drivers/ram/Makefile b/drivers/ram/Makefile
index b281129f89..6eb1a24135 100644
--- a/drivers/ram/Makefile
+++ b/drivers/ram/Makefile
@@ -25,4 +25,5 @@ obj-$(CONFIG_SPL_STARFIVE_DDR) += starfive/
endif
obj-$(CONFIG_ARCH_OCTEON) += octeon/
+obj-$(CONFIG_ARCH_RMOBILE) += renesas/
obj-$(CONFIG_CADENCE_DDR_CTRL) += cadence/
diff --git a/drivers/ram/renesas/Makefile b/drivers/ram/renesas/Makefile
new file mode 100644
index 0000000000..705cc4b6fa
--- /dev/null
+++ b/drivers/ram/renesas/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0+
+
+obj-$(CONFIG_RZN1) += rzn1/
diff --git a/drivers/ram/renesas/rzn1/Makefile b/drivers/ram/renesas/rzn1/Makefile
new file mode 100644
index 0000000000..357c2a506e
--- /dev/null
+++ b/drivers/ram/renesas/rzn1/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0+
+
+obj-y += ddr_async.o
diff --git a/drivers/ram/renesas/rzn1/ddr_async.c b/drivers/ram/renesas/rzn1/ddr_async.c
new file mode 100644
index 0000000000..7a81497bc9
--- /dev/null
+++ b/drivers/ram/renesas/rzn1/ddr_async.c
@@ -0,0 +1,376 @@
+// SPDX-License-Identifier: BSD-2-Clause
+/*
+ * RZ/N1 DDR Controller initialisation
+ *
+ * The DDR Controller register values for a specific DDR device, mode and
+ * frequency are generated using a Cadence tool.
+ *
+ * Copyright (C) 2015 Renesas Electronics Europe Ltd
+ */
+#include <common.h>
+#include <clk.h>
+#include <dm.h>
+#include <dm/device_compat.h>
+#include <ram.h>
+#include <regmap.h>
+#include <syscon.h>
+#include <asm/io.h>
+#include <linux/delay.h>
+#include <wait_bit.h>
+#include <renesas/ddr_ctrl.h>
+
+void clk_rzn1_reset_state(struct clk *clk, int on);
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct cadence_ddr_info {
+ struct udevice *dev;
+ void __iomem *ddrc;
+ void __iomem *phy;
+ struct clk clk_ddrc;
+ struct clk hclk_ddrc;
+ struct regmap *syscon;
+ bool enable_ecc;
+ bool enable_8bit;
+ u32 ddr_size;
+
+ /* These two used only during .probe */
+ u32 *reg0;
+ u32 *reg350;
+};
+
+static inline u32 cadence_readl(void __iomem *addr, unsigned int offset)
+{
+ return readl(addr + offset);
+}
+
+static inline void cadence_writel(void __iomem *addr, unsigned int offset,
+ u32 data)
+{
+ debug("%s: addr = 0x%p, value = 0x%08x\n", __func__, addr + offset, data);
+ writel(data, addr + offset);
+}
+
+#define ddrc_readl(off) cadence_readl(priv->ddrc, off)
+#define ddrc_writel(val, off) cadence_writel(priv->ddrc, off, val)
+
+#define phy_readl(off) cadence_readl(priv->phy, off)
+#define phy_writel(val, off) cadence_writel(priv->phy, off, val)
+
+#define RZN1_DDR3_SINGLE_BANK 3
+#define RZN1_DDR3_DUAL_BANK 32
+
+#define FUNCCTRL 0x00
+#define FUNCCTRL_MASKSDLOFS (0x18 << 16)
+#define FUNCCTRL_DVDDQ_1_5V BIT(8)
+#define FUNCCTRL_RESET_N BIT(0)
+#define DLLCTRL 0x04
+#define DLLCTRL_ASDLLOCK BIT(26)
+#define DLLCTRL_MFSL_500MHz (2 << 1)
+#define DLLCTRL_MDLLSTBY BIT(0)
+#define ZQCALCTRL 0x08
+#define ZQCALCTRL_ZQCALEND BIT(30)
+#define ZQCALCTRL_ZQCALRSTB BIT(0)
+#define ZQODTCTRL 0x0c
+#define RDCTRL 0x10
+#define RDTMG 0x14
+#define FIFOINIT 0x18
+#define FIFOINIT_RDPTINITEXE BIT(8)
+#define FIFOINIT_WRPTINITEXE BIT(0)
+#define OUTCTRL 0x1c
+#define OUTCTRL_ADCMDOE BIT(0)
+#define WLCTRL1 0x40
+#define WLCTRL1_WLSTR BIT(24)
+#define DQCALOFS1 0xe8
+
+/* DDR PHY setup */
+static void ddr_phy_init(struct cadence_ddr_info *priv, int ddr_type)
+{
+ u32 val;
+
+ /* Disable DDR Controller clock and FlexWAY connection */
+ clk_disable(&priv->hclk_ddrc);
+ clk_disable(&priv->clk_ddrc);
+
+ clk_rzn1_reset_state(&priv->hclk_ddrc, 0);
+ clk_rzn1_reset_state(&priv->clk_ddrc, 0);
+
+ /* Enable DDR Controller clock and FlexWAY connection */
+ clk_enable(&priv->clk_ddrc);
+ clk_enable(&priv->hclk_ddrc);
+
+ /* DDR PHY Soft reset assert */
+ ddrc_writel(FUNCCTRL_MASKSDLOFS | FUNCCTRL_DVDDQ_1_5V, FUNCCTRL);
+
+ clk_rzn1_reset_state(&priv->hclk_ddrc, 1);
+ clk_rzn1_reset_state(&priv->clk_ddrc, 1);
+
+ /* DDR PHY setup */
+ phy_writel(DLLCTRL_MFSL_500MHz | DLLCTRL_MDLLSTBY, DLLCTRL);
+ phy_writel(0x00000182, ZQCALCTRL);
+ if (ddr_type == RZN1_DDR3_DUAL_BANK)
+ phy_writel(0xAB330031, ZQODTCTRL);
+ else if (ddr_type == RZN1_DDR3_SINGLE_BANK)
+ phy_writel(0xAB320051, ZQODTCTRL);
+ else /* DDR2 */
+ phy_writel(0xAB330071, ZQODTCTRL);
+ phy_writel(0xB545B544, RDCTRL);
+ phy_writel(0x000000B0, RDTMG);
+ phy_writel(0x020A0806, OUTCTRL);
+ if (ddr_type == RZN1_DDR3_DUAL_BANK)
+ phy_writel(0x80005556, WLCTRL1);
+ else
+ phy_writel(0x80005C5D, WLCTRL1);
+ phy_writel(0x00000101, FIFOINIT);
+ phy_writel(0x00004545, DQCALOFS1);
+
+ /* Step 9 MDLL reset release */
+ val = phy_readl(DLLCTRL);
+ val &= ~DLLCTRL_MDLLSTBY;
+ phy_writel(val, DLLCTRL);
+
+ /* Step 12 Soft reset release */
+ val = phy_readl(FUNCCTRL);
+ val |= FUNCCTRL_RESET_N;
+ phy_writel(val, FUNCCTRL);
+
+ /* Step 13 FIFO pointer initialize */
+ phy_writel(FIFOINIT_RDPTINITEXE | FIFOINIT_WRPTINITEXE, FIFOINIT);
+
+ /* Step 14 Execute ZQ Calibration */
+ val = phy_readl(ZQCALCTRL);
+ val |= ZQCALCTRL_ZQCALRSTB;
+ phy_writel(val, ZQCALCTRL);
+
+ /* Step 15 Wait for 200us or more, or wait for DFIINITCOMPLETE to be "1" */
+ wait_for_bit_le32(priv->phy + DLLCTRL, DLLCTRL_ASDLLOCK, true, 1, false);
+ wait_for_bit_le32(priv->phy + ZQCALCTRL, ZQCALCTRL_ZQCALEND, true, 1, false);
+
+ /* Step 16 Enable Address and Command output */
+ val = phy_readl(OUTCTRL);
+ val |= OUTCTRL_ADCMDOE;
+ phy_writel(val, OUTCTRL);
+
+ /* Step 17 Wait for 200us or more(from MRESETB=0) */
+ udelay(200);
+}
+
+static void ddr_phy_enable_wl(struct cadence_ddr_info *priv)
+{
+ u32 val;
+
+ /* Step 26 (Set Write Leveling) */
+ val = phy_readl(WLCTRL1);
+ val |= WLCTRL1_WLSTR;
+ phy_writel(val, WLCTRL1);
+}
+
+#define RZN1_V_DDR_BASE 0x80000000 /* RZ/N1D only */
+
+static void rzn1_ddr3_single_bank(void *ddr_ctrl_base)
+{
+ /* CS0 */
+ cdns_ddr_set_mr1(ddr_ctrl_base, 0,
+ MR1_ODT_IMPEDANCE_60_OHMS,
+ MR1_DRIVE_STRENGTH_40_OHMS);
+ cdns_ddr_set_mr2(ddr_ctrl_base, 0,
+ MR2_DYNAMIC_ODT_OFF,
+ MR2_SELF_REFRESH_TEMP_EXT);
+
+ /* ODT_WR_MAP_CS0 = 1, ODT_RD_MAP_CS0 = 0 */
+ cdns_ddr_set_odt_map(ddr_ctrl_base, 0, 0x0100);
+}
+
+static int rzn1_dram_init(struct cadence_ddr_info *priv)
+{
+ u32 version;
+ u32 ddr_start_addr = 0;
+
+ ddr_phy_init(priv, RZN1_DDR3_SINGLE_BANK);
+
+ /*
+ * Override DDR PHY Interface (DFI) related settings
+ * DFI is the internal interface between the DDR controller and the DDR PHY.
+ * These settings are specific to the board and can't be known by the settings
+ * provided for each DDR model within the generated include.
+ */
+ priv->reg350[351 - 350] = 0x001e0000;
+ priv->reg350[352 - 350] = 0x1e680000;
+ priv->reg350[353 - 350] = 0x02000020;
+ priv->reg350[354 - 350] = 0x02000200;
+ priv->reg350[355 - 350] = 0x00000c30;
+ priv->reg350[356 - 350] = 0x00009808;
+ priv->reg350[357 - 350] = 0x020a0706;
+ priv->reg350[372 - 350] = 0x01000000;
+
+ /*
+ * On ES1.0 devices, the DDR start address that the DDR Controller sees
+ * is the physical address of the DDR. However, later devices changed it
+ * to be 0 in order to fix an issue with DDR out-of-range detection.
+ */
+#define RZN1_SYSCTRL_REG_VERSION 412
+ regmap_read(priv->syscon, RZN1_SYSCTRL_REG_VERSION, &version);
+ if (version == 0x10)
+ ddr_start_addr = RZN1_V_DDR_BASE;
+
+ if (priv->enable_ecc)
+ priv->ddr_size = priv->ddr_size / 2;
+
+ /* DDR Controller is always in ASYNC mode */
+ cdns_ddr_ctrl_init(priv->ddrc, 1,
+ priv->reg0, priv->reg350,
+ ddr_start_addr, priv->ddr_size,
+ priv->enable_ecc, priv->enable_8bit);
+
+ rzn1_ddr3_single_bank(priv->ddrc);
+ cdns_ddr_set_diff_cs_delays(priv->ddrc, 2, 7, 2, 2);
+ cdns_ddr_set_same_cs_delays(priv->ddrc, 0, 7, 0, 0);
+ cdns_ddr_set_odt_times(priv->ddrc, 5, 6, 6, 0, 4);
+ cdns_ddr_ctrl_start(priv->ddrc);
+
+ ddr_phy_enable_wl(priv);
+
+ if (priv->enable_ecc) {
+ /*
+ * Any read before a write will trigger an ECC un-correctable error,
+ * causing a data abort. However, this is also true for any read with a
+ * size less than the AXI bus width. So, the only sensible solution is
+ * to write to all of DDR now and take the hit...
+ */
+ memset((void *)RZN1_V_DDR_BASE, 0xff, priv->ddr_size);
+ }
+
+ return 0;
+}
+
+static int cadence_ddr_get_info(struct udevice *udev, struct ram_info *info)
+{
+ info->base = 0;
+ info->size = gd->ram_size;
+
+ return 0;
+}
+
+static struct ram_ops cadence_ddr_ops = {
+ .get_info = cadence_ddr_get_info,
+};
+
+static int cadence_ddr_test(long *base, long maxsize)
+{
+ volatile long *addr = base;
+ long cnt;
+
+ maxsize /= sizeof(long);
+
+ for (cnt = 1; cnt <= maxsize; cnt <<= 1) {
+ addr[cnt - 1] = ~cnt;
+ }
+
+ for (cnt = 1; cnt <= maxsize; cnt <<= 1) {
+ if (addr[cnt - 1] != ~cnt) {
+ return 0;
+ }
+ }
+
+ return 1;
+}
+
+static int cadence_ddr_probe(struct udevice *dev)
+{
+ struct cadence_ddr_info *priv = dev_get_priv(dev);
+ ofnode subnode;
+ int ret;
+
+ priv->dev = dev;
+
+ priv->ddrc = dev_remap_addr_name(dev, "ddrc");
+ if (!priv->ddrc) {
+ dev_err(dev, "No reg property for Cadence DDR CTRL\n");
+ return -EINVAL;
+ }
+
+ priv->phy = dev_remap_addr_name(dev, "phy");
+ if (!priv->phy) {
+ dev_err(dev, "No reg property for Cadence DDR PHY\n");
+ return -EINVAL;
+ }
+
+ ret = clk_get_by_name(dev, "clk_ddrc", &priv->clk_ddrc);
+ if (ret) {
+ dev_err(dev, "No clock for Cadence DDR\n");
+ return ret;
+ }
+
+ ret = clk_get_by_name(dev, "hclk_ddrc", &priv->hclk_ddrc);
+ if (ret) {
+ dev_err(dev, "No HCLK for Cadence DDR\n");
+ return ret;
+ }
+
+ priv->syscon = syscon_regmap_lookup_by_phandle(dev, "syscon");
+ if (IS_ERR(priv->syscon)) {
+ dev_err(dev, "No syscon node found\n");
+ return PTR_ERR(priv->syscon);
+ }
+
+ priv->enable_ecc = dev_read_bool(dev, "enable-ecc");
+ priv->enable_8bit = dev_read_bool(dev, "enable-8bit");
+
+ priv->reg0 = malloc(88 * sizeof(u32));
+ priv->reg350 = malloc(25 * sizeof(u32));
+ if (!priv->reg0 || !priv->reg350)
+ panic("malloc failure\n");
+
+ /* There may be multiple DDR configurations to try */
+ dev_for_each_subnode(subnode, dev) {
+ ret = ofnode_read_u32(subnode, "size", &priv->ddr_size);
+ if (ret) {
+ dev_err(dev, "No size for Cadence DDR\n");
+ continue;
+ }
+
+ ret = ofnode_read_u32_array(subnode, "cadence,ctl-000", priv->reg0, 88);
+ if (ret) {
+ dev_err(dev, "No cadence,ctl-000\n");
+ continue;
+ }
+
+ ret = ofnode_read_u32_array(subnode, "cadence,ctl-350", priv->reg350, 25);
+ if (ret) {
+ dev_err(dev, "No cadence,ctl-350\n");
+ continue;
+ }
+
+ if (rzn1_dram_init(priv))
+ continue;
+
+ if (cadence_ddr_test((long *)RZN1_V_DDR_BASE, priv->ddr_size)) {
+ gd->ram_base = RZN1_V_DDR_BASE;
+ gd->ram_size = priv->ddr_size;
+ break;
+ }
+ }
+
+ if (!priv->ddr_size)
+ panic("No valid DDR to start");
+
+ free(priv->reg350);
+ free(priv->reg0);
+
+ return 0;
+}
+
+static const struct udevice_id cadence_ddr_ids[] = {
+ { .compatible = "cadence,ddr-ctrl" },
+ { }
+};
+
+U_BOOT_DRIVER(cadence_ddr) = {
+ .name = "cadence_ddr",
+ .id = UCLASS_RAM,
+ .of_match = cadence_ddr_ids,
+ .ops = &cadence_ddr_ops,
+ .probe = cadence_ddr_probe,
+ .priv_auto = sizeof(struct cadence_ddr_info),
+ .flags = DM_FLAG_PRE_RELOC,
+};
diff --git a/include/configs/rzn1-snarc.h b/include/configs/rzn1-snarc.h
new file mode 100644
index 0000000000..9fee2ece54
--- /dev/null
+++ b/include/configs/rzn1-snarc.h
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Configuration settings for the Schneider RZ/N1 board
+ */
+
+#ifndef __RZN1_SNARC_H
+#define __RZN1_SNARC_H
+
+/* Internal RAM */
+#define CFG_SYS_INIT_RAM_ADDR 0x20000000
+#define CFG_SYS_INIT_RAM_SIZE (1 * 1024 * 1024)
+
+#endif /* __RZN1_SNARC_H */
diff --git a/include/renesas/is43tr16256a_125k_CTL.h b/include/renesas/is43tr16256a_125k_CTL.h
new file mode 100644
index 0000000000..fabc2c7b79
--- /dev/null
+++ b/include/renesas/is43tr16256a_125k_CTL.h
@@ -0,0 +1,419 @@
+
+/* ****************************************************************
+ * CADENCE Copyright (c) 2001-2011 *
+ * Cadence Design Systems, Inc. *
+ * All rights reserved. *
+ * *
+ ******************************************************************
+ * The values calculated from this script are meant to be *
+ * representative programmings. The values may not reflect the *
+ * actual required programming for production use. Please *
+ * closely review all programmed values for technical accuracy *
+ * before use in production parts. *
+ ******************************************************************
+ *
+ * Module: regconfig.h
+ * Documentation: Register programming header file
+ *
+ ******************************************************************
+ ******************************************************************
+ * WARNING: This file was automatically generated. Manual
+ * editing may result in undetermined behavior.
