[PATCH] rockchip: Pinebook Pro: Fix emmc default configuration

[Kever Yang]

On 2023/5/1 15:43, Wolfgang Zarre wrote:
> If u-boot is installed on the internal emmc, then this will
> allow to boot without failure.
>
> Signed-off-by: Wolfgang Zarre <lxdev12 at zirdeon.com>
Reviewed-by: Kever Yang <kever.yang at rock-chips.com>

Thanks,
- Kever
> ---
>
>   configs/pinebook-pro-rk3399_defconfig | 12 ++++++++++--
>   1 file changed, 10 insertions(+), 2 deletions(-)
>
> diff --git a/configs/pinebook-pro-rk3399_defconfig b/configs/pinebook-pro-rk3399_defconfig
> index dff4695e37..58a8b91aa6 100644
> --- a/configs/pinebook-pro-rk3399_defconfig
> +++ b/configs/pinebook-pro-rk3399_defconfig
> @@ -6,6 +6,7 @@ CONFIG_TEXT_BASE=0x00200000
>   CONFIG_NR_DRAM_BANKS=1
>   CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
>   CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000
> +CONFIG_SF_DEFAULT_SPEED=20000000
>   CONFIG_ENV_SIZE=0x8000
>   CONFIG_ENV_OFFSET=0x3F8000
>   CONFIG_DEFAULT_DEVICE_TREE="rk3399-pinebook-pro"
> @@ -18,6 +19,7 @@ CONFIG_DEBUG_UART_CLOCK=24000000
>   CONFIG_SPL_SPI_FLASH_SUPPORT=y
>   CONFIG_SPL_SPI=y
>   CONFIG_SYS_LOAD_ADDR=0x800800
> +CONFIG_PCI=y
>   CONFIG_DEBUG_UART=y
>   CONFIG_BOOTDELAY=3
>   CONFIG_USE_PREBOOT=y
> @@ -57,17 +59,23 @@ CONFIG_LED=y
>   CONFIG_LED_GPIO=y
>   CONFIG_MISC=y
>   CONFIG_ROCKCHIP_EFUSE=y
> +CONFIG_MMC_IO_VOLTAGE=y
> +CONFIG_SPL_MMC_IO_VOLTAGE=y
> +CONFIG_MMC_UHS_SUPPORT=y
> +CONFIG_SPL_MMC_UHS_SUPPORT=y
> +CONFIG_MMC_HS400_ES_SUPPORT=y
> +CONFIG_SPL_MMC_HS400_ES_SUPPORT=y
> +CONFIG_MMC_HS400_SUPPORT=y
> +CONFIG_SPL_MMC_HS400_SUPPORT=y
>   CONFIG_MMC_DW=y
>   CONFIG_MMC_DW_ROCKCHIP=y
>   CONFIG_MMC_SDHCI=y
>   CONFIG_MMC_SDHCI_SDMA=y
>   CONFIG_MMC_SDHCI_ROCKCHIP=y
>   CONFIG_SF_DEFAULT_BUS=1
> -CONFIG_SF_DEFAULT_SPEED=20000000
>   CONFIG_SPI_FLASH_GIGADEVICE=y
>   CONFIG_SPI_FLASH_WINBOND=y
>   CONFIG_NVME_PCI=y
> -CONFIG_PCI=y
>   CONFIG_PHY_ROCKCHIP_INNO_USB2=y
>   CONFIG_PHY_ROCKCHIP_TYPEC=y
>   CONFIG_DM_PMIC_FAN53555=y