rk3328: No partition table found issue

[Belisko Marek]

Hi,

I'm using 2022.01 on rockpi-e and having an issue that some SDcards cannot
seem to have issue with accessing partitions. I have the same image flashed
on 2 SD cards. One boots fine and other one shows:

## Executing script at 00500000
Saving Environment to MMC... Writing to redundant MMC(1)... OK
** No partition table - mmc 1 **

whole log:
U-Boot 2022.01 (Jan 10 2022 - 18:46:34 +0000)

Model: Radxa ROCK Pi E
DRAM:  510 MiB
PMIC:  RK8050 (on=0x40, off=0x00)
MMC:   mmc at ff500000: 1, mmc at ff520000: 0
Loading Environment from MMC... *** Warning - bad CRC, using default
environment

In:    serial at ff130000
Out:   serial at ff130000
Err:   serial at ff130000
Model: Radxa ROCK Pi E
Net:   Could not get PHY for ethernet at ff540000: addr -1
No ethernet found.

Hit any key to stop autoboot:  0
switch to partitions #0, OK
mmc1 is current device
Scanning mmc 1:1...
Found U-Boot script /boot.scr
355 bytes read in 3 ms (115.2 KiB/s)
## Executing script at 00500000
Saving Environment to MMC... Writing to redundant MMC(1)... OK
** No partition table - mmc 1 **
Couldn't find partition mmc 1:2
Can't set block device
Wrong Image Format for bootm command

Is there maybe in newer u-boot some fix for this problem?

Thanks and BR,

marek

-- 
as simple and primitive as possible
-------------------------------------------------
Marek Belisko - OPEN-NANDRA
Freelance Developer

Ruska Nova Ves 219 | Presov, 08005 Slovak Republic
Tel: +421 915 052 184
skype: marekwhite
twitter: #opennandra
web: http://open-nandra.com