+ ******************************************************************
+ ******************************************************************/
+// REL: renesas.germany-LCES_DDR__2014-05-21
+
+// ********************************************************************
+// Option: IP : IP Mode = CTL
+// Option: BL : Burst Length = 8
+// Option: CL : CAS Latency = 8
+// Option: MHZ : Simulation MHz = 500
+// Option: AP : Auto Precharge Mode (0/1) = 0
+// Option: DLLBP : DLL Bypass Mode (0/1) = 1
+// Option: HALF : Half-Memory Support (0/1) = 0
+// Option: RDIMM : Registered Dimm Support (0/1) = 0
+// Option: AL : Additive Latency = 0
+// Option: RSV3 : Reserved (0) = 0
+// Option: TCK : Simulation period in ns =
+// Option: RDDBIEN : Read DBI Enable (0/1) = 0
+// Option: SOMA : Memory-SOMA file(s) = is43tr16256a_125k_xml.soma
+// ********************************************************************
+// Memory: is43tr16256a_125k_xml.soma
+// ********************************************************************
+
+#define DENALI_CTL_00_DATA 0x00000600 // VERSION:RD:16:16:=0x0000 DRAM_CLASS:RW:8:4:=0x06 START:RW:0:1:=0x00
+#define DENALI_CTL_01_DATA 0x00000000 // READ_DATA_FIFO_DEPTH:RD:24:8:=0x00 MAX_CS_REG:RD:16:2:=0x00 MAX_COL_REG:RD:8:4:=0x00 MAX_ROW_REG:RD:0:5:=0x00
+#define DENALI_CTL_02_DATA 0x00000000 // ASYNC_CDC_STAGES:RD:24:8:=0x00 WRITE_DATA_FIFO_PTR_WIDTH:RD:16:8:=0x00 WRITE_DATA_FIFO_DEPTH:RD:8:8:=0x00 READ_DATA_FIFO_PTR_WIDTH:RD:0:8:=0x00
+#define DENALI_CTL_03_DATA 0x00000000 // AXI0_WRCMD_PROC_FIFO_LOG2_DEPTH:RD:24:8:=0x00 AXI0_WRFIFO_LOG2_DEPTH:RD:16:8:=0x00 AXI0_RDFIFO_LOG2_DEPTH:RD:8:8:=0x00 AXI0_CMDFIFO_LOG2_DEPTH:RD:0:8:=0x00
+#define DENALI_CTL_04_DATA 0x00000000 // AXI1_WRCMD_PROC_FIFO_LOG2_DEPTH:RD:24:8:=0x00 AXI1_WRFIFO_LOG2_DEPTH:RD:16:8:=0x00 AXI1_RDFIFO_LOG2_DEPTH:RD:8:8:=0x00 AXI1_CMDFIFO_LOG2_DEPTH:RD:0:8:=0x00
+#define DENALI_CTL_05_DATA 0x00000000 // AXI2_WRCMD_PROC_FIFO_LOG2_DEPTH:RD:24:8:=0x00 AXI2_WRFIFO_LOG2_DEPTH:RD:16:8:=0x00 AXI2_RDFIFO_LOG2_DEPTH:RD:8:8:=0x00 AXI2_CMDFIFO_LOG2_DEPTH:RD:0:8:=0x00
+#define DENALI_CTL_06_DATA 0x00000000 // AXI3_WRCMD_PROC_FIFO_LOG2_DEPTH:RD:24:8:=0x00 AXI3_WRFIFO_LOG2_DEPTH:RD:16:8:=0x00 AXI3_RDFIFO_LOG2_DEPTH:RD:8:8:=0x00 AXI3_CMDFIFO_LOG2_DEPTH:RD:0:8:=0x00
+#define DENALI_CTL_07_DATA 0x00000005 // TINIT:RW:0:24:=0x000005
+#define DENALI_CTL_08_DATA 0x000186a0 // TRST_PWRON:RW:0:32:=0x000186a0
+#define DENALI_CTL_09_DATA 0x0003d090 // CKE_INACTIVE:RW:0:32:=0x0003d090
+#define DENALI_CTL_10_DATA 0x00000000 // TCPD:RW:8:16:=0x0000 INITAREF:RW:0:4:=0x00
+#define DENALI_CTL_11_DATA 0x10000200 // CASLAT_LIN:RW:24:6:=0x10 NO_CMD_INIT:RW:16:1:=0x00 TDLL:RW:0:16:=0x0200
+#define DENALI_CTL_12_DATA 0x04040006 // TCCD:RW:24:5:=0x04 TBST_INT_INTERVAL:RW:16:3:=0x04 ADDITIVE_LAT:RW:8:5:=0x00 WRLAT:RW:0:5:=0x06
+#define DENALI_CTL_13_DATA 0x04121904 // TWTR:RW:24:6:=0x04 TRAS_MIN:RW:16:8:=0x12 TRC:RW:8:8:=0x19 TRRD:RW:0:8:=0x04
+#define DENALI_CTL_14_DATA 0x04041407 // TMRD:RW:24:5:=0x04 TRTP:RW:16:4:=0x04 TFAW:RW:8:6:=0x14 TRP:RW:0:5:=0x07
+#define DENALI_CTL_15_DATA 0x00891c0c // TRAS_MAX:RW:8:17:=0x00891c TMOD:RW:0:8:=0x0c
+#define DENALI_CTL_16_DATA 0x07000503 // TRCD:RW:24:8:=0x07 WRITEINTERP:RW:16:1:=0x00 TCKESR:RW:8:8:=0x05 TCKE:RW:0:3:=0x03
+#define DENALI_CTL_17_DATA 0x01010008 // TRAS_LOCKOUT:RW:24:1:=0x01 CONCURRENTAP:RW:16:1:=0x01 AP:RW:8:1:=0x00 TWR:RW:0:6:=0x08
+#define DENALI_CTL_18_DATA 0x0007030f // REG_DIMM_ENABLE:RW:24:1:=0x00 TRP_AB:RW:16:5:=0x07 BSTLEN:RW_D:8:3:=0x03 TDAL:RW:0:6:=0x0f
+#define DENALI_CTL_19_DATA 0x01000000 // TREF_ENABLE:RW:24:1:=0x01 RESERVED:RW:16:1:=0x00 AREFRESH:WR:8:1:=0x00 ADDRESS_MIRRORING:RW:0:2:=0x00
+#define DENALI_CTL_20_DATA 0x0f340082 // TREF:RW:16:14:=0x0f34 TRFC:RW:0:10:=0x0082
+#define DENALI_CTL_21_DATA 0x00000005 // TREF_INTERVAL:RW:0:14:=0x0005
+#define DENALI_CTL_22_DATA 0x000c0003 // TXPDLL:RW:16:16:=0x000c TPDEX:RW:0:16:=0x0003
+#define DENALI_CTL_23_DATA 0x00000000 // TXARDS:RW:16:16:=0x0000 TXARD:RW:0:16:=0x0000
+#define DENALI_CTL_24_DATA 0x00870200 // TXSNR:RW:16:16:=0x0087 TXSR:RW:0:16:=0x0200
+#define DENALI_CTL_25_DATA 0x00010000 // CKE_DELAY:RW:24:3:=0x00 ENABLE_QUICK_SREFRESH:RW:16:1:=0x01 SREFRESH_EXIT_NO_REFRESH:RW:8:1:=0x00 PWRUP_SREFRESH_EXIT:RW:0:1:=0x00
+#define DENALI_CTL_26_DATA 0x00050500 // LP_CMD:WR:24:8:=0x00 CKSRX:RW:16:8:=0x05 CKSRE:RW:8:8:=0x05 LOWPOWER_REFRESH_ENABLE:RW:0:2:=0x00
+#define DENALI_CTL_27_DATA 0x00000000 // LP_AUTO_EXIT_EN:RW:24:3:=0x00 LP_AUTO_ENTRY_EN:RW:16:3:=0x00 LP_ARB_STATE:RD:8:4:=0x00 LP_STATE:RD:0:6:=0x00
+#define DENALI_CTL_28_DATA 0x00000000 // LP_AUTO_SR_IDLE:RW:24:8:=0x00 LP_AUTO_PD_IDLE:RW:8:12:=0x0000 LP_AUTO_MEM_GATE_EN:RW:0:2:=0x00
+#define DENALI_CTL_29_DATA 0x00000000 // RESERVED:RW:8:7:=0x00 LP_AUTO_SR_MC_GATE_IDLE:RW:0:8:=0x00
+#define DENALI_CTL_30_DATA 0x00000000 // WRITE_MODEREG:RW+:0:26:=0x00000000
+#define DENALI_CTL_31_DATA 0x00084000 // MR0_DATA_0:RW:8:16:=0x0840 MRW_STATUS:RD:0:8:=0x00
+#define DENALI_CTL_32_DATA 0x00080046 // MR2_DATA_0:RW:16:16:=0x0008 MR1_DATA_0:RW:0:16:=0x0046
+#define DENALI_CTL_33_DATA 0x00000000 // MR3_DATA_0:RW:16:16:=0x0000 MRSINGLE_DATA_0:RW:0:16:=0x0000
+#define DENALI_CTL_34_DATA 0x00460840 // MR1_DATA_1:RW:16:16:=0x0046 MR0_DATA_1:RW:0:16:=0x0840
+#define DENALI_CTL_35_DATA 0x00000008 // MRSINGLE_DATA_1:RW:16:16:=0x0000 MR2_DATA_1:RW:0:16:=0x0008
+#define DENALI_CTL_36_DATA 0x00010000 // FWC:WR:24:1:=0x00 ECC_EN:RW:16:1:=0x01 MR3_DATA_1:RW:0:16:=0x0000
+#define DENALI_CTL_37_DATA 0x00000000 // ECC_DISABLE_W_UC_ERR:RW:16:1:=0x00 XOR_CHECK_BITS:RW:0:14:=0x0000
+#define DENALI_CTL_38_DATA 0x00000000 // ECC_U_ADDR:RD:0:32:=0x00000000
+#define DENALI_CTL_39_DATA 0x00000000 // ECC_U_SYND:RD:0:7:=0x00
+#define DENALI_CTL_40_DATA 0x00000000 // ECC_U_DATA:RD:0:32:=0x00000000
+#define DENALI_CTL_41_DATA 0x00000000 // ECC_C_ADDR:RD:0:32:=0x00000000
+#define DENALI_CTL_42_DATA 0x00000000 // ECC_C_SYND:RD:0:7:=0x00
+#define DENALI_CTL_43_DATA 0x00000000 // ECC_C_DATA:RD:0:32:=0x00000000
+#define DENALI_CTL_44_DATA 0x00000000 // LONG_COUNT_MASK:RW:16:5:=0x00 ECC_C_ID:RD:8:6:=0x00 ECC_U_ID:RD:0:6:=0x00
+#define DENALI_CTL_45_DATA 0x01000200 // ZQCL:RW:16:12:=0x0100 ZQINIT:RW_D:0:12:=0x0200
+#define DENALI_CTL_46_DATA 0x02000040 // ZQ_ON_SREF_EXIT:RW:24:2:=0x02 ZQ_REQ:WR:16:2:=0x00 ZQCS:RW:0:12:=0x0040
+#define DENALI_CTL_47_DATA 0x00000040 // ZQ_INTERVAL:RW:0:32:=0x00000040
+#define DENALI_CTL_48_DATA 0x01000100 // ROW_DIFF:RW:24:3:=0x01 BANK_DIFF:RW:16:2:=0x00 ZQCS_ROTATE:RW:8:1:=0x01 ZQ_IN_PROGRESS:RD:0:1:=0x00
+#define DENALI_CTL_49_DATA 0xffff0a01 // COMMAND_AGE_COUNT:RW:24:8:=0xff AGE_COUNT:RW:16:8:=0xff APREBIT:RW_D:8:4:=0x0a COL_DIFF:RW:0:4:=0x01
+#define DENALI_CTL_50_DATA 0x01010101 // PLACEMENT_EN:RW:24:1:=0x01 BANK_SPLIT_EN:RW:16:1:=0x01 RESERVED:RW:8:1:=0x01 ADDR_CMP_EN:RW:0:1:=0x01
+#define DENALI_CTL_51_DATA 0x01010101 // CS_SAME_EN:RW:24:1:=0x01 RW_SAME_PAGE_EN:RW:16:1:=0x01 RW_SAME_EN:RW:8:1:=0x01 PRIORITY_EN:RW:0:1:=0x01
+#define DENALI_CTL_52_DATA 0x01030101 // SWAP_EN:RW:24:1:=0x01 NUM_Q_ENTRIES_ACT_DISABLE:RW:16:3:=0x03 DISABLE_RW_GROUP_W_BNK_CONFLICT:RW:8:2:=0x01 W2R_SPLIT_EN:RW:0:1:=0x01
+#define DENALI_CTL_53_DATA 0x0c030000 // BURST_ON_FLY_BIT:RW:24:4:=0x0c CS_MAP:RW:16:2:=0x03 INHIBIT_DRAM_CMD:RW:8:1:=0x00 DISABLE_RD_INTERLEAVE:RW:0:1:=0x00
+#define DENALI_CTL_54_DATA 0x00000000 // CONTROLLER_BUSY:RD:24:1:=0x00 IN_ORDER_ACCEPT:RW:16:1:=0x00 Q_FULLNESS:RW:8:3:=0x00 REDUC:RW:0:1:=0x00
+#define DENALI_CTL_55_DATA 0x00000100 // CTRLUPD_REQ_PER_AREF_EN:RW:8:1:=0x01 CTRLUPD_REQ:WR:0:1:=0x00
+#define DENALI_CTL_56_DATA 0x00000000 // INT_STATUS:RD:0:23:=0x000000
+#define DENALI_CTL_57_DATA 0x00000000 // INT_ACK:WR:0:22:=0x000000
+#define DENALI_CTL_58_DATA 0x00000000 // INT_MASK:RW:0:23:=0x000000
+#define DENALI_CTL_59_DATA 0x00000000 // OUT_OF_RANGE_ADDR:RD:0:32:=0x00000000
+#define DENALI_CTL_60_DATA 0x00000000 // OUT_OF_RANGE_SOURCE_ID:RD:16:6:=0x00 OUT_OF_RANGE_TYPE:RD:8:6:=0x00 OUT_OF_RANGE_LENGTH:RD:0:7:=0x00
+#define DENALI_CTL_61_DATA 0x00000000 // PORT_CMD_ERROR_ADDR:RD:0:32:=0x00000000
+#define DENALI_CTL_62_DATA 0x01020000 // ODT_WR_MAP_CS0:RW:24:2:=0x01 ODT_RD_MAP_CS0:RW:16:2:=0x02 PORT_CMD_ERROR_TYPE:RD:8:3:=0x00 PORT_CMD_ERROR_ID:RD:0:6:=0x00
+#define DENALI_CTL_63_DATA 0x06050201 // TODTH_WR:RW:24:4:=0x06 TODTL_2CMD:RW:16:8:=0x05 ODT_WR_MAP_CS1:RW:8:2:=0x02 ODT_RD_MAP_CS1:RW:0:2:=0x01
+#define DENALI_CTL_64_DATA 0x02000106 // RD_TO_ODTH:RW:24:7:=0x02 WR_TO_ODTH:RW:16:7:=0x00 ODT_EN:RW:8:1:=0x01 TODTH_RD:RW:0:4:=0x06
+#define DENALI_CTL_65_DATA 0x00000000 //
+#define DENALI_CTL_66_DATA 0x02020202 // W2W_DIFFCS_DLY:RW_D:24:4:=0x02 W2R_DIFFCS_DLY:RW_D:16:3:=0x02 R2W_DIFFCS_DLY:RW_D:8:3:=0x02 R2R_DIFFCS_DLY:RW_D:0:3:=0x02
+#define DENALI_CTL_67_DATA 0x00000200 // W2W_SAMECS_DLY:RW:24:3:=0x00 W2R_SAMECS_DLY:RW:16:3:=0x00 R2W_SAMECS_DLY:RW_D:8:3:=0x02 R2R_SAMECS_DLY:RW:0:3:=0x00
