[PATCH 2/4] arm: dts: k3-j7200: Add Main domain ESM support

[Neha Malcom Francis]

From: Gowtham Tammana <g-tammana at ti.com>

Main domain ESM support is needed to configure main domain watchdog
interrupts to generate ESM pin events. On J7200 boards ESM error pin
output is propagated to PMIC to generate reset.

Signed-off-by: Gowtham Tammana <g-tammana at ti.com>
Signed-off-by: Neha Malcom Francis <n-francis at ti.com>
---
 arch/arm/dts/k3-j7200-main.dtsi | 7 +++++++
 arch/arm/dts/k3-j7200.dtsi      | 1 +
 2 files changed, 8 insertions(+)

diff --git a/arch/arm/dts/k3-j7200-main.dtsi b/arch/arm/dts/k3-j7200-main.dtsi
index e8a41d09b4..d8db2d2d01 100644
--- a/arch/arm/dts/k3-j7200-main.dtsi
+++ b/arch/arm/dts/k3-j7200-main.dtsi
@@ -774,4 +774,11 @@
 			ti,loczrama = <1>;
 		};
 	};
+
+	main_esm: esm at 700000 {
+		compatible = "ti,j721e-esm";
+		reg = <0x0 0x700000 0x0 0x1000>;
+		ti,esm-pins = <656>, <657>;
+		bootph-pre-ram;
+	};
 };
diff --git a/arch/arm/dts/k3-j7200.dtsi b/arch/arm/dts/k3-j7200.dtsi
index b7005b8031..9252d97399 100644
--- a/arch/arm/dts/k3-j7200.dtsi
+++ b/arch/arm/dts/k3-j7200.dtsi
@@ -124,6 +124,7 @@
 		#size-cells = <2>;
 		ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */
 			 <0x00 0x00600000 0x00 0x00600000 0x00 0x00031100>, /* GPIO */
+			 <0x00 0x00700000 0x00 0x00700000 0x00 0x00001000>, /* ESM */
 			 <0x00 0x00a40000 0x00 0x00a40000 0x00 0x00000800>, /* timesync router */
 			 <0x00 0x01000000 0x00 0x01000000 0x00 0x0d000000>, /* Most peripherals */
 			 <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>, /* MAIN NAVSS */
-- 
2.34.1