[PATCH v2 01/13] spi: rockchip_sfc: Use linux rockchip,sfc-no-dma prop

[Jonas Karlman]

Use the same prop as linux to control the use of fifo or dma mode. Also
add a u-boot,spl-sfc-no-dma prop to control the same in SPL.

Signed-off-by: Jonas Karlman <jonas at kwiboo.se>
Reviewed-by: Kever Yang <kever.yang at rock-chips.com>
---
v2:
- Use IS_ENABLED(CONFIG_SPL_BUILD) instead of ifdef
- Collect r-b tag

 drivers/spi/rockchip_sfc.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/spi/rockchip_sfc.c b/drivers/spi/rockchip_sfc.c
index 851a6482985b..596c22aa0108 100644
--- a/drivers/spi/rockchip_sfc.c
+++ b/drivers/spi/rockchip_sfc.c
@@ -227,10 +227,10 @@ static int rockchip_sfc_ofdata_to_platdata(struct udevice *bus)
 	struct rockchip_sfc *sfc = dev_get_plat(bus);
 
 	sfc->regbase = dev_read_addr_ptr(bus);
-	if (ofnode_read_bool(dev_ofnode(bus), "sfc-no-dma"))
-		sfc->use_dma = false;
-	else
-		sfc->use_dma = true;
+	sfc->use_dma = !dev_read_bool(bus, "rockchip,sfc-no-dma");
+
+	if (IS_ENABLED(CONFIG_SPL_BUILD) && sfc->use_dma)
+		sfc->use_dma = !dev_read_bool(bus, "u-boot,spl-sfc-no-dma");
 
 #if CONFIG_IS_ENABLED(CLK)
 	int ret;
-- 
2.40.1