+#define DENALI_CTL_68_DATA 0x00000000 // SWLVL_LOAD:WR:24:1:=0x00 SW_LEVELING_MODE:RW:16:2:=0x00 OCD_ADJUST_PUP_CS_0:RW:8:5:=0x00 OCD_ADJUST_PDN_CS_0:RW:0:5:=0x00
+#define DENALI_CTL_69_DATA 0x00000000 // LVL_STATUS:RD:24:4:=0x00 SWLVL_OP_DONE:RD:16:1:=0x00 SWLVL_EXIT:WR:8:1:=0x00 SWLVL_START:WR:0:1:=0x00
+#define DENALI_CTL_70_DATA 0x00000000 // WRLVL_REQ:WR:24:1:=0x00 SWLVL_RESP_2:RD:16:8:=0x00 SWLVL_RESP_1:RD:8:8:=0x00 SWLVL_RESP_0:RD:0:8:=0x00
+#define DENALI_CTL_71_DATA 0x00280d00 // WRLVL_EN:RW:24:1:=0x00 WLMRD:RW:16:6:=0x28 WLDQSEN:RW:8:6:=0x0d WRLVL_CS:RW:0:1:=0x00
+#define DENALI_CTL_72_DATA 0x00000000 // WRLVL_ERROR_STATUS:RD:24:8:=0x00 RESERVED:RW:16:3:=0x00 WRLVL_INTERVAL:RW:0:16:=0x0000
+#define DENALI_CTL_73_DATA 0x00000100 // WRLVL_DELAY_0:RW+:8:16:=0x0001 WRLVL_REG_EN:RW:0:1:=0x00
+#define DENALI_CTL_74_DATA 0x00010001 // WRLVL_DELAY_2:RW+:16:16:=0x0001 WRLVL_DELAY_1:RW+:0:16:=0x0001
+#define DENALI_CTL_75_DATA 0x00000000 // RDLVL_EDGE:RW:24:1:=0x00 RDLVL_CS:RW:16:1:=0x00 RDLVL_GATE_REQ:WR:8:1:=0x00 RDLVL_REQ:WR:0:1:=0x00
+#define DENALI_CTL_76_DATA 0x00000000 // RDLVL_GATE_REG_EN:RW:16:1:=0x00 RDLVL_REG_EN:RW:8:1:=0x00 RDLVL_BEGIN_DELAY_EN:RW:0:1:=0x00
+#define DENALI_CTL_77_DATA 0x00000000 // RDLVL_END_DELAY_0:RD:16:16:=0x0000 RDLVL_BEGIN_DELAY_0:RD:0:16:=0x0000
+#define DENALI_CTL_78_DATA 0x00000000 // RDLVL_OFFSET_DELAY_0:RW:16:16:=0x0000 RDLVL_MIDPOINT_DELAY_0:RD:0:16:=0x0000
+#define DENALI_CTL_79_DATA 0x00212100 // RDLVL_DELAY_0:RW:8:16:=0x2121 RDLVL_OFFSET_DIR_0:RW:0:1:=0x00
+#define DENALI_CTL_80_DATA 0x00000001 // RDLVL_BEGIN_DELAY_1:RD:16:16:=0x0000 RDLVL_GATE_DELAY_0:RW+:0:16:=0x0001
+#define DENALI_CTL_81_DATA 0x00000000 // RDLVL_MIDPOINT_DELAY_1:RD:16:16:=0x0000 RDLVL_END_DELAY_1:RD:0:16:=0x0000
+#define DENALI_CTL_82_DATA 0x00000000 // RDLVL_OFFSET_DIR_1:RW:16:1:=0x00 RDLVL_OFFSET_DELAY_1:RW:0:16:=0x0000
+#define DENALI_CTL_83_DATA 0x00012121 // RDLVL_GATE_DELAY_1:RW+:16:16:=0x0001 RDLVL_DELAY_1:RW:0:16:=0x2121
+#define DENALI_CTL_84_DATA 0x00000000 // RDLVL_END_DELAY_2:RD:16:16:=0x0000 RDLVL_BEGIN_DELAY_2:RD:0:16:=0x0000
+#define DENALI_CTL_85_DATA 0x00000000 // RDLVL_OFFSET_DELAY_2:RW:16:16:=0x0000 RDLVL_MIDPOINT_DELAY_2:RD:0:16:=0x0000
+#define DENALI_CTL_86_DATA 0x00212100 // RDLVL_DELAY_2:RW:8:16:=0x2121 RDLVL_OFFSET_DIR_2:RW:0:1:=0x00
+#define DENALI_CTL_87_DATA 0x02020001 // AXI0_W_PRIORITY:RW:24:2:=0x02 AXI0_R_PRIORITY:RW:16:2:=0x02 RDLVL_GATE_DELAY_2:RW+:0:16:=0x0001
+#define DENALI_CTL_88_DATA 0x00020200 // AXI1_FIFO_TYPE_REG:RW:24:2:=0x00 AXI1_W_PRIORITY:RW:16:2:=0x02 AXI1_R_PRIORITY:RW:8:2:=0x02 AXI0_FIFO_TYPE_REG:RW:0:2:=0x00
+#define DENALI_CTL_89_DATA 0x02000202 // AXI3_R_PRIORITY:RW:24:2:=0x02 AXI2_FIFO_TYPE_REG:RW:16:2:=0x00 AXI2_W_PRIORITY:RW:8:2:=0x02 AXI2_R_PRIORITY:RW:0:2:=0x02
+#define DENALI_CTL_90_DATA 0x01000002 // PORT_ADDR_PROTECTION_EN:RW:24:1:=0x01 AXI3_FIFO_TYPE_REG:RW:8:2:=0x00 AXI3_W_PRIORITY:RW:0:2:=0x02
+#define DENALI_CTL_91_DATA 0x00000000 // AXI0_START_ADDR_0:RW:0:18:=0x000000
+#define DENALI_CTL_92_DATA 0x0003ffff // AXI0_END_ADDR_0:RW:0:18:=0x03ffff
+#define DENALI_CTL_93_DATA 0x00000000 // AXI0_START_ADDR_1:RW:0:18:=0x000000
+#define DENALI_CTL_94_DATA 0x0003ffff // AXI0_END_ADDR_1:RW:0:18:=0x03ffff
+#define DENALI_CTL_95_DATA 0x00000000 // AXI0_START_ADDR_2:RW:0:18:=0x000000
+#define DENALI_CTL_96_DATA 0x0003ffff // AXI0_END_ADDR_2:RW:0:18:=0x03ffff
+#define DENALI_CTL_97_DATA 0x00000000 // AXI0_START_ADDR_3:RW:0:18:=0x000000
+#define DENALI_CTL_98_DATA 0x0003ffff // AXI0_END_ADDR_3:RW:0:18:=0x03ffff
+#define DENALI_CTL_99_DATA 0x00000000 // AXI0_START_ADDR_4:RW:0:18:=0x000000
+#define DENALI_CTL_100_DATA 0x0003ffff // AXI0_END_ADDR_4:RW:0:18:=0x03ffff
+#define DENALI_CTL_101_DATA 0x00000000 // AXI0_START_ADDR_5:RW:0:18:=0x000000
+#define DENALI_CTL_102_DATA 0x0003ffff // AXI0_END_ADDR_5:RW:0:18:=0x03ffff
+#define DENALI_CTL_103_DATA 0x00000000 // AXI0_START_ADDR_6:RW:0:18:=0x000000
+#define DENALI_CTL_104_DATA 0x0003ffff // AXI0_END_ADDR_6:RW:0:18:=0x03ffff
+#define DENALI_CTL_105_DATA 0x00000000 // AXI0_START_ADDR_7:RW:0:18:=0x000000
+#define DENALI_CTL_106_DATA 0x0003ffff // AXI0_END_ADDR_7:RW:0:18:=0x03ffff
+#define DENALI_CTL_107_DATA 0x00000000 // AXI0_START_ADDR_8:RW:0:18:=0x000000
+#define DENALI_CTL_108_DATA 0x0003ffff // AXI0_END_ADDR_8:RW:0:18:=0x03ffff
+#define DENALI_CTL_109_DATA 0x00000000 // AXI0_START_ADDR_9:RW:0:18:=0x000000
+#define DENALI_CTL_110_DATA 0x0003ffff // AXI0_END_ADDR_9:RW:0:18:=0x03ffff
+#define DENALI_CTL_111_DATA 0x00000000 // AXI0_START_ADDR_10:RW:0:18:=0x000000
+#define DENALI_CTL_112_DATA 0x0003ffff // AXI0_END_ADDR_10:RW:0:18:=0x03ffff
+#define DENALI_CTL_113_DATA 0x00000000 // AXI0_START_ADDR_11:RW:0:18:=0x000000
+#define DENALI_CTL_114_DATA 0x0003ffff // AXI0_END_ADDR_11:RW:0:18:=0x03ffff
+#define DENALI_CTL_115_DATA 0x00000000 // AXI0_START_ADDR_12:RW:0:18:=0x000000
+#define DENALI_CTL_116_DATA 0x0003ffff // AXI0_END_ADDR_12:RW:0:18:=0x03ffff
+#define DENALI_CTL_117_DATA 0x00000000 // AXI0_START_ADDR_13:RW:0:18:=0x000000
+#define DENALI_CTL_118_DATA 0x0003ffff // AXI0_END_ADDR_13:RW:0:18:=0x03ffff
+#define DENALI_CTL_119_DATA 0x00000000 // AXI0_START_ADDR_14:RW:0:18:=0x000000
+#define DENALI_CTL_120_DATA 0x0003ffff // AXI0_END_ADDR_14:RW:0:18:=0x03ffff
+#define DENALI_CTL_121_DATA 0x00000000 // AXI0_START_ADDR_15:RW:0:18:=0x000000
+#define DENALI_CTL_122_DATA 0x0003ffff // AXI0_END_ADDR_15:RW:0:18:=0x03ffff
+#define DENALI_CTL_123_DATA 0x00000000 // AXI1_START_ADDR_0:RW:0:18:=0x000000
+#define DENALI_CTL_124_DATA 0x0003ffff // AXI1_END_ADDR_0:RW:0:18:=0x03ffff
+#define DENALI_CTL_125_DATA 0x00000000 // AXI1_START_ADDR_1:RW:0:18:=0x000000
+#define DENALI_CTL_126_DATA 0x0003ffff // AXI1_END_ADDR_1:RW:0:18:=0x03ffff
+#define DENALI_CTL_127_DATA 0x00000000 // AXI1_START_ADDR_2:RW:0:18:=0x000000
+#define DENALI_CTL_128_DATA 0x0003ffff // AXI1_END_ADDR_2:RW:0:18:=0x03ffff
+#define DENALI_CTL_129_DATA 0x00000000 // AXI1_START_ADDR_3:RW:0:18:=0x000000
+#define DENALI_CTL_130_DATA 0x0003ffff // AXI1_END_ADDR_3:RW:0:18:=0x03ffff
+#define DENALI_CTL_131_DATA 0x00000000 // AXI1_START_ADDR_4:RW:0:18:=0x000000
+#define DENALI_CTL_132_DATA 0x0003ffff // AXI1_END_ADDR_4:RW:0:18:=0x03ffff
+#define DENALI_CTL_133_DATA 0x00000000 // AXI1_START_ADDR_5:RW:0:18:=0x000000
+#define DENALI_CTL_134_DATA 0x0003ffff // AXI1_END_ADDR_5:RW:0:18:=0x03ffff
+#define DENALI_CTL_135_DATA 0x00000000 // AXI1_START_ADDR_6:RW:0:18:=0x000000
+#define DENALI_CTL_136_DATA 0x0003ffff // AXI1_END_ADDR_6:RW:0:18:=0x03ffff
+#define DENALI_CTL_137_DATA 0x00000000 // AXI1_START_ADDR_7:RW:0:18:=0x000000
+#define DENALI_CTL_138_DATA 0x0003ffff // AXI1_END_ADDR_7:RW:0:18:=0x03ffff
+#define DENALI_CTL_139_DATA 0x00000000 // AXI1_START_ADDR_8:RW:0:18:=0x000000
+#define DENALI_CTL_140_DATA 0x0003ffff // AXI1_END_ADDR_8:RW:0:18:=0x03ffff
+#define DENALI_CTL_141_DATA 0x00000000 // AXI1_START_ADDR_9:RW:0:18:=0x000000
+#define DENALI_CTL_142_DATA 0x0003ffff // AXI1_END_ADDR_9:RW:0:18:=0x03ffff
+#define DENALI_CTL_143_DATA 0x00000000 // AXI1_START_ADDR_10:RW:0:18:=0x000000
+#define DENALI_CTL_144_DATA 0x0003ffff // AXI1_END_ADDR_10:RW:0:18:=0x03ffff
+#define DENALI_CTL_145_DATA 0x00000000 // AXI1_START_ADDR_11:RW:0:18:=0x000000
+#define DENALI_CTL_146_DATA 0x0003ffff // AXI1_END_ADDR_11:RW:0:18:=0x03ffff
+#define DENALI_CTL_147_DATA 0x00000000 // AXI1_START_ADDR_12:RW:0:18:=0x000000
+#define DENALI_CTL_148_DATA 0x0003ffff // AXI1_END_ADDR_12:RW:0:18:=0x03ffff
+#define DENALI_CTL_149_DATA 0x00000000 // AXI1_START_ADDR_13:RW:0:18:=0x000000
+#define DENALI_CTL_150_DATA 0x0003ffff // AXI1_END_ADDR_13:RW:0:18:=0x03ffff
+#define DENALI_CTL_151_DATA 0x00000000 // AXI1_START_ADDR_14:RW:0:18:=0x000000
+#define DENALI_CTL_152_DATA 0x0003ffff // AXI1_END_ADDR_14:RW:0:18:=0x03ffff
+#define DENALI_CTL_153_DATA 0x00000000 // AXI1_START_ADDR_15:RW:0:18:=0x000000
+#define DENALI_CTL_154_DATA 0x0003ffff // AXI1_END_ADDR_15:RW:0:18:=0x03ffff
+#define DENALI_CTL_155_DATA 0x00000000 // AXI2_START_ADDR_0:RW:0:18:=0x000000
+#define DENALI_CTL_156_DATA 0x0003ffff // AXI2_END_ADDR_0:RW:0:18:=0x03ffff
+#define DENALI_CTL_157_DATA 0x00000000 // AXI2_START_ADDR_1:RW:0:18:=0x000000
+#define DENALI_CTL_158_DATA 0x0003ffff // AXI2_END_ADDR_1:RW:0:18:=0x03ffff
+#define DENALI_CTL_159_DATA 0x00000000 // AXI2_START_ADDR_2:RW:0:18:=0x000000
+#define DENALI_CTL_160_DATA 0x0003ffff // AXI2_END_ADDR_2:RW:0:18:=0x03ffff
+#define DENALI_CTL_161_DATA 0x00000000 // AXI2_START_ADDR_3:RW:0:18:=0x000000
+#define DENALI_CTL_162_DATA 0x0003ffff // AXI2_END_ADDR_3:RW:0:18:=0x03ffff
+#define DENALI_CTL_163_DATA 0x00000000 // AXI2_START_ADDR_4:RW:0:18:=0x000000
+#define DENALI_CTL_164_DATA 0x0003ffff // AXI2_END_ADDR_4:RW:0:18:=0x03ffff
+#define DENALI_CTL_165_DATA 0x00000000 // AXI2_START_ADDR_5:RW:0:18:=0x000000
