[PATCH v4 00/11] Add ethernet driver for StarFive JH7110 SoC

Yanhong Wang yanhong.wang at starfivetech.com
Thu May 25 11:36:26 CEST 2023


This series of patches base on the latest branch/master,and
adds ethernet support for the StarFive JH7110 RISC-V SoC.
The series includes EEPROM, PHY and MAC drivers. The PHY model is
YT8531 (from Motorcomm Inc), and the MAC version is dwmac-5.20
(from Synopsys DesignWare). 

The implementation of the phy driver is ported from linux, but it
has been adjusted for the u-boot framework.

EEPROM stores board-related information, such as DDR capacity, 
PCB version, MAC address, etc.

The main difference between StarFive VisionFive 2 1.2A and 1.3B is 
gmac, but the difference in gmac is not defined in DT, but reads the 
PCB version from EEPROM, and then dynamically configures the difference
of gmac according to different PCB versions, which is compatible 
with 1.2A and 1.3B versions, which is more user-friendly.

The PHY and MAC driver has been tested on the StarFive VisionFive 2 1.2A
and 1.3B boards and works normally.

For more information and support,you can visit RVspace wiki[1].	
[1] https://wiki.rvspace.org/

v4:
- Reworded the definition of the 'pbuf' variable in visionfive2-i2c-eeprom.c 
  from a const pointer to const union. 
- Added the section (".data") attribute to the 'pbuf' and 'has_been_read' global 
  variables in visionfive2-i2-eeprom.c.

v3:
- Added EEPROM support.
- Combine the board device tree of 1.2A and 1.3B into one.
- Removed the delay configuration of gmac phy clock from DT.
- Dynamically configure gmac differences of 1.2A and 1.3B to DT according to the PCB version.
- DDR capacity information is read from EEPROM first, if not, it is defined by default in DT.

v2:
- Reworded the phy driver. Added platform private data struct to save the 
  configuration data read from dts.
- Reworded the MAC driver. Added platform private data struct to save the 
  configuration data read from dts.

Previous versions:
v1 - https://patchwork.ozlabs.org/project/uboot/cover/20230317010536.17860-1-yanhong.wang@starfivetech.com/
v2 - https://patchwork.ozlabs.org/project/uboot/cover/20230329102720.25439-1-yanhong.wang@starfivetech.com/
v3 - https://patchwork.ozlabs.org/project/uboot/cover/20230428022515.29393-1-yanhong.wang@starfivetech.com/


Yanhong Wang (11):
  net: phy: Add driver for Motorcomm yt8531 gigabit ethernet phy
  net: dwc_eth_qos: Add StarFive ethernet driver glue layer
  eeprom: starfive: Enable ID EEPROM configuration
  ram: starfive: Read memory size information from EEPROM
  board: starfive: Dynamic configuration of DT for 1.2A and 1.3B
  riscv: dts: jh7110: Add ethernet device tree nodes
  riscv: dts: jh7110: Combine the board device tree files of 1.2A and
    1.3B
  riscv: dts: starfive: Add support eeprom device tree node
  doc: board: starfive: Reword the make defconfig information
  configs: starfive: Enable ethernet configuration for StarFive
    VisionFive2
  configs: starfive: Enable ID EEPROM configuration

 arch/riscv/cpu/jh7110/spl.c                   |  32 +-
 arch/riscv/dts/Makefile                       |   3 +-
 ... jh7110-starfive-visionfive-2-u-boot.dtsi} |  39 +-
 .../jh7110-starfive-visionfive-2-v1.2a.dts    |  12 -
 ...10-starfive-visionfive-2-v1.3b-u-boot.dtsi |  69 ---
 ...b.dts => jh7110-starfive-visionfive-2.dts} |   3 +-
 .../dts/jh7110-starfive-visionfive-2.dtsi     |  40 ++
 arch/riscv/dts/jh7110.dtsi                    |  69 +++
 arch/riscv/include/asm/arch-jh7110/eeprom.h   |  13 +
 board/starfive/visionfive2/Makefile           |   1 +
 board/starfive/visionfive2/spl.c              | 157 +++++
 .../visionfive2/starfive_visionfive2.c        |  13 +
 .../visionfive2/visionfive2-i2c-eeprom.c      | 561 ++++++++++++++++++
 configs/starfive_visionfive2_defconfig        |  32 +-
 doc/board/starfive/visionfive2.rst            |   6 +-
 drivers/net/Kconfig                           |   7 +
 drivers/net/Makefile                          |   1 +
 drivers/net/dwc_eth_qos.c                     |   6 +
 drivers/net/dwc_eth_qos.h                     |   1 +
 drivers/net/dwc_eth_qos_starfive.c            | 249 ++++++++
 drivers/net/phy/Kconfig                       |   6 +
 drivers/net/phy/Makefile                      |   1 +
 drivers/net/phy/motorcomm.c                   | 437 ++++++++++++++
 drivers/ram/starfive/starfive_ddr.c           |   2 -
 24 files changed, 1665 insertions(+), 95 deletions(-)
 rename arch/riscv/dts/{jh7110-starfive-visionfive-2-v1.2a-u-boot.dtsi => jh7110-starfive-visionfive-2-u-boot.dtsi} (58%)
 delete mode 100644 arch/riscv/dts/jh7110-starfive-visionfive-2-v1.2a.dts
 delete mode 100644 arch/riscv/dts/jh7110-starfive-visionfive-2-v1.3b-u-boot.dtsi
 rename arch/riscv/dts/{jh7110-starfive-visionfive-2-v1.3b.dts => jh7110-starfive-visionfive-2.dts} (65%)
 create mode 100644 arch/riscv/include/asm/arch-jh7110/eeprom.h
 create mode 100644 board/starfive/visionfive2/visionfive2-i2c-eeprom.c
 create mode 100644 drivers/net/dwc_eth_qos_starfive.c
 create mode 100644 drivers/net/phy/motorcomm.c


base-commit: 62df7a39442902a71259568c13a4d496d5a514f4
-- 
2.17.1



More information about the U-Boot mailing list