[tiU23.04 PATCH 2/4] configs: keep the bootcmd consistent across jacinto

[Manorit Chawdhry]

Since moving towards distroboot, we need a way to boot using the legacy
methods too so keep the bootcmd consistent across devices to keep both
the flows running.

Signed-off-by: Manorit Chawdhry <m-chawdhry at ti.com>
---
 configs/j7200_evm_a72_defconfig  | 2 +-
 configs/j721e_evm_a72_defconfig  | 2 +-
 configs/j721s2_evm_a72_defconfig | 2 +-
 configs/j784s4_evm_a72_defconfig | 2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/configs/j7200_evm_a72_defconfig b/configs/j7200_evm_a72_defconfig
index 19670b0da3c1..3982e6a8b53e 100644
--- a/configs/j7200_evm_a72_defconfig
+++ b/configs/j7200_evm_a72_defconfig
@@ -33,7 +33,7 @@ CONFIG_SPL_LOAD_FIT=y
 CONFIG_SPL_LOAD_FIT_ADDRESS=0x81000000
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_DISTRO_DEFAULTS=y
-CONFIG_BOOTCOMMAND="run findfdt; run envboot; run init_${boot}; run boot_rprocs; if test ${boot_fit} -eq 1; then run get_fit_${boot}; run get_overlaystring; run run_fit; else; run get_kern_${boot}; run get_fdt_${boot}; run get_overlay_${boot}; run run_kern; fi;"
+CONFIG_BOOTCOMMAND="run findfdt; run envboot; run init_${boot}; run boot_rprocs; if test ${boot_fit} -eq 1; then run get_fit_${boot}; run get_overlaystring; run run_fit; else; run get_kern_${boot}; run get_fdt_${boot}; run get_overlay_${boot}; run run_kern; fi; run distro_bootcmd"
 CONFIG_LOGLEVEL=7
 CONFIG_SPL_MAX_SIZE=0xc0000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
diff --git a/configs/j721e_evm_a72_defconfig b/configs/j721e_evm_a72_defconfig
index 1b0358a642c2..32dc4366fa84 100644
--- a/configs/j721e_evm_a72_defconfig
+++ b/configs/j721e_evm_a72_defconfig
@@ -31,7 +31,7 @@ CONFIG_SPL_LOAD_FIT=y
 CONFIG_SPL_LOAD_FIT_ADDRESS=0x81000000
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_DISTRO_DEFAULTS=y
-CONFIG_BOOTCOMMAND="run findfdt; run distro_bootcmd; run init_${boot}; run main_cpsw0_qsgmii_phyinit; run boot_rprocs; if test ${boot_fit} -eq 1; then run get_fit_${boot}; run get_overlaystring; run run_fit; else; run get_kern_${boot}; run get_fdt_${boot}; run get_overlay_${boot}; run run_kern; fi;"
+CONFIG_BOOTCOMMAND="run findfdt; run envboot; run init_${boot}; run main_cpsw0_qsgmii_phyinit; run boot_rprocs; if test ${boot_fit} -eq 1; then run get_fit_${boot}; run get_overlaystring; run run_fit; else; run get_kern_${boot}; run get_fdt_${boot}; run get_overlay_${boot}; run run_kern; fi; run distro_bootcmd"
 CONFIG_LOGLEVEL=7
 CONFIG_SPL_MAX_SIZE=0xc0000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
diff --git a/configs/j721s2_evm_a72_defconfig b/configs/j721s2_evm_a72_defconfig
index 884e2f5fe38b..75b1ce761c94 100644
--- a/configs/j721s2_evm_a72_defconfig
+++ b/configs/j721s2_evm_a72_defconfig
@@ -31,7 +31,7 @@ CONFIG_SPL_LOAD_FIT=y
 CONFIG_SPL_LOAD_FIT_ADDRESS=0x81000000
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_DISTRO_DEFAULTS=y
-CONFIG_BOOTCOMMAND="run findfdt; run envboot; run init_${boot}; run boot_rprocs; if test ${boot_fit} -eq 1; then run get_fit_${boot}; run get_overlaystring; run run_fit; else; run get_kern_${boot}; run get_fdt_${boot}; run get_overlay_${boot}; run run_kern; fi;"
+CONFIG_BOOTCOMMAND="run findfdt; run envboot; run init_${boot}; run boot_rprocs; if test ${boot_fit} -eq 1; then run get_fit_${boot}; run get_overlaystring; run run_fit; else; run get_kern_${boot}; run get_fdt_${boot}; run get_overlay_${boot}; run run_kern; fi; run distro_bootcmd"
 CONFIG_LOGLEVEL=7
 CONFIG_SPL_MAX_SIZE=0xc0000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
diff --git a/configs/j784s4_evm_a72_defconfig b/configs/j784s4_evm_a72_defconfig
index 9c4bda4fac43..fd61c9f43123 100644
--- a/configs/j784s4_evm_a72_defconfig
+++ b/configs/j784s4_evm_a72_defconfig
@@ -34,7 +34,7 @@ CONFIG_SPL_LOAD_FIT=y
 CONFIG_SPL_LOAD_FIT_ADDRESS=0x81000000
 # CONFIG_USE_SPL_FIT_GENERATOR is not set
 CONFIG_OF_BOARD_SETUP=y
-CONFIG_BOOTCOMMAND="run findfdt; run envboot; run init_${boot}; if test ${boot_fit} -eq 1; then run get_fit_${boot}; run get_overlaystring; run run_fit; else; run get_kern_${boot}; run get_fdt_${boot}; run get_overlay_${boot}; run run_kern; setenv fdtfile ti/${name_fdt}; fi; run distro_bootcmd"
+CONFIG_BOOTCOMMAND="run findfdt; run envboot; run init_${boot}; if test ${boot_fit} -eq 1; then run get_fit_${boot}; run get_overlaystring; run run_fit; else; run get_kern_${boot}; run get_fdt_${boot}; run get_overlay_${boot}; run run_kern; fi; run distro_bootcmd"
 CONFIG_FIT_SIGNATURE=y
 CONFIG_RSA=y
 CONFIG_LOGLEVEL=7

-- 
2.34.1