+#define DENALI_CTL_166_DATA 0x0003ffff // AXI2_END_ADDR_5:RW:0:18:=0x03ffff
+#define DENALI_CTL_167_DATA 0x00000000 // AXI2_START_ADDR_6:RW:0:18:=0x000000
+#define DENALI_CTL_168_DATA 0x0003ffff // AXI2_END_ADDR_6:RW:0:18:=0x03ffff
+#define DENALI_CTL_169_DATA 0x00000000 // AXI2_START_ADDR_7:RW:0:18:=0x000000
+#define DENALI_CTL_170_DATA 0x0003ffff // AXI2_END_ADDR_7:RW:0:18:=0x03ffff
+#define DENALI_CTL_171_DATA 0x00000000 // AXI2_START_ADDR_8:RW:0:18:=0x000000
+#define DENALI_CTL_172_DATA 0x0003ffff // AXI2_END_ADDR_8:RW:0:18:=0x03ffff
+#define DENALI_CTL_173_DATA 0x00000000 // AXI2_START_ADDR_9:RW:0:18:=0x000000
+#define DENALI_CTL_174_DATA 0x0003ffff // AXI2_END_ADDR_9:RW:0:18:=0x03ffff
+#define DENALI_CTL_175_DATA 0x00000000 // AXI2_START_ADDR_10:RW:0:18:=0x000000
+#define DENALI_CTL_176_DATA 0x0003ffff // AXI2_END_ADDR_10:RW:0:18:=0x03ffff
+#define DENALI_CTL_177_DATA 0x00000000 // AXI2_START_ADDR_11:RW:0:18:=0x000000
+#define DENALI_CTL_178_DATA 0x0003ffff // AXI2_END_ADDR_11:RW:0:18:=0x03ffff
+#define DENALI_CTL_179_DATA 0x00000000 // AXI2_START_ADDR_12:RW:0:18:=0x000000
+#define DENALI_CTL_180_DATA 0x0003ffff // AXI2_END_ADDR_12:RW:0:18:=0x03ffff
+#define DENALI_CTL_181_DATA 0x00000000 // AXI2_START_ADDR_13:RW:0:18:=0x000000
+#define DENALI_CTL_182_DATA 0x0003ffff // AXI2_END_ADDR_13:RW:0:18:=0x03ffff
+#define DENALI_CTL_183_DATA 0x00000000 // AXI2_START_ADDR_14:RW:0:18:=0x000000
+#define DENALI_CTL_184_DATA 0x0003ffff // AXI2_END_ADDR_14:RW:0:18:=0x03ffff
+#define DENALI_CTL_185_DATA 0x00000000 // AXI2_START_ADDR_15:RW:0:18:=0x000000
+#define DENALI_CTL_186_DATA 0x0003ffff // AXI2_END_ADDR_15:RW:0:18:=0x03ffff
+#define DENALI_CTL_187_DATA 0x00000000 // AXI3_START_ADDR_0:RW:0:18:=0x000000
+#define DENALI_CTL_188_DATA 0x0003ffff // AXI3_END_ADDR_0:RW:0:18:=0x03ffff
+#define DENALI_CTL_189_DATA 0x00000000 // AXI3_START_ADDR_1:RW:0:18:=0x000000
+#define DENALI_CTL_190_DATA 0x0003ffff // AXI3_END_ADDR_1:RW:0:18:=0x03ffff
+#define DENALI_CTL_191_DATA 0x00000000 // AXI3_START_ADDR_2:RW:0:18:=0x000000
+#define DENALI_CTL_192_DATA 0x0003ffff // AXI3_END_ADDR_2:RW:0:18:=0x03ffff
+#define DENALI_CTL_193_DATA 0x00000000 // AXI3_START_ADDR_3:RW:0:18:=0x000000
+#define DENALI_CTL_194_DATA 0x0003ffff // AXI3_END_ADDR_3:RW:0:18:=0x03ffff
+#define DENALI_CTL_195_DATA 0x00000000 // AXI3_START_ADDR_4:RW:0:18:=0x000000
+#define DENALI_CTL_196_DATA 0x0003ffff // AXI3_END_ADDR_4:RW:0:18:=0x03ffff
+#define DENALI_CTL_197_DATA 0x00000000 // AXI3_START_ADDR_5:RW:0:18:=0x000000
+#define DENALI_CTL_198_DATA 0x0003ffff // AXI3_END_ADDR_5:RW:0:18:=0x03ffff
+#define DENALI_CTL_199_DATA 0x00000000 // AXI3_START_ADDR_6:RW:0:18:=0x000000
+#define DENALI_CTL_200_DATA 0x0003ffff // AXI3_END_ADDR_6:RW:0:18:=0x03ffff
+#define DENALI_CTL_201_DATA 0x00000000 // AXI3_START_ADDR_7:RW:0:18:=0x000000
+#define DENALI_CTL_202_DATA 0x0003ffff // AXI3_END_ADDR_7:RW:0:18:=0x03ffff
+#define DENALI_CTL_203_DATA 0x00000000 // AXI3_START_ADDR_8:RW:0:18:=0x000000
+#define DENALI_CTL_204_DATA 0x0003ffff // AXI3_END_ADDR_8:RW:0:18:=0x03ffff
+#define DENALI_CTL_205_DATA 0x00000000 // AXI3_START_ADDR_9:RW:0:18:=0x000000
+#define DENALI_CTL_206_DATA 0x0003ffff // AXI3_END_ADDR_9:RW:0:18:=0x03ffff
+#define DENALI_CTL_207_DATA 0x00000000 // AXI3_START_ADDR_10:RW:0:18:=0x000000
+#define DENALI_CTL_208_DATA 0x0003ffff // AXI3_END_ADDR_10:RW:0:18:=0x03ffff
+#define DENALI_CTL_209_DATA 0x00000000 // AXI3_START_ADDR_11:RW:0:18:=0x000000
+#define DENALI_CTL_210_DATA 0x0003ffff // AXI3_END_ADDR_11:RW:0:18:=0x03ffff
+#define DENALI_CTL_211_DATA 0x00000000 // AXI3_START_ADDR_12:RW:0:18:=0x000000
+#define DENALI_CTL_212_DATA 0x0003ffff // AXI3_END_ADDR_12:RW:0:18:=0x03ffff
+#define DENALI_CTL_213_DATA 0x00000000 // AXI3_START_ADDR_13:RW:0:18:=0x000000
+#define DENALI_CTL_214_DATA 0x0003ffff // AXI3_END_ADDR_13:RW:0:18:=0x03ffff
+#define DENALI_CTL_215_DATA 0x00000000 // AXI3_START_ADDR_14:RW:0:18:=0x000000
+#define DENALI_CTL_216_DATA 0x0003ffff // AXI3_END_ADDR_14:RW:0:18:=0x03ffff
+#define DENALI_CTL_217_DATA 0x00000000 // AXI3_START_ADDR_15:RW:0:18:=0x000000
+#define DENALI_CTL_218_DATA 0x0303ffff // AXI0_RANGE_PROT_BITS_0:RW:24:2:=0x03 AXI3_END_ADDR_15:RW:0:18:=0x03ffff
+#define DENALI_CTL_219_DATA 0xffffffff // AXI0_RANGE_WID_CHECK_BITS_0:RW:16:16:=0xffff AXI0_RANGE_RID_CHECK_BITS_0:RW:0:16:=0xffff
+#define DENALI_CTL_220_DATA 0x00030f0f // AXI0_RANGE_PROT_BITS_1:RW:16:2:=0x03 AXI0_RANGE_WID_CHECK_BITS_ID_LOOKUP_0:RW:8:4:=0x0f AXI0_RANGE_RID_CHECK_BITS_ID_LOOKUP_0:RW:0:4:=0x0f
+#define DENALI_CTL_221_DATA 0xffffffff // AXI0_RANGE_WID_CHECK_BITS_1:RW:16:16:=0xffff AXI0_RANGE_RID_CHECK_BITS_1:RW:0:16:=0xffff
+#define DENALI_CTL_222_DATA 0x00030f0f // AXI0_RANGE_PROT_BITS_2:RW:16:2:=0x03 AXI0_RANGE_WID_CHECK_BITS_ID_LOOKUP_1:RW:8:4:=0x0f AXI0_RANGE_RID_CHECK_BITS_ID_LOOKUP_1:RW:0:4:=0x0f
+#define DENALI_CTL_223_DATA 0xffffffff // AXI0_RANGE_WID_CHECK_BITS_2:RW:16:16:=0xffff AXI0_RANGE_RID_CHECK_BITS_2:RW:0:16:=0xffff
+#define DENALI_CTL_224_DATA 0x00030f0f // AXI0_RANGE_PROT_BITS_3:RW:16:2:=0x03 AXI0_RANGE_WID_CHECK_BITS_ID_LOOKUP_2:RW:8:4:=0x0f AXI0_RANGE_RID_CHECK_BITS_ID_LOOKUP_2:RW:0:4:=0x0f
+#define DENALI_CTL_225_DATA 0xffffffff // AXI0_RANGE_WID_CHECK_BITS_3:RW:16:16:=0xffff AXI0_RANGE_RID_CHECK_BITS_3:RW:0:16:=0xffff
+#define DENALI_CTL_226_DATA 0x00030f0f // AXI0_RANGE_PROT_BITS_4:RW:16:2:=0x03 AXI0_RANGE_WID_CHECK_BITS_ID_LOOKUP_3:RW:8:4:=0x0f AXI0_RANGE_RID_CHECK_BITS_ID_LOOKUP_3:RW:0:4:=0x0f
+#define DENALI_CTL_227_DATA 0xffffffff // AXI0_RANGE_WID_CHECK_BITS_4:RW:16:16:=0xffff AXI0_RANGE_RID_CHECK_BITS_4:RW:0:16:=0xffff
+#define DENALI_CTL_228_DATA 0x00030f0f // AXI0_RANGE_PROT_BITS_5:RW:16:2:=0x03 AXI0_RANGE_WID_CHECK_BITS_ID_LOOKUP_4:RW:8:4:=0x0f AXI0_RANGE_RID_CHECK_BITS_ID_LOOKUP_4:RW:0:4:=0x0f
+#define DENALI_CTL_229_DATA 0xffffffff // AXI0_RANGE_WID_CHECK_BITS_5:RW:16:16:=0xffff AXI0_RANGE_RID_CHECK_BITS_5:RW:0:16:=0xffff
+#define DENALI_CTL_230_DATA 0x00030f0f // AXI0_RANGE_PROT_BITS_6:RW:16:2:=0x03 AXI0_RANGE_WID_CHECK_BITS_ID_LOOKUP_5:RW:8:4:=0x0f AXI0_RANGE_RID_CHECK_BITS_ID_LOOKUP_5:RW:0:4:=0x0f
+#define DENALI_CTL_231_DATA 0xffffffff // AXI0_RANGE_WID_CHECK_BITS_6:RW:16:16:=0xffff AXI0_RANGE_RID_CHECK_BITS_6:RW:0:16:=0xffff
+#define DENALI_CTL_232_DATA 0x00030f0f // AXI0_RANGE_PROT_BITS_7:RW:16:2:=0x03 AXI0_RANGE_WID_CHECK_BITS_ID_LOOKUP_6:RW:8:4:=0x0f AXI0_RANGE_RID_CHECK_BITS_ID_LOOKUP_6:RW:0:4:=0x0f
+#define DENALI_CTL_233_DATA 0xffffffff // AXI0_RANGE_WID_CHECK_BITS_7:RW:16:16:=0xffff AXI0_RANGE_RID_CHECK_BITS_7:RW:0:16:=0xffff
+#define DENALI_CTL_234_DATA 0x00030f0f // AXI0_RANGE_PROT_BITS_8:RW:16:2:=0x03 AXI0_RANGE_WID_CHECK_BITS_ID_LOOKUP_7:RW:8:4:=0x0f AXI0_RANGE_RID_CHECK_BITS_ID_LOOKUP_7:RW:0:4:=0x0f
+#define DENALI_CTL_235_DATA 0xffffffff // AXI0_RANGE_WID_CHECK_BITS_8:RW:16:16:=0xffff AXI0_RANGE_RID_CHECK_BITS_8:RW:0:16:=0xffff
+#define DENALI_CTL_236_DATA 0x00030f0f // AXI0_RANGE_PROT_BITS_9:RW:16:2:=0x03 AXI0_RANGE_WID_CHECK_BITS_ID_LOOKUP_8:RW:8:4:=0x0f AXI0_RANGE_RID_CHECK_BITS_ID_LOOKUP_8:RW:0:4:=0x0f
+#define DENALI_CTL_237_DATA 0xffffffff // AXI0_RANGE_WID_CHECK_BITS_9:RW:16:16:=0xffff AXI0_RANGE_RID_CHECK_BITS_9:RW:0:16:=0xffff
+#define DENALI_CTL_238_DATA 0x00030f0f // AXI0_RANGE_PROT_BITS_10:RW:16:2:=0x03 AXI0_RANGE_WID_CHECK_BITS_ID_LOOKUP_9:RW:8:4:=0x0f AXI0_RANGE_RID_CHECK_BITS_ID_LOOKUP_9:RW:0:4:=0x0f
+#define DENALI_CTL_239_DATA 0xffffffff // AXI0_RANGE_WID_CHECK_BITS_10:RW:16:16:=0xffff AXI0_RANGE_RID_CHECK_BITS_10:RW:0:16:=0xffff
+#define DENALI_CTL_240_DATA 0x00030f0f // AXI0_RANGE_PROT_BITS_11:RW:16:2:=0x03 AXI0_RANGE_WID_CHECK_BITS_ID_LOOKUP_10:RW:8:4:=0x0f AXI0_RANGE_RID_CHECK_BITS_ID_LOOKUP_10:RW:0:4:=0x0f
+#define DENALI_CTL_241_DATA 0xffffffff // AXI0_RANGE_WID_CHECK_BITS_11:RW:16:16:=0xffff AXI0_RANGE_RID_CHECK_BITS_11:RW:0:16:=0xffff
+#define DENALI_CTL_242_DATA 0x00030f0f // AXI0_RANGE_PROT_BITS_12:RW:16:2:=0x03 AXI0_RANGE_WID_CHECK_BITS_ID_LOOKUP_11:RW:8:4:=0x0f AXI0_RANGE_RID_CHECK_BITS_ID_LOOKUP_11:RW:0:4:=0x0f
+#define DENALI_CTL_243_DATA 0xffffffff // AXI0_RANGE_WID_CHECK_BITS_12:RW:16:16:=0xffff AXI0_RANGE_RID_CHECK_BITS_12:RW:0:16:=0xffff
+#define DENALI_CTL_244_DATA 0x00030f0f // AXI0_RANGE_PROT_BITS_13:RW:16:2:=0x03 AXI0_RANGE_WID_CHECK_BITS_ID_LOOKUP_12:RW:8:4:=0x0f AXI0_RANGE_RID_CHECK_BITS_ID_LOOKUP_12:RW:0:4:=0x0f
+#define DENALI_CTL_245_DATA 0xffffffff // AXI0_RANGE_WID_CHECK_BITS_13:RW:16:16:=0xffff AXI0_RANGE_RID_CHECK_BITS_13:RW:0:16:=0xffff
+#define DENALI_CTL_246_DATA 0x00030f0f // AXI0_RANGE_PROT_BITS_14:RW:16:2:=0x03 AXI0_RANGE_WID_CHECK_BITS_ID_LOOKUP_13:RW:8:4:=0x0f AXI0_RANGE_RID_CHECK_BITS_ID_LOOKUP_13:RW:0:4:=0x0f
+#define DENALI_CTL_247_DATA 0xffffffff // AXI0_RANGE_WID_CHECK_BITS_14:RW:16:16:=0xffff AXI0_RANGE_RID_CHECK_BITS_14:RW:0:16:=0xffff
+#define DENALI_CTL_248_DATA 0x00030f0f // AXI0_RANGE_PROT_BITS_15:RW:16:2:=0x03 AXI0_RANGE_WID_CHECK_BITS_ID_LOOKUP_14:RW:8:4:=0x0f AXI0_RANGE_RID_CHECK_BITS_ID_LOOKUP_14:RW:0:4:=0x0f
+#define DENALI_CTL_249_DATA 0xffffffff // AXI0_RANGE_WID_CHECK_BITS_15:RW:16:16:=0xffff AXI0_RANGE_RID_CHECK_BITS_15:RW:0:16:=0xffff
+#define DENALI_CTL_250_DATA 0x00030f0f // AXI1_RANGE_PROT_BITS_0:RW:16:2:=0x03 AXI0_RANGE_WID_CHECK_BITS_ID_LOOKUP_15:RW:8:4:=0x0f AXI0_RANGE_RID_CHECK_BITS_ID_LOOKUP_15:RW:0:4:=0x0f
+#define DENALI_CTL_251_DATA 0xffffffff // AXI1_RANGE_WID_CHECK_BITS_0:RW:16:16:=0xffff AXI1_RANGE_RID_CHECK_BITS_0:RW:0:16:=0xffff
+#define DENALI_CTL_252_DATA 0x00030f0f // AXI1_RANGE_PROT_BITS_1:RW:16:2:=0x03 AXI1_RANGE_WID_CHECK_BITS_ID_LOOKUP_0:RW:8:4:=0x0f AXI1_RANGE_RID_CHECK_BITS_ID_LOOKUP_0:RW:0:4:=0x0f
+#define DENALI_CTL_253_DATA 0xffffffff // AXI1_RANGE_WID_CHECK_BITS_1:RW:16:16:=0xffff AXI1_RANGE_RID_CHECK_BITS_1:RW:0:16:=0xffff
+#define DENALI_CTL_254_DATA 0x00030f0f // AXI1_RANGE_PROT_BITS_2:RW:16:2:=0x03 AXI1_RANGE_WID_CHECK_BITS_ID_LOOKUP_1:RW:8:4:=0x0f AXI1_RANGE_RID_CHECK_BITS_ID_LOOKUP_1:RW:0:4:=0x0f
+#define DENALI_CTL_255_DATA 0xffffffff // AXI1_RANGE_WID_CHECK_BITS_2:RW:16:16:=0xffff AXI1_RANGE_RID_CHECK_BITS_2:RW:0:16:=0xffff
+#define DENALI_CTL_256_DATA 0x00030f0f // AXI1_RANGE_PROT_BITS_3:RW:16:2:=0x03 AXI1_RANGE_WID_CHECK_BITS_ID_LOOKUP_2:RW:8:4:=0x0f AXI1_RANGE_RID_CHECK_BITS_ID_LOOKUP_2:RW:0:4:=0x0f
+#define DENALI_CTL_257_DATA 0xffffffff // AXI1_RANGE_WID_CHECK_BITS_3:RW:16:16:=0xffff AXI1_RANGE_RID_CHECK_BITS_3:RW:0:16:=0xffff
+#define DENALI_CTL_258_DATA 0x00030f0f // AXI1_RANGE_PROT_BITS_4:RW:16:2:=0x03 AXI1_RANGE_WID_CHECK_BITS_ID_LOOKUP_3:RW:8:4:=0x0f AXI1_RANGE_RID_CHECK_BITS_ID_LOOKUP_3:RW:0:4:=0x0f
+#define DENALI_CTL_259_DATA 0xffffffff // AXI1_RANGE_WID_CHECK_BITS_4:RW:16:16:=0xffff AXI1_RANGE_RID_CHECK_BITS_4:RW:0:16:=0xffff
+#define DENALI_CTL_260_DATA 0x00030f0f // AXI1_RANGE_PROT_BITS_5:RW:16:2:=0x03 AXI1_RANGE_WID_CHECK_BITS_ID_LOOKUP_4:RW:8:4:=0x0f AXI1_RANGE_RID_CHECK_BITS_ID_LOOKUP_4:RW:0:4:=0x0f
+#define DENALI_CTL_261_DATA 0xffffffff // AXI1_RANGE_WID_CHECK_BITS_5:RW:16:16:=0xffff AXI1_RANGE_RID_CHECK_BITS_5:RW:0:16:=0xffff
+#define DENALI_CTL_262_DATA 0x00030f0f // AXI1_RANGE_PROT_BITS_6:RW:16:2:=0x03 AXI1_RANGE_WID_CHECK_BITS_ID_LOOKUP_5:RW:8:4:=0x0f AXI1_RANGE_RID_CHECK_BITS_ID_LOOKUP_5:RW:0:4:=0x0f
+#define DENALI_CTL_263_DATA 0xffffffff // AXI1_RANGE_WID_CHECK_BITS_6:RW:16:16:=0xffff AXI1_RANGE_RID_CHECK_BITS_6:RW:0:16:=0xffff
+#define DENALI_CTL_264_DATA 0x00030f0f // AXI1_RANGE_PROT_BITS_7:RW:16:2:=0x03 AXI1_RANGE_WID_CHECK_BITS_ID_LOOKUP_6:RW:8:4:=0x0f AXI1_RANGE_RID_CHECK_BITS_ID_LOOKUP_6:RW:0:4:=0x0f
+#define DENALI_CTL_265_DATA 0xffffffff // AXI1_RANGE_WID_CHECK_BITS_7:RW:16:16:=0xffff AXI1_RANGE_RID_CHECK_BITS_7:RW:0:16:=0xffff
+#define DENALI_CTL_266_DATA 0x00030f0f // AXI1_RANGE_PROT_BITS_8:RW:16:2:=0x03 AXI1_RANGE_WID_CHECK_BITS_ID_LOOKUP_7:RW:8:4:=0x0f AXI1_RANGE_RID_CHECK_BITS_ID_LOOKUP_7:RW:0:4:=0x0f
+#define DENALI_CTL_267_DATA 0xffffffff // AXI1_RANGE_WID_CHECK_BITS_8:RW:16:16:=0xffff AXI1_RANGE_RID_CHECK_BITS_8:RW:0:16:=0xffff
+#define DENALI_CTL_268_DATA 0x00030f0f // AXI1_RANGE_PROT_BITS_9:RW:16:2:=0x03 AXI1_RANGE_WID_CHECK_BITS_ID_LOOKUP_8:RW:8:4:=0x0f AXI1_RANGE_RID_CHECK_BITS_ID_LOOKUP_8:RW:0:4:=0x0f
+#define DENALI_CTL_269_DATA 0xffffffff // AXI1_RANGE_WID_CHECK_BITS_9:RW:16:16:=0xffff AXI1_RANGE_RID_CHECK_BITS_9:RW:0:16:=0xffff
+#define DENALI_CTL_270_DATA 0x00030f0f // AXI1_RANGE_PROT_BITS_10:RW:16:2:=0x03 AXI1_RANGE_WID_CHECK_BITS_ID_LOOKUP_9:RW:8:4:=0x0f AXI1_RANGE_RID_CHECK_BITS_ID_LOOKUP_9:RW:0:4:=0x0f
+#define DENALI_CTL_271_DATA 0xffffffff // AXI1_RANGE_WID_CHECK_BITS_10:RW:16:16:=0xffff AXI1_RANGE_RID_CHECK_BITS_10:RW:0:16:=0xffff
+#define DENALI_CTL_272_DATA 0x00030f0f // AXI1_RANGE_PROT_BITS_11:RW:16:2:=0x03 AXI1_RANGE_WID_CHECK_BITS_ID_LOOKUP_10:RW:8:4:=0x0f AXI1_RANGE_RID_CHECK_BITS_ID_LOOKUP_10:RW:0:4:=0x0f
+#define DENALI_CTL_273_DATA 0xffffffff // AXI1_RANGE_WID_CHECK_BITS_11:RW:16:16:=0xffff AXI1_RANGE_RID_CHECK_BITS_11:RW:0:16:=0xffff
+#define DENALI_CTL_274_DATA 0x00030f0f // AXI1_RANGE_PROT_BITS_12:RW:16:2:=0x03 AXI1_RANGE_WID_CHECK_BITS_ID_LOOKUP_11:RW:8:4:=0x0f AXI1_RANGE_RID_CHECK_BITS_ID_LOOKUP_11:RW:0:4:=0x0f
+#define DENALI_CTL_275_DATA 0xffffffff // AXI1_RANGE_WID_CHECK_BITS_12:RW:16:16:=0xffff AXI1_RANGE_RID_CHECK_BITS_12:RW:0:16:=0xffff
+#define DENALI_CTL_276_DATA 0x00030f0f // AXI1_RANGE_PROT_BITS_13:RW:16:2:=0x03 AXI1_RANGE_WID_CHECK_BITS_ID_LOOKUP_12:RW:8:4:=0x0f AXI1_RANGE_RID_CHECK_BITS_ID_LOOKUP_12:RW:0:4:=0x0f
+#define DENALI_CTL_277_DATA 0xffffffff // AXI1_RANGE_WID_CHECK_BITS_13:RW:16:16:=0xffff AXI1_RANGE_RID_CHECK_BITS_13:RW:0:16:=0xffff
+#define DENALI_CTL_278_DATA 0x00030f0f // AXI1_RANGE_PROT_BITS_14:RW:16:2:=0x03 AXI1_RANGE_WID_CHECK_BITS_ID_LOOKUP_13:RW:8:4:=0x0f AXI1_RANGE_RID_CHECK_BITS_ID_LOOKUP_13:RW:0:4:=0x0f
+#define DENALI_CTL_279_DATA 0xffffffff // AXI1_RANGE_WID_CHECK_BITS_14:RW:16:16:=0xffff AXI1_RANGE_RID_CHECK_BITS_14:RW:0:16:=0xffff
+#define DENALI_CTL_280_DATA 0x00030f0f // AXI1_RANGE_PROT_BITS_15:RW:16:2:=0x03 AXI1_RANGE_WID_CHECK_BITS_ID_LOOKUP_14:RW:8:4:=0x0f AXI1_RANGE_RID_CHECK_BITS_ID_LOOKUP_14:RW:0:4:=0x0f
+#define DENALI_CTL_281_DATA 0xffffffff // AXI1_RANGE_WID_CHECK_BITS_15:RW:16:16:=0xffff AXI1_RANGE_RID_CHECK_BITS_15:RW:0:16:=0xffff
+#define DENALI_CTL_282_DATA 0x00030f0f // AXI2_RANGE_PROT_BITS_0:RW:16:2:=0x03 AXI1_RANGE_WID_CHECK_BITS_ID_LOOKUP_15:RW:8:4:=0x0f AXI1_RANGE_RID_CHECK_BITS_ID_LOOKUP_15:RW:0:4:=0x0f
+#define DENALI_CTL_283_DATA 0xffffffff // AXI2_RANGE_WID_CHECK_BITS_0:RW:16:16:=0xffff AXI2_RANGE_RID_CHECK_BITS_0:RW:0:16:=0xffff
+#define DENALI_CTL_284_DATA 0x00030f0f // AXI2_RANGE_PROT_BITS_1:RW:16:2:=0x03 AXI2_RANGE_WID_CHECK_BITS_ID_LOOKUP_0:RW:8:4:=0x0f AXI2_RANGE_RID_CHECK_BITS_ID_LOOKUP_0:RW:0:4:=0x0f
+#define DENALI_CTL_285_DATA 0xffffffff // AXI2_RANGE_WID_CHECK_BITS_1:RW:16:16:=0xffff AXI2_RANGE_RID_CHECK_BITS_1:RW:0:16:=0xffff
+#define DENALI_CTL_286_DATA 0x00030f0f // AXI2_RANGE_PROT_BITS_2:RW:16:2:=0x03 AXI2_RANGE_WID_CHECK_BITS_ID_LOOKUP_1:RW:8:4:=0x0f AXI2_RANGE_RID_CHECK_BITS_ID_LOOKUP_1:RW:0:4:=0x0f
+#define DENALI_CTL_287_DATA 0xffffffff // AXI2_RANGE_WID_CHECK_BITS_2:RW:16:16:=0xffff AXI2_RANGE_RID_CHECK_BITS_2:RW:0:16:=0xffff
+#define DENALI_CTL_288_DATA 0x00030f0f // AXI2_RANGE_PROT_BITS_3:RW:16:2:=0x03 AXI2_RANGE_WID_CHECK_BITS_ID_LOOKUP_2:RW:8:4:=0x0f AXI2_RANGE_RID_CHECK_BITS_ID_LOOKUP_2:RW:0:4:=0x0f
+#define DENALI_CTL_289_DATA 0xffffffff // AXI2_RANGE_WID_CHECK_BITS_3:RW:16:16:=0xffff AXI2_RANGE_RID_CHECK_BITS_3:RW:0:16:=0xffff
+#define DENALI_CTL_290_DATA 0x00030f0f // AXI2_RANGE_PROT_BITS_4:RW:16:2:=0x03 AXI2_RANGE_WID_CHECK_BITS_ID_LOOKUP_3:RW:8:4:=0x0f AXI2_RANGE_RID_CHECK_BITS_ID_LOOKUP_3:RW:0:4:=0x0f
+#define DENALI_CTL_291_DATA 0xffffffff // AXI2_RANGE_WID_CHECK_BITS_4:RW:16:16:=0xffff AXI2_RANGE_RID_CHECK_BITS_4:RW:0:16:=0xffff
+#define DENALI_CTL_292_DATA 0x00030f0f // AXI2_RANGE_PROT_BITS_5:RW:16:2:=0x03 AXI2_RANGE_WID_CHECK_BITS_ID_LOOKUP_4:RW:8:4:=0x0f AXI2_RANGE_RID_CHECK_BITS_ID_LOOKUP_4:RW:0:4:=0x0f
+#define DENALI_CTL_293_DATA 0xffffffff // AXI2_RANGE_WID_CHECK_BITS_5:RW:16:16:=0xffff AXI2_RANGE_RID_CHECK_BITS_5:RW:0:16:=0xffff
+#define DENALI_CTL_294_DATA 0x00030f0f // AXI2_RANGE_PROT_BITS_6:RW:16:2:=0x03 AXI2_RANGE_WID_CHECK_BITS_ID_LOOKUP_5:RW:8:4:=0x0f AXI2_RANGE_RID_CHECK_BITS_ID_LOOKUP_5:RW:0:4:=0x0f
+#define DENALI_CTL_295_DATA 0xffffffff // AXI2_RANGE_WID_CHECK_BITS_6:RW:16:16:=0xffff AXI2_RANGE_RID_CHECK_BITS_6:RW:0:16:=0xffff
+#define DENALI_CTL_296_DATA 0x00030f0f // AXI2_RANGE_PROT_BITS_7:RW:16:2:=0x03 AXI2_RANGE_WID_CHECK_BITS_ID_LOOKUP_6:RW:8:4:=0x0f AXI2_RANGE_RID_CHECK_BITS_ID_LOOKUP_6:RW:0:4:=0x0f
+#define DENALI_CTL_297_DATA 0xffffffff // AXI2_RANGE_WID_CHECK_BITS_7:RW:16:16:=0xffff AXI2_RANGE_RID_CHECK_BITS_7:RW:0:16:=0xffff
+#define DENALI_CTL_298_DATA 0x00030f0f // AXI2_RANGE_PROT_BITS_8:RW:16:2:=0x03 AXI2_RANGE_WID_CHECK_BITS_ID_LOOKUP_7:RW:8:4:=0x0f AXI2_RANGE_RID_CHECK_BITS_ID_LOOKUP_7:RW:0:4:=0x0f
+#define DENALI_CTL_299_DATA 0xffffffff // AXI2_RANGE_WID_CHECK_BITS_8:RW:16:16:=0xffff AXI2_RANGE_RID_CHECK_BITS_8:RW:0:16:=0xffff
+#define DENALI_CTL_300_DATA 0x00030f0f // AXI2_RANGE_PROT_BITS_9:RW:16:2:=0x03 AXI2_RANGE_WID_CHECK_BITS_ID_LOOKUP_8:RW:8:4:=0x0f AXI2_RANGE_RID_CHECK_BITS_ID_LOOKUP_8:RW:0:4:=0x0f
+#define DENALI_CTL_301_DATA 0xffffffff // AXI2_RANGE_WID_CHECK_BITS_9:RW:16:16:=0xffff AXI2_RANGE_RID_CHECK_BITS_9:RW:0:16:=0xffff
+#define DENALI_CTL_302_DATA 0x00030f0f // AXI2_RANGE_PROT_BITS_10:RW:16:2:=0x03 AXI2_RANGE_WID_CHECK_BITS_ID_LOOKUP_9:RW:8:4:=0x0f AXI2_RANGE_RID_CHECK_BITS_ID_LOOKUP_9:RW:0:4:=0x0f
+#define DENALI_CTL_303_DATA 0xffffffff // AXI2_RANGE_WID_CHECK_BITS_10:RW:16:16:=0xffff AXI2_RANGE_RID_CHECK_BITS_10:RW:0:16:=0xffff
+#define DENALI_CTL_304_DATA 0x00030f0f // AXI2_RANGE_PROT_BITS_11:RW:16:2:=0x03 AXI2_RANGE_WID_CHECK_BITS_ID_LOOKUP_10:RW:8:4:=0x0f AXI2_RANGE_RID_CHECK_BITS_ID_LOOKUP_10:RW:0:4:=0x0f
+#define DENALI_CTL_305_DATA 0xffffffff // AXI2_RANGE_WID_CHECK_BITS_11:RW:16:16:=0xffff AXI2_RANGE_RID_CHECK_BITS_11:RW:0:16:=0xffff
+#define DENALI_CTL_306_DATA 0x00030f0f // AXI2_RANGE_PROT_BITS_12:RW:16:2:=0x03 AXI2_RANGE_WID_CHECK_BITS_ID_LOOKUP_11:RW:8:4:=0x0f AXI2_RANGE_RID_CHECK_BITS_ID_LOOKUP_11:RW:0:4:=0x0f
+#define DENALI_CTL_307_DATA 0xffffffff // AXI2_RANGE_WID_CHECK_BITS_12:RW:16:16:=0xffff AXI2_RANGE_RID_CHECK_BITS_12:RW:0:16:=0xffff
+#define DENALI_CTL_308_DATA 0x00030f0f // AXI2_RANGE_PROT_BITS_13:RW:16:2:=0x03 AXI2_RANGE_WID_CHECK_BITS_ID_LOOKUP_12:RW:8:4:=0x0f AXI2_RANGE_RID_CHECK_BITS_ID_LOOKUP_12:RW:0:4:=0x0f
+#define DENALI_CTL_309_DATA 0xffffffff // AXI2_RANGE_WID_CHECK_BITS_13:RW:16:16:=0xffff AXI2_RANGE_RID_CHECK_BITS_13:RW:0:16:=0xffff
+#define DENALI_CTL_310_DATA 0x00030f0f // AXI2_RANGE_PROT_BITS_14:RW:16:2:=0x03 AXI2_RANGE_WID_CHECK_BITS_ID_LOOKUP_13:RW:8:4:=0x0f AXI2_RANGE_RID_CHECK_BITS_ID_LOOKUP_13:RW:0:4:=0x0f
+#define DENALI_CTL_311_DATA 0xffffffff // AXI2_RANGE_WID_CHECK_BITS_14:RW:16:16:=0xffff AXI2_RANGE_RID_CHECK_BITS_14:RW:0:16:=0xffff
+#define DENALI_CTL_312_DATA 0x00030f0f // AXI2_RANGE_PROT_BITS_15:RW:16:2:=0x03 AXI2_RANGE_WID_CHECK_BITS_ID_LOOKUP_14:RW:8:4:=0x0f AXI2_RANGE_RID_CHECK_BITS_ID_LOOKUP_14:RW:0:4:=0x0f
+#define DENALI_CTL_313_DATA 0xffffffff // AXI2_RANGE_WID_CHECK_BITS_15:RW:16:16:=0xffff AXI2_RANGE_RID_CHECK_BITS_15:RW:0:16:=0xffff
+#define DENALI_CTL_314_DATA 0x00030f0f // AXI3_RANGE_PROT_BITS_0:RW:16:2:=0x03 AXI2_RANGE_WID_CHECK_BITS_ID_LOOKUP_15:RW:8:4:=0x0f AXI2_RANGE_RID_CHECK_BITS_ID_LOOKUP_15:RW:0:4:=0x0f
+#define DENALI_CTL_315_DATA 0xffffffff // AXI3_RANGE_WID_CHECK_BITS_0:RW:16:16:=0xffff AXI3_RANGE_RID_CHECK_BITS_0:RW:0:16:=0xffff
+#define DENALI_CTL_316_DATA 0x00030f0f // AXI3_RANGE_PROT_BITS_1:RW:16:2:=0x03 AXI3_RANGE_WID_CHECK_BITS_ID_LOOKUP_0:RW:8:4:=0x0f AXI3_RANGE_RID_CHECK_BITS_ID_LOOKUP_0:RW:0:4:=0x0f
+#define DENALI_CTL_317_DATA 0xffffffff // AXI3_RANGE_WID_CHECK_BITS_1:RW:16:16:=0xffff AXI3_RANGE_RID_CHECK_BITS_1:RW:0:16:=0xffff
+#define DENALI_CTL_318_DATA 0x00030f0f // AXI3_RANGE_PROT_BITS_2:RW:16:2:=0x03 AXI3_RANGE_WID_CHECK_BITS_ID_LOOKUP_1:RW:8:4:=0x0f AXI3_RANGE_RID_CHECK_BITS_ID_LOOKUP_1:RW:0:4:=0x0f
+#define DENALI_CTL_319_DATA 0xffffffff // AXI3_RANGE_WID_CHECK_BITS_2:RW:16:16:=0xffff AXI3_RANGE_RID_CHECK_BITS_2:RW:0:16:=0xffff
+#define DENALI_CTL_320_DATA 0x00030f0f // AXI3_RANGE_PROT_BITS_3:RW:16:2:=0x03 AXI3_RANGE_WID_CHECK_BITS_ID_LOOKUP_2:RW:8:4:=0x0f AXI3_RANGE_RID_CHECK_BITS_ID_LOOKUP_2:RW:0:4:=0x0f
+#define DENALI_CTL_321_DATA 0xffffffff // AXI3_RANGE_WID_CHECK_BITS_3:RW:16:16:=0xffff AXI3_RANGE_RID_CHECK_BITS_3:RW:0:16:=0xffff
+#define DENALI_CTL_322_DATA 0x00030f0f // AXI3_RANGE_PROT_BITS_4:RW:16:2:=0x03 AXI3_RANGE_WID_CHECK_BITS_ID_LOOKUP_3:RW:8:4:=0x0f AXI3_RANGE_RID_CHECK_BITS_ID_LOOKUP_3:RW:0:4:=0x0f
+#define DENALI_CTL_323_DATA 0xffffffff // AXI3_RANGE_WID_CHECK_BITS_4:RW:16:16:=0xffff AXI3_RANGE_RID_CHECK_BITS_4:RW:0:16:=0xffff
+#define DENALI_CTL_324_DATA 0x00030f0f // AXI3_RANGE_PROT_BITS_5:RW:16:2:=0x03 AXI3_RANGE_WID_CHECK_BITS_ID_LOOKUP_4:RW:8:4:=0x0f AXI3_RANGE_RID_CHECK_BITS_ID_LOOKUP_4:RW:0:4:=0x0f
+#define DENALI_CTL_325_DATA 0xffffffff // AXI3_RANGE_WID_CHECK_BITS_5:RW:16:16:=0xffff AXI3_RANGE_RID_CHECK_BITS_5:RW:0:16:=0xffff
+#define DENALI_CTL_326_DATA 0x00030f0f // AXI3_RANGE_PROT_BITS_6:RW:16:2:=0x03 AXI3_RANGE_WID_CHECK_BITS_ID_LOOKUP_5:RW:8:4:=0x0f AXI3_RANGE_RID_CHECK_BITS_ID_LOOKUP_5:RW:0:4:=0x0f
+#define DENALI_CTL_327_DATA 0xffffffff // AXI3_RANGE_WID_CHECK_BITS_6:RW:16:16:=0xffff AXI3_RANGE_RID_CHECK_BITS_6:RW:0:16:=0xffff
+#define DENALI_CTL_328_DATA 0x00030f0f // AXI3_RANGE_PROT_BITS_7:RW:16:2:=0x03 AXI3_RANGE_WID_CHECK_BITS_ID_LOOKUP_6:RW:8:4:=0x0f AXI3_RANGE_RID_CHECK_BITS_ID_LOOKUP_6:RW:0:4:=0x0f
+#define DENALI_CTL_329_DATA 0xffffffff // AXI3_RANGE_WID_CHECK_BITS_7:RW:16:16:=0xffff AXI3_RANGE_RID_CHECK_BITS_7:RW:0:16:=0xffff
+#define DENALI_CTL_330_DATA 0x00030f0f // AXI3_RANGE_PROT_BITS_8:RW:16:2:=0x03 AXI3_RANGE_WID_CHECK_BITS_ID_LOOKUP_7:RW:8:4:=0x0f AXI3_RANGE_RID_CHECK_BITS_ID_LOOKUP_7:RW:0:4:=0x0f
+#define DENALI_CTL_331_DATA 0xffffffff // AXI3_RANGE_WID_CHECK_BITS_8:RW:16:16:=0xffff AXI3_RANGE_RID_CHECK_BITS_8:RW:0:16:=0xffff
+#define DENALI_CTL_332_DATA 0x00030f0f // AXI3_RANGE_PROT_BITS_9:RW:16:2:=0x03 AXI3_RANGE_WID_CHECK_BITS_ID_LOOKUP_8:RW:8:4:=0x0f AXI3_RANGE_RID_CHECK_BITS_ID_LOOKUP_8:RW:0:4:=0x0f
+#define DENALI_CTL_333_DATA 0xffffffff // AXI3_RANGE_WID_CHECK_BITS_9:RW:16:16:=0xffff AXI3_RANGE_RID_CHECK_BITS_9:RW:0:16:=0xffff
+#define DENALI_CTL_334_DATA 0x00030f0f // AXI3_RANGE_PROT_BITS_10:RW:16:2:=0x03 AXI3_RANGE_WID_CHECK_BITS_ID_LOOKUP_9:RW:8:4:=0x0f AXI3_RANGE_RID_CHECK_BITS_ID_LOOKUP_9:RW:0:4:=0x0f
+#define DENALI_CTL_335_DATA 0xffffffff // AXI3_RANGE_WID_CHECK_BITS_10:RW:16:16:=0xffff AXI3_RANGE_RID_CHECK_BITS_10:RW:0:16:=0xffff
+#define DENALI_CTL_336_DATA 0x00030f0f // AXI3_RANGE_PROT_BITS_11:RW:16:2:=0x03 AXI3_RANGE_WID_CHECK_BITS_ID_LOOKUP_10:RW:8:4:=0x0f AXI3_RANGE_RID_CHECK_BITS_ID_LOOKUP_10:RW:0:4:=0x0f
+#define DENALI_CTL_337_DATA 0xffffffff // AXI3_RANGE_WID_CHECK_BITS_11:RW:16:16:=0xffff AXI3_RANGE_RID_CHECK_BITS_11:RW:0:16:=0xffff
+#define DENALI_CTL_338_DATA 0x00030f0f // AXI3_RANGE_PROT_BITS_12:RW:16:2:=0x03 AXI3_RANGE_WID_CHECK_BITS_ID_LOOKUP_11:RW:8:4:=0x0f AXI3_RANGE_RID_CHECK_BITS_ID_LOOKUP_11:RW:0:4:=0x0f
+#define DENALI_CTL_339_DATA 0xffffffff // AXI3_RANGE_WID_CHECK_BITS_12:RW:16:16:=0xffff AXI3_RANGE_RID_CHECK_BITS_12:RW:0:16:=0xffff
+#define DENALI_CTL_340_DATA 0x00030f0f // AXI3_RANGE_PROT_BITS_13:RW:16:2:=0x03 AXI3_RANGE_WID_CHECK_BITS_ID_LOOKUP_12:RW:8:4:=0x0f AXI3_RANGE_RID_CHECK_BITS_ID_LOOKUP_12:RW:0:4:=0x0f
+#define DENALI_CTL_341_DATA 0xffffffff // AXI3_RANGE_WID_CHECK_BITS_13:RW:16:16:=0xffff AXI3_RANGE_RID_CHECK_BITS_13:RW:0:16:=0xffff
+#define DENALI_CTL_342_DATA 0x00030f0f // AXI3_RANGE_PROT_BITS_14:RW:16:2:=0x03 AXI3_RANGE_WID_CHECK_BITS_ID_LOOKUP_13:RW:8:4:=0x0f AXI3_RANGE_RID_CHECK_BITS_ID_LOOKUP_13:RW:0:4:=0x0f
+#define DENALI_CTL_343_DATA 0xffffffff // AXI3_RANGE_WID_CHECK_BITS_14:RW:16:16:=0xffff AXI3_RANGE_RID_CHECK_BITS_14:RW:0:16:=0xffff
+#define DENALI_CTL_344_DATA 0x00030f0f // AXI3_RANGE_PROT_BITS_15:RW:16:2:=0x03 AXI3_RANGE_WID_CHECK_BITS_ID_LOOKUP_14:RW:8:4:=0x0f AXI3_RANGE_RID_CHECK_BITS_ID_LOOKUP_14:RW:0:4:=0x0f
+#define DENALI_CTL_345_DATA 0xffffffff // AXI3_RANGE_WID_CHECK_BITS_15:RW:16:16:=0xffff AXI3_RANGE_RID_CHECK_BITS_15:RW:0:16:=0xffff
+#define DENALI_CTL_346_DATA 0x32030f0f // AXI0_BDW:RW:24:7:=0x32 ARB_CMD_Q_THRESHOLD:RW:16:3:=0x03 AXI3_RANGE_WID_CHECK_BITS_ID_LOOKUP_15:RW:8:4:=0x0f AXI3_RANGE_RID_CHECK_BITS_ID_LOOKUP_15:RW:0:4:=0x0f
+#define DENALI_CTL_347_DATA 0x01320001 // AXI1_BDW_OVFLOW:RW:24:1:=0x01 AXI1_BDW:RW:16:7:=0x32 AXI0_CURRENT_BDW:RD:8:7:=0x00 AXI0_BDW_OVFLOW:RW:0:1:=0x01
+#define DENALI_CTL_348_DATA 0x00013200 // AXI2_CURRENT_BDW:RD:24:7:=0x00 AXI2_BDW_OVFLOW:RW:16:1:=0x01 AXI2_BDW:RW:8:7:=0x32 AXI1_CURRENT_BDW:RD:0:7:=0x00
+#define DENALI_CTL_349_DATA 0x00000132 // CKE_STATUS:RD:24:2:=0x00 AXI3_CURRENT_BDW:RD:16:7:=0x00 AXI3_BDW_OVFLOW:RW:8:1:=0x01 AXI3_BDW:RW:0:7:=0x32
+#define DENALI_CTL_350_DATA 0x00000000 // DLL_RST_ADJ_DLY:RW:24:8:=0x00 DLL_RST_DELAY:RW:8:16:=0x0000 MEM_RST_VALID:RD:0:1:=0x00
+#define DENALI_CTL_351_DATA 0x000d0000 // TDFI_RDDATA_EN:RD:24:6:=0x00 TDFI_PHY_RDLAT:RW_D:16:6:=0x0d UPDATE_ERROR_STATUS:RD:8:7:=0x00 TDFI_PHY_WRLAT:RD:0:6:=0x00
+#define DENALI_CTL_352_DATA 0x1e680000 // TDFI_CTRLUPD_MAX:RW:16:14:=0x1e68 TDFI_CTRLUPD_MIN:RD:8:4:=0x00 DRAM_CLK_DISABLE:RW:0:2:=0x00
+#define DENALI_CTL_353_DATA 0x02000200 // TDFI_PHYUPD_TYPE1:RW:16:16:=0x0200 TDFI_PHYUPD_TYPE0:RW:0:16:=0x0200
+#define DENALI_CTL_354_DATA 0x02000200 // TDFI_PHYUPD_TYPE3:RW:16:16:=0x0200 TDFI_PHYUPD_TYPE2:RW:0:16:=0x0200
+#define DENALI_CTL_355_DATA 0x00001e68 // TDFI_PHYUPD_RESP:RW:0:14:=0x1e68
+#define DENALI_CTL_356_DATA 0x00009808 // TDFI_CTRLUPD_INTERVAL:RW:0:32:=0x00009808
+#define DENALI_CTL_357_DATA 0x00020608 // TDFI_DRAM_CLK_DISABLE:RW:24:4:=0x00 TDFI_CTRL_DELAY:RW_D:16:4:=0x02 WRLAT_ADJ:RW:8:6:=0x06 RDLAT_ADJ:RW:0:6:=0x08
+#define DENALI_CTL_358_DATA 0x000a0a01 // TDFI_WRLVL_WW:RW:16:10:=0x000a TDFI_WRLVL_EN:RW:8:8:=0x0a TDFI_DRAM_CLK_ENABLE:RW:0:4:=0x01
+#define DENALI_CTL_359_DATA 0x00000000 // TDFI_WRLVL_RESP:RW:0:32:=0x00000000
+#define DENALI_CTL_360_DATA 0x00000000 // TDFI_WRLVL_MAX:RW:0:32:=0x00000000
+#define DENALI_CTL_361_DATA 0x04038000 // TDFI_WRLVL_RESPLAT:RW:24:8:=0x04 TDFI_WRLVL_DLL:RW:16:8:=0x03 DFI_WRLVL_MAX_DELAY:RW:0:16:=0x8000
+#define DENALI_CTL_362_DATA 0x07030a07 // TDFI_RDLVL_LOAD:RW:24:8:=0x07 TDFI_RDLVL_DLL:RW:16:8:=0x03 TDFI_RDLVL_EN:RW:8:8:=0x0a TDFI_WRLVL_LOAD:RW:0:8:=0x07
+#define DENALI_CTL_363_DATA 0x00ffff22 // RDLVL_MAX_DELAY:RW:8:16:=0xffff TDFI_RDLVL_RESPLAT:RW:0:8:=0x22
+#define DENALI_CTL_364_DATA 0x000f0010 // TDFI_RDLVL_RR:RW:16:10:=0x000f RDLVL_GATE_MAX_DELAY:RW:0:16:=0x0010
+#define DENALI_CTL_365_DATA 0x00000000 // TDFI_RDLVL_RESP:RW:0:32:=0x00000000
+#define DENALI_CTL_366_DATA 0x00000000 // RDLVL_RESP_MASK:RW:0:20:=0x000000
+#define DENALI_CTL_367_DATA 0x00000000 // RDLVL_EN:RW:24:1:=0x00 RDLVL_GATE_RESP_MASK:RW:0:20:=0x000000
+#define DENALI_CTL_368_DATA 0x00000000 // RDLVL_GATE_PREAMBLE_CHECK_EN:RW:8:1:=0x00 RDLVL_GATE_EN:RW:0:1:=0x00
+#define DENALI_CTL_369_DATA 0x00000000 // TDFI_RDLVL_MAX:RW:0:32:=0x00000000
+#define DENALI_CTL_370_DATA 0x00000204 // RDLVL_ERROR_STATUS:RD:16:14:=0x0000 RDLVL_GATE_DQ_ZERO_COUNT:RW:8:4:=0x02 RDLVL_DQ_ZERO_COUNT:RW:0:4:=0x04
+#define DENALI_CTL_371_DATA 0x00000000 // RDLVL_GATE_INTERVAL:RW:16:16:=0x0000 RDLVL_INTERVAL:RW:0:16:=0x0000
+#define DENALI_CTL_372_DATA 0x01000001 // OPTIMAL_RMODW_EN:RW:24:1:=0x01 MEMCD_RMODW_FIFO_PTR_WIDTH:RD:16:8:=0x00 MEMCD_RMODW_FIFO_DEPTH:RD:8:8:=0x00 TDFI_PHY_WRDATA:RW:0:3:=0x01
+#define DENALI_CTL_373_DATA 0x00000001 // RESERVED:RW:24:1:=0x00 RESERVED:RW:16:5:=0x00 RESERVED:RW:8:1:=0x00 RESERVED:RW:0:1:=0x01
+#define DENALI_CTL_374_DATA 0x00000000 // AXI3_ALL_STROBES_USED_ENABLE:RW:24:1:=0x00 AXI2_ALL_STROBES_USED_ENABLE:RW:16:1:=0x00 AXI1_ALL_STROBES_USED_ENABLE:RW:8:1:=0x00 AXI0_ALL_STROBES_USED_ENABLE:RW:0:1:=0x00
+
diff --git a/include/renesas/jedec_ddr3_2g_x16_1333h_500_cl8.h b/include/renesas/jedec_ddr3_2g_x16_1333h_500_cl8.h
new file mode 100644
index 0000000000..cfef7fa0bf
--- /dev/null
+++ b/include/renesas/jedec_ddr3_2g_x16_1333h_500_cl8.h
@@ -0,0 +1,399 @@
+
+/* ****************************************************************
+ * CADENCE Copyright (c) 2001-2011 *
+ * Cadence Design Systems, Inc. *
+ * All rights reserved. *
+ * *
+ ******************************************************************
+ * The values calculated from this script are meant to be *
+ * representative programmings. The values may not reflect the *
+ * actual required programming for production use. Please *
+ * closely review all programmed values for technical accuracy *
+ * before use in production parts. *
+ ******************************************************************
+ *
+ * Module: regconfig.h
+ * Documentation: Register programming header file
+ *
+ ******************************************************************
+ ******************************************************************
+ * WARNING: This file was automatically generated. Manual
+ * editing may result in undetermined behavior.
+ ******************************************************************
+ ******************************************************************/
+
+#define DENALI_CTL_00_DATA 0x00000600
+#define DENALI_CTL_01_DATA 0x00000000
+#define DENALI_CTL_02_DATA 0x00000000
+#define DENALI_CTL_03_DATA 0x00000000
+#define DENALI_CTL_04_DATA 0x00000000
+#define DENALI_CTL_05_DATA 0x00000000
+#define DENALI_CTL_06_DATA 0x00000000
+#define DENALI_CTL_07_DATA 0x00000005
+#define DENALI_CTL_08_DATA 0x000186a0
+#define DENALI_CTL_09_DATA 0x0003d090
+#define DENALI_CTL_10_DATA 0x00000000
+#define DENALI_CTL_11_DATA 0x10000200
+#define DENALI_CTL_12_DATA 0x04040006
+#define DENALI_CTL_13_DATA 0x04121904
+#define DENALI_CTL_14_DATA 0x04041707
+#define DENALI_CTL_15_DATA 0x00891c0c
+#define DENALI_CTL_16_DATA 0x07000503
+#define DENALI_CTL_17_DATA 0x01010008
+#define DENALI_CTL_18_DATA 0x0007030f
+#define DENALI_CTL_19_DATA 0x01000000
+#define DENALI_CTL_20_DATA 0x0f340050
+#define DENALI_CTL_21_DATA 0x00000005
+#define DENALI_CTL_22_DATA 0x000c0003
+#define DENALI_CTL_23_DATA 0x00000000
+#define DENALI_CTL_24_DATA 0x00550200
+#define DENALI_CTL_25_DATA 0x00010000
+#define DENALI_CTL_26_DATA 0x00050500
+#define DENALI_CTL_27_DATA 0x00000000
+#define DENALI_CTL_28_DATA 0x00000000
+#define DENALI_CTL_29_DATA 0x00000000
+#define DENALI_CTL_30_DATA 0x00000000
+#define DENALI_CTL_31_DATA 0x00084000
+#define DENALI_CTL_32_DATA 0x00080046
+#define DENALI_CTL_33_DATA 0x00000000
+#define DENALI_CTL_34_DATA 0x00460840
+#define DENALI_CTL_35_DATA 0x00000008
+#define DENALI_CTL_36_DATA 0x00010000
+#define DENALI_CTL_37_DATA 0x00000000
+#define DENALI_CTL_38_DATA 0x00000000
+#define DENALI_CTL_39_DATA 0x00000000
+#define DENALI_CTL_40_DATA 0x00000000
+#define DENALI_CTL_41_DATA 0x00000000
+#define DENALI_CTL_42_DATA 0x00000000
+#define DENALI_CTL_43_DATA 0x00000000
+#define DENALI_CTL_44_DATA 0x00000000
+#define DENALI_CTL_45_DATA 0x01000200
+#define DENALI_CTL_46_DATA 0x02000040
+#define DENALI_CTL_47_DATA 0x00000040
+#define DENALI_CTL_48_DATA 0x02000100
+#define DENALI_CTL_49_DATA 0xffff0a01
+#define DENALI_CTL_50_DATA 0x01010101
+#define DENALI_CTL_51_DATA 0x01010101
+#define DENALI_CTL_52_DATA 0x01030101
+#define DENALI_CTL_53_DATA 0x0c030000
+#define DENALI_CTL_54_DATA 0x00000000
+#define DENALI_CTL_55_DATA 0x00000100
+#define DENALI_CTL_56_DATA 0x00000000
+#define DENALI_CTL_57_DATA 0x00000000
+#define DENALI_CTL_58_DATA 0x00000000
+#define DENALI_CTL_59_DATA 0x00000000
+#define DENALI_CTL_60_DATA 0x00000000
+#define DENALI_CTL_61_DATA 0x00000000
+#define DENALI_CTL_62_DATA 0x01020000
+#define DENALI_CTL_63_DATA 0x06050201
+#define DENALI_CTL_64_DATA 0x02000106
+#define DENALI_CTL_65_DATA 0x00000000
+#define DENALI_CTL_66_DATA 0x02020202
+#define DENALI_CTL_67_DATA 0x00000200
+#define DENALI_CTL_68_DATA 0x00000000
+#define DENALI_CTL_69_DATA 0x00000000
+#define DENALI_CTL_70_DATA 0x00000000
+#define DENALI_CTL_71_DATA 0x00280d00
+#define DENALI_CTL_72_DATA 0x00000000
+#define DENALI_CTL_73_DATA 0x00000100
+#define DENALI_CTL_74_DATA 0x00010001
+#define DENALI_CTL_75_DATA 0x00000000
+#define DENALI_CTL_76_DATA 0x00000000
+#define DENALI_CTL_77_DATA 0x00000000
+#define DENALI_CTL_78_DATA 0x00000000
+#define DENALI_CTL_79_DATA 0x00222200
+#define DENALI_CTL_80_DATA 0x00000001
+#define DENALI_CTL_81_DATA 0x00000000
+#define DENALI_CTL_82_DATA 0x00000000
+#define DENALI_CTL_83_DATA 0x00012222
+#define DENALI_CTL_84_DATA 0x00000000
+#define DENALI_CTL_85_DATA 0x00000000
+#define DENALI_CTL_86_DATA 0x00222200
+#define DENALI_CTL_87_DATA 0x02020001
+#define DENALI_CTL_88_DATA 0x00020200
+#define DENALI_CTL_89_DATA 0x02000202
+#define DENALI_CTL_90_DATA 0x01000002
+#define DENALI_CTL_91_DATA 0x00000000
+#define DENALI_CTL_92_DATA 0x0003ffff
+#define DENALI_CTL_93_DATA 0x00000000
+#define DENALI_CTL_94_DATA 0x0003ffff
+#define DENALI_CTL_95_DATA 0x00000000
+#define DENALI_CTL_96_DATA 0x0003ffff
+#define DENALI_CTL_97_DATA 0x00000000
+#define DENALI_CTL_98_DATA 0x0003ffff
+#define DENALI_CTL_99_DATA 0x00000000
+#define DENALI_CTL_100_DATA 0x0003ffff
+#define DENALI_CTL_101_DATA 0x00000000
+#define DENALI_CTL_102_DATA 0x0003ffff
+#define DENALI_CTL_103_DATA 0x00000000
+#define DENALI_CTL_104_DATA 0x0003ffff
+#define DENALI_CTL_105_DATA 0x00000000
+#define DENALI_CTL_106_DATA 0x0003ffff
+#define DENALI_CTL_107_DATA 0x00000000
+#define DENALI_CTL_108_DATA 0x0003ffff
+#define DENALI_CTL_109_DATA 0x00000000
+#define DENALI_CTL_110_DATA 0x0003ffff
+#define DENALI_CTL_111_DATA 0x00000000
+#define DENALI_CTL_112_DATA 0x0003ffff
+#define DENALI_CTL_113_DATA 0x00000000
+#define DENALI_CTL_114_DATA 0x0003ffff
+#define DENALI_CTL_115_DATA 0x00000000
+#define DENALI_CTL_116_DATA 0x0003ffff
+#define DENALI_CTL_117_DATA 0x00000000
+#define DENALI_CTL_118_DATA 0x0003ffff
+#define DENALI_CTL_119_DATA 0x00000000
+#define DENALI_CTL_120_DATA 0x0003ffff
+#define DENALI_CTL_121_DATA 0x00000000
+#define DENALI_CTL_122_DATA 0x0003ffff
+#define DENALI_CTL_123_DATA 0x00000000
+#define DENALI_CTL_124_DATA 0x0003ffff
+#define DENALI_CTL_125_DATA 0x00000000
+#define DENALI_CTL_126_DATA 0x0003ffff
+#define DENALI_CTL_127_DATA 0x00000000
+#define DENALI_CTL_128_DATA 0x0003ffff
+#define DENALI_CTL_129_DATA 0x00000000
+#define DENALI_CTL_130_DATA 0x0003ffff
+#define DENALI_CTL_131_DATA 0x00000000
+#define DENALI_CTL_132_DATA 0x0003ffff
+#define DENALI_CTL_133_DATA 0x00000000
+#define DENALI_CTL_134_DATA 0x0003ffff
+#define DENALI_CTL_135_DATA 0x00000000
+#define DENALI_CTL_136_DATA 0x0003ffff
+#define DENALI_CTL_137_DATA 0x00000000
+#define DENALI_CTL_138_DATA 0x0003ffff
+#define DENALI_CTL_139_DATA 0x00000000
+#define DENALI_CTL_140_DATA 0x0003ffff
+#define DENALI_CTL_141_DATA 0x00000000
+#define DENALI_CTL_142_DATA 0x0003ffff
+#define DENALI_CTL_143_DATA 0x00000000
+#define DENALI_CTL_144_DATA 0x0003ffff
+#define DENALI_CTL_145_DATA 0x00000000
+#define DENALI_CTL_146_DATA 0x0003ffff
+#define DENALI_CTL_147_DATA 0x00000000
+#define DENALI_CTL_148_DATA 0x0003ffff
+#define DENALI_CTL_149_DATA 0x00000000
+#define DENALI_CTL_150_DATA 0x0003ffff
+#define DENALI_CTL_151_DATA 0x00000000
+#define DENALI_CTL_152_DATA 0x0003ffff
+#define DENALI_CTL_153_DATA 0x00000000
+#define DENALI_CTL_154_DATA 0x0003ffff
+#define DENALI_CTL_155_DATA 0x00000000
+#define DENALI_CTL_156_DATA 0x0003ffff
+#define DENALI_CTL_157_DATA 0x00000000
+#define DENALI_CTL_158_DATA 0x0003ffff
+#define DENALI_CTL_159_DATA 0x00000000
+#define DENALI_CTL_160_DATA 0x0003ffff
+#define DENALI_CTL_161_DATA 0x00000000
+#define DENALI_CTL_162_DATA 0x0003ffff
+#define DENALI_CTL_163_DATA 0x00000000
+#define DENALI_CTL_164_DATA 0x0003ffff
+#define DENALI_CTL_165_DATA 0x00000000
+#define DENALI_CTL_166_DATA 0x0003ffff
+#define DENALI_CTL_167_DATA 0x00000000
+#define DENALI_CTL_168_DATA 0x0003ffff
+#define DENALI_CTL_169_DATA 0x00000000
+#define DENALI_CTL_170_DATA 0x0003ffff
+#define DENALI_CTL_171_DATA 0x00000000
+#define DENALI_CTL_172_DATA 0x0003ffff
+#define DENALI_CTL_173_DATA 0x00000000
+#define DENALI_CTL_174_DATA 0x0003ffff
+#define DENALI_CTL_175_DATA 0x00000000
+#define DENALI_CTL_176_DATA 0x0003ffff
+#define DENALI_CTL_177_DATA 0x00000000
+#define DENALI_CTL_178_DATA 0x0003ffff
+#define DENALI_CTL_179_DATA 0x00000000
+#define DENALI_CTL_180_DATA 0x0003ffff
+#define DENALI_CTL_181_DATA 0x00000000
+#define DENALI_CTL_182_DATA 0x0003ffff
+#define DENALI_CTL_183_DATA 0x00000000
+#define DENALI_CTL_184_DATA 0x0003ffff
+#define DENALI_CTL_185_DATA 0x00000000
+#define DENALI_CTL_186_DATA 0x0003ffff
+#define DENALI_CTL_187_DATA 0x00000000
+#define DENALI_CTL_188_DATA 0x0003ffff
+#define DENALI_CTL_189_DATA 0x00000000
+#define DENALI_CTL_190_DATA 0x0003ffff
+#define DENALI_CTL_191_DATA 0x00000000
+#define DENALI_CTL_192_DATA 0x0003ffff
+#define DENALI_CTL_193_DATA 0x00000000
+#define DENALI_CTL_194_DATA 0x0003ffff
+#define DENALI_CTL_195_DATA 0x00000000
+#define DENALI_CTL_196_DATA 0x0003ffff
+#define DENALI_CTL_197_DATA 0x00000000
+#define DENALI_CTL_198_DATA 0x0003ffff
+#define DENALI_CTL_199_DATA 0x00000000
+#define DENALI_CTL_200_DATA 0x0003ffff
+#define DENALI_CTL_201_DATA 0x00000000
+#define DENALI_CTL_202_DATA 0x0003ffff
+#define DENALI_CTL_203_DATA 0x00000000
+#define DENALI_CTL_204_DATA 0x0003ffff
+#define DENALI_CTL_205_DATA 0x00000000
+#define DENALI_CTL_206_DATA 0x0003ffff
+#define DENALI_CTL_207_DATA 0x00000000
+#define DENALI_CTL_208_DATA 0x0003ffff
+#define DENALI_CTL_209_DATA 0x00000000
+#define DENALI_CTL_210_DATA 0x0003ffff
+#define DENALI_CTL_211_DATA 0x00000000
+#define DENALI_CTL_212_DATA 0x0003ffff
+#define DENALI_CTL_213_DATA 0x00000000
+#define DENALI_CTL_214_DATA 0x0003ffff
+#define DENALI_CTL_215_DATA 0x00000000
+#define DENALI_CTL_216_DATA 0x0003ffff
+#define DENALI_CTL_217_DATA 0x00000000
+#define DENALI_CTL_218_DATA 0x0303ffff
+#define DENALI_CTL_219_DATA 0xffffffff
+#define DENALI_CTL_220_DATA 0x00030f0f
+#define DENALI_CTL_221_DATA 0xffffffff
+#define DENALI_CTL_222_DATA 0x00030f0f
+#define DENALI_CTL_223_DATA 0xffffffff
+#define DENALI_CTL_224_DATA 0x00030f0f
+#define DENALI_CTL_225_DATA 0xffffffff
+#define DENALI_CTL_226_DATA 0x00030f0f
+#define DENALI_CTL_227_DATA 0xffffffff
+#define DENALI_CTL_228_DATA 0x00030f0f
+#define DENALI_CTL_229_DATA 0xffffffff
+#define DENALI_CTL_230_DATA 0x00030f0f
+#define DENALI_CTL_231_DATA 0xffffffff
+#define DENALI_CTL_232_DATA 0x00030f0f
+#define DENALI_CTL_233_DATA 0xffffffff
+#define DENALI_CTL_234_DATA 0x00030f0f
+#define DENALI_CTL_235_DATA 0xffffffff
+#define DENALI_CTL_236_DATA 0x00030f0f
+#define DENALI_CTL_237_DATA 0xffffffff
+#define DENALI_CTL_238_DATA 0x00030f0f
+#define DENALI_CTL_239_DATA 0xffffffff
+#define DENALI_CTL_240_DATA 0x00030f0f
+#define DENALI_CTL_241_DATA 0xffffffff
+#define DENALI_CTL_242_DATA 0x00030f0f
+#define DENALI_CTL_243_DATA 0xffffffff
+#define DENALI_CTL_244_DATA 0x00030f0f
+#define DENALI_CTL_245_DATA 0xffffffff
+#define DENALI_CTL_246_DATA 0x00030f0f
+#define DENALI_CTL_247_DATA 0xffffffff
+#define DENALI_CTL_248_DATA 0x00030f0f
+#define DENALI_CTL_249_DATA 0xffffffff
+#define DENALI_CTL_250_DATA 0x00030f0f
+#define DENALI_CTL_251_DATA 0xffffffff
+#define DENALI_CTL_252_DATA 0x00030f0f
+#define DENALI_CTL_253_DATA 0xffffffff
+#define DENALI_CTL_254_DATA 0x00030f0f
+#define DENALI_CTL_255_DATA 0xffffffff
+#define DENALI_CTL_256_DATA 0x00030f0f
+#define DENALI_CTL_257_DATA 0xffffffff
+#define DENALI_CTL_258_DATA 0x00030f0f
+#define DENALI_CTL_259_DATA 0xffffffff
+#define DENALI_CTL_260_DATA 0x00030f0f
+#define DENALI_CTL_261_DATA 0xffffffff
+#define DENALI_CTL_262_DATA 0x00030f0f
+#define DENALI_CTL_263_DATA 0xffffffff
+#define DENALI_CTL_264_DATA 0x00030f0f
+#define DENALI_CTL_265_DATA 0xffffffff
+#define DENALI_CTL_266_DATA 0x00030f0f
+#define DENALI_CTL_267_DATA 0xffffffff
+#define DENALI_CTL_268_DATA 0x00030f0f
+#define DENALI_CTL_269_DATA 0xffffffff
+#define DENALI_CTL_270_DATA 0x00030f0f
+#define DENALI_CTL_271_DATA 0xffffffff
+#define DENALI_CTL_272_DATA 0x00030f0f
+#define DENALI_CTL_273_DATA 0xffffffff
+#define DENALI_CTL_274_DATA 0x00030f0f
+#define DENALI_CTL_275_DATA 0xffffffff
+#define DENALI_CTL_276_DATA 0x00030f0f
+#define DENALI_CTL_277_DATA 0xffffffff
+#define DENALI_CTL_278_DATA 0x00030f0f
+#define DENALI_CTL_279_DATA 0xffffffff
+#define DENALI_CTL_280_DATA 0x00030f0f
+#define DENALI_CTL_281_DATA 0xffffffff
+#define DENALI_CTL_282_DATA 0x00030f0f
+#define DENALI_CTL_283_DATA 0xffffffff
+#define DENALI_CTL_284_DATA 0x00030f0f
+#define DENALI_CTL_285_DATA 0xffffffff
+#define DENALI_CTL_286_DATA 0x00030f0f
+#define DENALI_CTL_287_DATA 0xffffffff
+#define DENALI_CTL_288_DATA 0x00030f0f
+#define DENALI_CTL_289_DATA 0xffffffff
+#define DENALI_CTL_290_DATA 0x00030f0f
+#define DENALI_CTL_291_DATA 0xffffffff
+#define DENALI_CTL_292_DATA 0x00030f0f
+#define DENALI_CTL_293_DATA 0xffffffff
+#define DENALI_CTL_294_DATA 0x00030f0f
+#define DENALI_CTL_295_DATA 0xffffffff
+#define DENALI_CTL_296_DATA 0x00030f0f
+#define DENALI_CTL_297_DATA 0xffffffff
+#define DENALI_CTL_298_DATA 0x00030f0f
+#define DENALI_CTL_299_DATA 0xffffffff
+#define DENALI_CTL_300_DATA 0x00030f0f
+#define DENALI_CTL_301_DATA 0xffffffff
+#define DENALI_CTL_302_DATA 0x00030f0f
+#define DENALI_CTL_303_DATA 0xffffffff
+#define DENALI_CTL_304_DATA 0x00030f0f
+#define DENALI_CTL_305_DATA 0xffffffff
+#define DENALI_CTL_306_DATA 0x00030f0f
+#define DENALI_CTL_307_DATA 0xffffffff
+#define DENALI_CTL_308_DATA 0x00030f0f
+#define DENALI_CTL_309_DATA 0xffffffff
+#define DENALI_CTL_310_DATA 0x00030f0f
+#define DENALI_CTL_311_DATA 0xffffffff
+#define DENALI_CTL_312_DATA 0x00030f0f
+#define DENALI_CTL_313_DATA 0xffffffff
+#define DENALI_CTL_314_DATA 0x00030f0f
+#define DENALI_CTL_315_DATA 0xffffffff
+#define DENALI_CTL_316_DATA 0x00030f0f
+#define DENALI_CTL_317_DATA 0xffffffff
+#define DENALI_CTL_318_DATA 0x00030f0f
+#define DENALI_CTL_319_DATA 0xffffffff
+#define DENALI_CTL_320_DATA 0x00030f0f
+#define DENALI_CTL_321_DATA 0xffffffff
+#define DENALI_CTL_322_DATA 0x00030f0f
+#define DENALI_CTL_323_DATA 0xffffffff
+#define DENALI_CTL_324_DATA 0x00030f0f
+#define DENALI_CTL_325_DATA 0xffffffff
+#define DENALI_CTL_326_DATA 0x00030f0f
+#define DENALI_CTL_327_DATA 0xffffffff
+#define DENALI_CTL_328_DATA 0x00030f0f
+#define DENALI_CTL_329_DATA 0xffffffff
+#define DENALI_CTL_330_DATA 0x00030f0f
+#define DENALI_CTL_331_DATA 0xffffffff
+#define DENALI_CTL_332_DATA 0x00030f0f
+#define DENALI_CTL_333_DATA 0xffffffff
+#define DENALI_CTL_334_DATA 0x00030f0f
+#define DENALI_CTL_335_DATA 0xffffffff
+#define DENALI_CTL_336_DATA 0x00030f0f
+#define DENALI_CTL_337_DATA 0xffffffff
+#define DENALI_CTL_338_DATA 0x00030f0f
+#define DENALI_CTL_339_DATA 0xffffffff
+#define DENALI_CTL_340_DATA 0x00030f0f
+#define DENALI_CTL_341_DATA 0xffffffff
+#define DENALI_CTL_342_DATA 0x00030f0f
+#define DENALI_CTL_343_DATA 0xffffffff
+#define DENALI_CTL_344_DATA 0x00030f0f
+#define DENALI_CTL_345_DATA 0xffffffff
+#define DENALI_CTL_346_DATA 0x32030f0f
+#define DENALI_CTL_347_DATA 0x01320001
+#define DENALI_CTL_348_DATA 0x00013200
+#define DENALI_CTL_349_DATA 0x00000132
+#define DENALI_CTL_350_DATA 0x00000000
+#define DENALI_CTL_351_DATA 0x000d0000
+#define DENALI_CTL_352_DATA 0x1e680000
+#define DENALI_CTL_353_DATA 0x02000200
+#define DENALI_CTL_354_DATA 0x02000200
+#define DENALI_CTL_355_DATA 0x00001e68
+#define DENALI_CTL_356_DATA 0x00009808
+#define DENALI_CTL_357_DATA 0x00020608
+#define DENALI_CTL_358_DATA 0x000a0a01
+#define DENALI_CTL_359_DATA 0x00000000
+#define DENALI_CTL_360_DATA 0x00000000
+#define DENALI_CTL_361_DATA 0x04038000
+#define DENALI_CTL_362_DATA 0x07030a07
+#define DENALI_CTL_363_DATA 0x00ffff22
+#define DENALI_CTL_364_DATA 0x000f0010
+#define DENALI_CTL_365_DATA 0x00000000
+#define DENALI_CTL_366_DATA 0x00000000
+#define DENALI_CTL_367_DATA 0x00000000
+#define DENALI_CTL_368_DATA 0x00000000
+#define DENALI_CTL_369_DATA 0x00000000
+#define DENALI_CTL_370_DATA 0x00000204
+#define DENALI_CTL_371_DATA 0x00000000
+#define DENALI_CTL_372_DATA 0x01000001
+#define DENALI_CTL_373_DATA 0x00000001
+#define DENALI_CTL_374_DATA 0x00000000
--
2.25.1
More information about the U-Boot
mailing list